The Effect of Surface Oxides During Hot Pressing of TiB2

Hot pressing of TiB₂ has been investigated with particular emphasis on the evolution of secondary phases originating from the initial surface oxide layer on the TiB₂ powders. Carbothermal reduction of the surface oxides during sintering was also investigated by adding carbon to the TiB₂ powder. TiO_{1− x} C _x was shown to be the main secondary phase in hot-pressed TiB₂, and carbon was shown to strongly influence on sintering process and the amount, composition and distribution of the secondary phase TiO_{1− x} C _x . The formation of TiO_{1− x} C _x is discussed in relation to volatile boron oxide, which reacts with the graphite die to produce CO gas, which further may cause transport of carbon into TiB₂ during sintering before pore closure. Finally it was demonstrated that the density could be controlled by addition of carbon to the TiB₂ powder.     

Using lexical familiarity judgments to assess verbally mediated intelligence in aphasia.

In this study, a task using forced-choice lexical familiarity judgments of irregular versus archaic words (a newly developed measure called the Lexical Orthographic Familiarity Test; LOFT) was compared to a standardized oral word-reading measure (the Wechsler Test of Adult Reading; WTAR) in a group of 35 aphasic adults and a comparison group of 125 community dwelling, nonbrain damaged adults. When compared to the comparison group, aphasics had significantly lower scores on the WTAR but not the LOFT. Although both the WTAR and LOFT were significantly correlated with education in the nonbrain-damaged group, only the LOFT was correlated with education and also with the Barona full scale IQ index in the aphasic group. Lastly, WTAR performance showed a significantly greater relationship to the severity of language disorder in the aphasic group than did the LOFT. These results have both theoretical and clinical implications for the assessment of language-disordered adults, as they indicate that patients with aphasia may retain aspects of verbally mediated intelligence, and that the LOFT may provide a better estimate of premorbid functioning in aphasia than other currently available measures. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Improving local composition measurements of binary mixtures by image analysis

Composition quantification in granular mixtures through colorimetric imaging is addressed. Digital images of binary mixtures have been analysed with three different colour spaces: gray scale, L?a?b? and HSV. Experiments have been carried out on a small scale drum mixer. After blending, the mixtures have been impregnated with a binder, solidified and sliced. The colorimetric analysis has been carried out on the interior of the granular bed. Results obtained using the three colour-spaces have been performed and compared. The HSV colour space yields better results in terms of accuracy and computational effort. Effectiveness of HSV relies on its independence from shadows that are a distinctive feature of pictures of the three-dimensional granular surface. Very important, HSV does not require a calibration curve to convert colour information into composition, differently from the other colour spaces.     

Optimization of alternative options for SO2 emissions control in the Mexican electrical sector

This article develops a least-cost optimization model in terms of the projected SO₂ abatement costs of nine selected options for SO₂ emissions control in the 10 most polluting power plants of the Mexican electrical sector (MES)—including SO₂ scrubbing technologies, fuel oil hydrotreating desulphurization and fuel substitutions. The model not only finds the optimal combination of SO₂ control options and generating units at 10% reduction intervals referred to the total SO₂ emissions but also meets the restriction imposed in the NOM-085-ECOL-1994 (Mexican Official Norm) for allowable emission levels within critical zones. Similarly, two schemes are studied and analysed in this model: the first case considers the economical benefits derived from the substitution of fuel oil by imported low sulphur content coal in the Petacalco power plant and; the second case does not considered such economical benefits. Finally, results are obtained for these two cases in terms of the corresponding costs—investment, O&M, fuel—, abatement costs and the SO₂ emissions reduction.     

Densification and properties of zirconia prepared by three different sintering techniques

Densification of nanocrystalline yttria stabilized zirconia (YSZ) powder with 8 mol% Y₂O₃, prepared by a glycine/nitrate smoldering combustion method, was investigated by spark plasma sintering, hot pressing and conventional sintering. The spark plasma sintering technique was shown to be superior to the other methods giving dense materials (≥96%) with uniform morphology at lower temperatures and shorter sintering time. The grain size of the materials was 0.21, 0.37 and 12 μm after spark plasma sintering, hot pressing and conventional sintering, respectively. Total electrical conductivity of the materials showed no clear correlation with the grain size, but the activation energy for spark plasma sintered materials was slightly higher than for materials prepared by the two other densification methods. The hardness, measured by the Vickers indentation method, was found to be independent on grain size while fracture toughness, derived by the indentation method, was slightly decreasing with increasing grain size.     

