A new method for calculating loss coefficients [of power systems]

A method is proposed which avoids many limitations associated with traditional B-coefficient loss coefficient calculation. The proposed method, unlike the traditional B-coefficient method, is very fast and can handle line outages. The method utilizes network sensitivity factors which are established from DC load flow solutions, Line outage distribution factors (ODFs) are formulated using changes in network power generations to simulate the outaged line from the network. The method avoids the use of complicated reference frame transformations based upon Kron's tenser analysis. The necessity of data normalization used in least squares and the evaluation of the slope of &thetas;_j versus PG_n is not necessary with the proposed method. Using IEEE standard 14-bus and 30-bus systems, the method's results are compared against results obtained from an AC load flow program (LFED). The method's solution speed is compared to that of the LFED method, the base case database method and the conventional B-coefficient method based on A_jn-factor. The proposed method is easy to implement and, when compared to other methods, has exhibited good accuracy and rapid execution times. The method is well suited to online dispatch applications     

Numerical Simulation of Deforming Manufacture Process for Automobile Bevel Gear Blank

1 Introduction Rear axle bevel gearis a vital kind of annular accessory with high precision and hugeload availablefeatures ,andit is widely used as the differential drive in automobiles and tractor .In China ,the traditional manufactureapproach of producing the rear axle bevel gear blankis die forging,which not only requires a highinvestment ofproduct equipments , but also involves a low material utilization and great noise .In order to overcome thesedrawbacks , manyresearchers have done a gre…     

西门子S7-200可编程控制器在气化油点火技术中的应用

以西门子S7—200PLC为核心。利用火检探头。温度、压力等传感器，结合STEP 7 MicmwIN V3．1以及ProTool Pro CS工业组态软件完成了对点火过程的自动控制。实现了西门子S7—200PLC在大型发电厂410吨级蒸汽锅炉“气化油直接点燃煤粉技术”中的应用。提高了锅炉点火系统运行的自动化水平。     

双能X射线骨密度仪测定技术研究

以Ｌｕｎａｒ公司ＤＰＸ－Ｌ型双能Ｘ射线骨密度仪为例，研究引起测量误差的主要因素并提出质控措施。用自检模块、腰椎体膜评定仪器的体外测量精度好于１％。对１０位志愿者重复２次测量，体内精度对腰椎，ＭＰＤ（平均百分差）为０．４６，ＣＶ（变异系数）为０．７５；对股骨颈，ＭＰＤ为１．２６、ＣＶ为０．４７；Ｗａｒｄ’ｓ三角区ＭＰＤ为２．０１、ＣＶ为１．１４；大转子ＭＰＤ为１．６６、ＣＶ为０．７２。扫描图像由２位     

Optimization of a schottky barrier mixer diode in the submillimeter wave region

We have designed a mixer Schottky barrier diode (SBD) for use in the submillimeter wave region with a structure optimized for minimum noise temperature. The dependence of mixer noise temperature upon thickness and doping density of the epitaxial layer and diode diameter of SBDs was simulated within the framework of existing theories. Special care was taken to formulate the SBD current-voltage and capacitance-voltage relations in a way that correctly describes the behavior of real SBDs.     

Enhanced Oil Recovery: The Synthesis of Anthraquinone [1, 2-C] Alkylisoxazole

Anthraquinone [1, 2-C] methylisoxazole is synthesized from 2-ethylanthraquinone through nitration and treating with oleum. The different methods of 2-ethylanthraquinone nitrated were discussed. The optimum conditions were determined. The structure of the product was confirmed by MS and ¹H NMR.     

Cell cycle regulation of the Saccharomyces cerevisiae polo-like kinase cdc5p

Progression through and completion of mitosis require the actions of the evolutionarily conserved Polo kinase. We have determined that the levels of Cdc5p, a Saccharomyces cerevisiae member of the Polo family of mitotic kinases, are cell cycle regulated. Cdc5p accumulates in the nuclei of G2/M-phase cells, and its levels decline dramatically as cells progress through anaphase and begin telophase. We report that Cdc5p levels are sensitive to mutations in key components of the anaphase-promoting complex (APC). We have determined that Cdc5p-associated kinase activity is restricted to G2/M and that this activity is posttranslationally regulated. These results further link the actions of the APC to the completion of mitosis and suggest possible roles for Cdc5p during progression through and completion of mitosis.     

NCD－环上模的理论探讨

研究了ＮＣＤ－环上模Ｍ，在模半理想的条件下，可得到一些有趣的结果。     

Comparison of protein adsorption isotherms and uptake rates in preparative cation-exchange materials

Adsorption isotherms and effective diffusivities of lysozyme in a set of six preparative cation-exchange stationary phases were determined from batch uptake data in a stirred vessel. Both a pore diffusion and a homogeneous diffusion model were used in estimating diffusivities, with the isotherms fitted to a non-Langmuirian analytical isotherm equation. The capacities inferred from the isotherms are found to be correlated with the surface area accessible to lysozyme, the effective surface concentrations obtained being in agreement with values measured by different methods in various non-chromatographic systems. The pore diffusivities show systematic trends with protein and salt concentration, and effects of pore size and connectivity are also evident. Some trends in the homogeneous diffusivities are quite different to those in the pore diffusivities, but these differences largely disappear when the homogeneous diffusivities are rescaled to account for adsorption equilibrium behavior. Additional information is required to elucidate further the mechanisms of coupled diffusion and adsorption in stationary phases.