金选别工艺的发展与深化

本文阐述了充分考虑矿石性质,探索出混合浮选的分步流程,恰当的施用多元扑收剂所产出的“协同效应”,稳定和强化选别工艺,收到提高选金技术指标的效果。     

Study on heat conduction and adsorption/desorption characteristic of MIL-101/few layer graphene composite

Journal of Porous Materials - Aiming at the poor heat conduction performance of porous MIL-101 applied in adsorption cooling process, few layer graphene (FLG) was selected as a promising thermal...     

Adsorption characteristics of hexadecyl ammonium with different numbers of carbon chains in montmorillonite and the structure of the prepared composites

Journal of Porous Materials - The dynamics and thermodynamics of adsorption of hexadecyl ammonium with different numbers of carbon chains in montmorillonite (Mt) with different layer charge density...     

安全监控系统在火电厂煤仓的应用

介绍了安全监控系统在煤仓的应用情况,分析了该系统的作用、工作原理、组织构架、实现步骤、存在问题及解决方案等,实现对煤仓的自动监测预警.通过煤仓安全监控系统有效监视煤仓内部原煤输送状态及安全状态,确保煤仓安全,提高输煤系统的自动化水平.     

国内轴承钢的生产现状及发展

介绍了2002年国内高碳铬轴承钢的产量及品种结构，评述了国内轴承钢生产工艺装备、质量状况和发展方向。     

含砷氰化尾矿回填利用污染控制技术试验研究

针对某黄金生产企业含砷氰化尾矿污染特征,开展了搅拌洗涤法、臭氧氧化法、酸化溶砷法、铁盐固砷法等多种无害化方法联合处理试验研究,旨在将该含砷氰化尾矿处理至满足氰渣规范回填利用污染控制要求。结果表明：该含砷氰化尾矿回填利用污染控制技术工艺为压滤调浆搅拌洗涤+臭氧氧化+酸化溶砷+铁盐固砷,最佳参数为原矿浆压滤后加水调浆,矿浆浓度40%,臭氧投加量0.66 g/L,酸化溶砷pH值3、曝气量0.1 m³/h、反应时间2 h,铁盐固砷七水合硫酸亚铁投加量20.0 g/L、反应时间1 h。研究结果为该黄金生产企业含砷氰化尾矿回填利用提供了技术支撑。     

Research and Applications of Semi-solid Processing

Since it was pioneered by Flemings and otherresearchers [11, the semi-solid metal processingtechnique has been widely stUdied in the world.Especially in the past decade, SSM as a newproduct forming technique has been rapidly developed and put into commercial applications[2, 31. In recent years, with the development ofthe ado-industry of China, a lot of researchwork on SSM has been done, including the preparation of slumes, reheating and thixoforming[Al6]; moreover, great achievements have …     

多种氧化物改性对BaTiO3介电性能的影响

采用共沉淀BaTiO3为基,适量掺杂Nd2O3稀土氧化物及MgO与ZnO添加剂,获得具有X7R温度特性的低频高压MLC瓷料系统,BaTiO3基瓷的平均晶粒尺寸小于0.8μm,居里点弥散成为居里区.其介电性能为介电系数ε≥3000;容量变化率△C/C≤±15%;介电损耗tgδ≤120×10-4;体积电阻率ρv≥1012Ω·cm;击穿场强Eb≥15 kV/mm.     

Study on the machinability of resulfurized composite free-cutting steels

The machinability of S, S-Ca, S-RE, and S-RE-Ca system resulfurized composite free-cutting steels were investigated, where RE is rare earths, mostly cerium. The experimental results showed that in the low cutting speed range (≤35 m/min), the S-RE system free-cutting steel had better machinability than the others and that the S-RE-Ca system free-cutting steel exhibited the best machinability at high cutting speeds. A protective layer capable of preventing diffusion wear was formed on the rake face of a P30 tool when S-RE-Ca system free-cutting steel was machined in the cutting speed range of 120 to 160 m/min.     

各向异性Sm2Fe17Nx磁粉的结构与磁性能

研究了Sm2Fe12Nx磁粉的制备、结构与磁性能，发现Sm—Fe合金的铸态组织主要由Sm2Fe17、α—Fe和SmFe2三种物相组成，而经过1000℃均匀化退火48h处理后富Sm的SmFe2相基本消失，α—Fe相的品粒变小，数量减少。随着氯化时间延长到10h，Sm2Fe17相始终未改变其Th2Zn17型结构，而氯原子浓度增加，所有的X射线衍射峰均向小角度方向移动；但在氮化时间超过10h后，物相要发生变化，导致磁性能降低。在500℃下流动的氮气氛中对Sm2Fe17合金氮化2、4、6、10h未加磁场取向的磁粉中，以氮化6h的磁性能值最高：σr＝35．44Am^2/kg(emu／g)，Hc＝58kA／m(729．03Oe)。磁性能值偏低的原因与测量磁场较低，粒径分布不均匀及粒径较大有关。