From design of bio-based biocomposite electrospun scaffolds to osteogenic differentiation of human mesenchymal stromal cells

Electrospinning coupled with electrospraying provides a straightforward and robust route toward promising electrospun biocomposite scaffolds for bone tissue engineering. In this comparative investigation, four types of poly(3-hydroxybutyrate) (PHB)-based nanofibrous scaffolds were produced by electrospinning a PHB solution, a PHB/gelatin (GEL) mixture or a PHB/GEL/nHAs (hydroxyapatite nanoparticles) mixed solution, and by electrospinning a PHB/GEL solution and electrospraying a nHA dispersion simultaneously. SEM and TEM analyses demonstrated that the electrospun nHA-blended framework contained a majority of nHAs trapped within the constitutive fibers, whereas the electrospinning-electrospraying combination afforded fibers with a rough surface largely covered by the bioceramic. Structural and morphological characterizations were completed by FTIR, mercury intrusion porosimetry, and contact angle measurements. Furthermore, an in vitro investigation of human mesenchymal stromal cell (hMSC) adhesion and proliferation properties showed a faster cell development on gelatin-containing scaffolds. More interestingly, a long-term investigation of hMSC osteoblastic differentiation over 21 days indicate that hMSCs seeded onto the nHA-sprayed scaffold developed a significantly higher level of alkaline phosphatase activity, as well as a higher matrix biomineralization rate through the staining of the generated calcium deposits: the fiber surface deposition of nHAs by electrospraying enabled their direct exposure to hMSCs for an efficient transmission of the bioceramic osteoinductive and osteoconductive properties, producing a suitable biocomposite scaffold for bone tissue regeneration.     

Validated simulation of droplet sedimentation with finite-element and level-set methods

In the present paper freely sedimenting n-butanol droplets in water are simulated by means of computational fluid dynamics. The finite-element and the extended finite-element methods were implemented and evaluated. The level-set function is used for capturing the interface movement. The three-dimensional nonstationary simulations included the stages of droplet acceleration, deformation, and stability in terms of shape and velocity. The influence of the grid resolution, the computational domain walls, and the droplet initial velocity was investigated and quantified. The droplet diameters that were studied spanned the region of spherical, deformed, and oscillating droplets. The simulation results were compared to experiments and empirical models in terms of droplet shape, oscillation behavior and terminal velocity, showing good agreement. The extended finite-element method was found to provide simulation results in better accordance to the experiments and empirical models than the conventional finite-element method.     

Engineering functional doubly porous PHEMA-based materials

Functional doubly porous polymeric materials based on cross-linked poly(2-hydroxyethyl methacrylate) (PHEMA) were engineered via novel porogen templating methodologies. Two straightforward and versatile strategies were implemented through the use of either CaCO₃ microparticles or poly(methyl methacrylate) beads as macroporogens, in conjunction with either hydroxyapatite nanoparticles of around 200 nm average diameter or a porogenic solvent (e.g., ethanol) as nanoporogens. Upon porogen removal, macropores with dimensions in the 100 μm range were generated, while the second porosity lied within the 1 μm order of magnitude, as evidenced by mercury intrusion porosimetry and scanning electron microscopy. The possibility to further functionalize such biporous PHEMA-based frameworks was investigated through a two-step synthetic approach involving an activation stage, followed by the coupling of propargylamine as a model compound. The success of the functionalization procedure was clearly demonstrated by Raman spectroscopy that indicated the occurrence of alkyne functionality within the biporous materials.     

Autopsy of refractory lining in anode kilns with open and closed design

Aluminosilicate refractory lining constitutes a major part of anode baking kilns, and during anode baking the lining is exposed to harsh conditions which limits the lifetime. Here, autopsies of refractory linings from both an open and closed top furnace are reported aiming to determine the microstructural and mineralogical changes in the lining during operation. Significant variations in density and porosity were observed, both across the brick cross sections, but also for the vertical position in the lining. The chemical and mineralogical composition of the bricks were investigated by electron microscopy and X-ray diffraction. Only minor changes in the mineralogical composition of the materials were observed, and sodium originating from green anodes was only observed to a minor degree. Evidence of silicon oxide transport from the lower to the upper part of the linings was observed, reflecting the changes in reducing-oxidizing conditions during an anode baking cycle. The main degradation mechanisms in these linings were due to densification of the material over time, particularly the uneven densification across a lining wall. The present findings are discussed and related to the main differences in the two furnace designs.     

Microstructure and the influence of spontaneous strain in LaCoO3, La0.8Sr0.2CoO3 and La0.8Ca0.2CoO3

Transmission Electron Microscopy has been conducted on rhombohedral perovskite oxides with composition LaCoO₃, La_0.8Sr_0.2CoO₃, and La_0.8Ca_0.2CoO₃. Thin foils prepared within the first weeks of sintering showed macroscopic strain and a very high defect density, which included fault-related superlattice structures. Samples prepared several months after sintering, showed no significant macroscopic strain and the main defect was found to be domains due to reflection twinning in the pseudo-cube plane. The behaviour is likely to be related to accomodation of spontaneous strain arising upon cooling of the material from the sintering temperature. The presence of twin domains illustrates the lowering of lattice symmetry as compared to the ideal cubic perovskite structure, and is relevant for explaining recent observations of ferroelastic behaviour of these materials.