Reconceptualising territoriality and spatial planning: insights from the sea

The concept of territoriality and its relationship to the focus and substance of spatial planning is the subject of much interest at the present time and this paper seeks to contribute to the debate by stepping into the sea. The first part of the paper establishes a framework for considering the spatial planning implications of changing conceptions of territoriality, outlining key sources of territorial innovation and their implications in terms of the development of new units and styles of governance, new challenges for planning practice, and the potential for feedback informing the development of planning theory. The application of the framework is then illustrated in the second part of the paper with reference to the emerging field of maritime spatial planning and in particular to the pioneering work that is being undertaken in Europe. This work is testing established notions of territoriality by highlighting the strong and growing connections between the land and the sea. Here some of the key implications for future spatial planning practice are identified. These indicate that there is a growing recognition of the need for innovation in the territorial units of governance in maritime regions and in the themes, processes and methods of spatial planning in these areas. The paper concludes with some observations on the implications of these findings for the theory of spatial planning.     

Gas permeation in thin films of “high free-volume” glassy perfluoropolymers: Part I. Physical aging

Physical aging of both thick and thin films of “high free-volume” glassy perfluoropolymers was studied by monitoring changes in pure gas permeability of O₂, N₂ and CH₄. All permeability measurements were done at a fixed temperature of 35 °C for more than 1000 h of aging. Two grades of perfluoropolymers, Teflon AF and Hyflon AD, having different comonomer structures but with similar comonomer ratios were studied to understand the effect of comonomer type and content on the aging behavior. The effect of casting process (solution vs. spin coating) and solvent type (vapor pressure and boiling point) had a significant effect on the absolute permeability of both thick and thin films; however, the aging rates were more affected by thickness and solvent type rather than the casting process for similar thicknesses. After 1000 h of aging, the relative permeability for thin films of Teflon AF 2400 was decreased by 27% compared to only 10% for thick films prepared from Novec 7500 solvent. Teflon AF, which has a higher fractional free volume (FFV) than Hyflon AD, is believed to undergo significant aging well before the initial permeability measurement could be made (after ∼ 1 h of aging) and, therefore, Teflon AF materials showed a lower decrease in relative permeability compared to Hyflon AD for the same aging time. The comonomer type and content has a significant effect on the permeability; the initial absolute oxygen permeability for AF 2400 was an order of magnitude higher compared to AD 60. The physical aging of thin films of the various glassy perfluoropolymers was also tracked by recording changes in the refractive index and thickness with time by ellipsometry. The ellipsometry data also confirmed higher aging rates in Hyflon AD compared to Teflon AF materials. The volumetric aging rate, obtained from the change in the refractive index using the Lorentz–Lorenz equation, and the permeability reduction rate from the (P_1000h/P_1h) ratio showed an excellent linear correlation. The (P_1000h/P_1h) ratio also showed a stronger correlation with (T_g−35) °C than with FFV.     

Influence of polyimide precursor synthesis route and ortho-position functional group on thermally rearranged (TR) polymer properties: Conversion and free volume

Thermal rearrangement of polyimides with ortho-position groups to polybenzoxazoles and related structures has been of recent interest for producing gas separation membranes. This study explores the influence of synthesis route and ortho-position functional group on the thermal rearrangement process and the fractional free volume of thermally rearranged (TR) polymers produced from polyimides derived from 3,3′-dihydroxy-4,4′-diamino-biphenyl and 2,2′-bis-(3,4-dicarboxyphenyl) hexafluoropropane dianhydride (HAB–6FDA). Acetate, propanoate, and pivalate ortho-position functional groups were considered. Thermogravimetric analysis (TGA) was used to study thermal rearrangement at temperatures between 350 and 450 °C, and evolved gases from TGA were analyzed via mass spectrometry to characterize the byproducts of thermal rearrangement and thermal degradation. CO₂ was the major byproduct of thermal rearrangement for all samples, and its evolution began well before the onset of thermal degradation. When non-hydroxyl ortho-position groups were present in the polymers, several byproducts other than CO₂ were also observed due to the loss of these ortho-position groups before thermal rearrangement. Free volume generally increased with increasing extent of thermal rearrangement, but precise values of free volume could not be accurately determined for polymers with propanoate and pivalate ortho-position functional groups due to uncertainties in the chemical structure of partially converted materials. For polymers with acetate and hydroxyl ortho-position groups, free volume could be determined within the uncertainty of density measurements. Thermal rearrangement behavior and free volume results for acetate containing polymers synthesized via different routes were very similar. Based on these results, the chemical structure of the ortho-position functional group has a larger impact on TR polymer properties than the polyimide precursor synthesis route.     

