塔巴庙区块气层录井参数分析研究

塔巴庙区块气藏属于低压、低渗气藏,储集层物性差异大、含气级别高,但含气非均质性强,录井解释评价困难。针对这一问题,开展了综合判断储集层物性和含气性方面的研究,分别探讨了钻时与全烃、钻井液性能与全烃、钻井液粘度与全烃、气测显示与测井参数和烃组分与气显示之间的关系,分析了其相关性及其在塔巴庙区块气层解释评价中的意义及作用。通过相关性研究,不但摸索出定性解释评价气层的方法,同时为今后深入研究录井相关参数关系,探索其内在规律,为实现准确解释评价储集层奠定了基础。     

Preparation of branched polyacrylonitrile through self‐condensing vinyl copolymerization

Branched polyacrylonitrile (PAN) was prepared through a self‐condensing vinyl copolymerization of acrylonitrile and 2‐(2‐bromopropionyloxy)ethyl acrylate (BPEA). The branched architecture of the product was confirmed by NMR spectra and the average degree of branching (DB ) was estimated. Through a comparison of the intrinsic viscosity of the product with that of its linear analogue, the contraction factor g′ was calculated. It was found that the viscosity of the branched PAN was obviously lower that that of linear PAN. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

全封闭Ar气保护电渣重熔GH4169合金

上海五钢采用ALD 5t全封闭Ar气保护电渣重熔炉 ESR(Ar)冶炼了GH4 16 9合金锭 ,分析结果表明 ,ESR(Ar)电渣锭氧、硫含量和锭头尾碳、铝、钛之差远低于一般ESR工艺 ;VIM(真空感应熔炼 ) +ESR(Ar)工艺冶炼合金中平均氧含量 6× 10 - 6 远低于VIM +VAR(真空电弧重熔 )工艺冶炼合金中平均氧含量 13× 10 - 6 ,所以ESR(Ar)工艺脱氧效果优于VAR工艺     

使用地热能的吸收式制冷系统

吸收式制冷系统可以利用低品位的热源来制冷，相对于常见的蒸汽压缩式制冷系统而言在这方面具有优势。我国是一个地热资源很丰富的国家，为了充分利用这一资源，我们有必要对以地热为热源的吸收式制冷系统进行研究。本文着重分析了使用地热资源的溴化锂吸收式制冷系统。     

汽车空调制冷系统中应用R407C的分析

本文对混合工质R407C与R12的物理和热力性质进行了比较分析，并针对汽车空调制冷系统的特点，对两种工质在变工况下进行了制冷系统的理论循环分析，阐明了在汽车空调制冷系统中使用R407C的可行性。     

Metal micromolding: further experiments and preliminary finite element analysis

We report results of instrumented microscale compression molding experiments on Al with Ta mold inserts. The Ta inserts have high-aspect-ratio microscale structures fabricated by micro-electrical-discharge-machining. These microscale structures were further surface engineered by electrochemical polishing, followed by deposition of a conformal amorphous hydrogenated carbon based coating. The molding response of Al, in terms of molding force versus insert displacement, was measured in situ with a high-vacuum, instrumented, compression molding apparatus, and rationalized with a simple model on the mechanics of molding. Molding response was further studied numerically through finite element analysis.     

玻璃与金属封接用杜美丝

利用ＡＥＳ、ＷＤＳ和ｘ－射线衍射等方法，研究了杜美丝表面层、铁镍芯与覆铜层界面的微观结构与特性。结果表明：良好的表面层应由Ｃｕ２Ｏ和非晶态的硼砂构成；玻璃与杜美丝的润湿性决定于表面层的净化程度和构成及加热条件。