Facilitating GL13K Peptide Grafting on Polyetheretherketone via 1-Ethyl-3-(3-dimethylaminopropyl)carbodiimide: Surface Properties and Antibacterial Activity

In the present work, the antimicrobial peptide (AMP) of GL13K was successfully coated onto a polyetheretherketone (PEEK) substrate to investigate its antibacterial activities against Staphylococcus aureus (S. aureus) bacteria. To improve the coating efficiency, 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) was mixed with a GL13K solution and coated on the PEEK surface for comparison. Both energy-dispersive X-ray spectroscopy (EDX) and X-ray photoelectron spectroscopy (XPS) data confirmed 30% greater peptide coating on PEEK/GL13K-EDC than PEEK without EDC treatment. The GL13K graft levels are depicted in the micrograms per square centimeter range. The PEEK/GL13K-EDC sample showed a smoother and lower roughness (Rq of 0.530 µm) than the PEEK/GL13K (0.634 µm) and PEEK (0.697 µm) samples. The surface of the PEEK/GL13K-EDC was more hydrophilic (with a water contact angle of 24°) than the PEEK/GL13K (40°) and pure PEEK (89°) samples. The pure PEEK disc did not exhibit any inhibition zone against S. aureus. After peptide coating, the samples demonstrated significant zones of inhibition: 28 mm and 25 mm for the PEEK/GL13K-EDC and PEEK/GL13K samples, respectively. The bacteria-challenged PEEK sample showed numerous bacteria clusters, whereas PEEK/GL13K contained a little bacteria and PEEK/GL13K-EDC had no bacterial attachment. The results confirm that the GL13K peptide coating was able to induce antibacterial and biofilm-inhibitory effects. To the best of our knowledge, this is the first report of successful GL13K peptide grafting on a PEEK substrate via EDC coupling. The present work illustrates a facile and promising coating technique for a polymeric surface to provide bactericidal activity and biofilm resistance to medical implantable devices.     

Assessing support alternatives for longwall gateroads subject to changing stress

Longwall gateroad entries are subject to changing horizontal and vertical stress induced by redistribution of loads around the extracted panel. The stress changes can result in significant deformation of the entries that may include roof sag, rib dilation, and floor heave. Mine operators install different types of supports to control the ground response and maintain safe access and ventilation of the longwall face. This paper describes recent research aimed at quantifying the effect of longwall-induced stress changes on ground stability and using the information to assess support alternatives. The research included monitoring of ground and support interaction at several operating longwall mines in the U.S., analysis and calibration of numerical models that adequately represent the bedded rock mass, and observation of the support systems and their response to changes in stress. The models were then used to investigate the impact of geology and stress conditions on ground deformation and support response for various depths of cover and geologic scenarios. The research results were summarized in two regression equations that can be used to estimate the likely roof deformation and height of roof yield due to longwall-induced stress changes. This information is then used to assess the ability of support systems to maintain the stability of the roof. The application of the method is demonstrated with a retrospective analysis of the support performance at an operating longwall mine that experienced a headgate roof fall. The method is shown to produce realistic estimates of gateroad entry stability and support performance, allowing alternative support systems to be assessed during the design and planning stage of longwall operations.     

A Strategic Approach to Conservation Planning for Coastal New Zealand Landscapes

In New Zealand's lowland production landscapes less than 5% of the land comprises native vegetation. The continuing loss of lowland habitats remains, as the New Zealand Biodiversity Strategy (2000) recognized, one of the most intractable of New Zealand's conservation problems. The reasons behind this loss are explored and possible approaches to arresting this decline are considered. Field research was undertaken in two coastal plains landscapes. The purpose of the research was to examine the extent and character of native habitats remaining on the plains. A database comprising data on 744 sites with predominantly native habitats was created. The majority of these sites were not included on existing conservation databases and as such fall outside the remit of existing conservation planning and management processes. The study indicates that if the decline of native habitats on the plains is to be halted and reversed, a new approach to conservation planning is needed. A strategic planning approach to conservation is required, based on ecological regions where the focus is on co-ordinated planning of natural areas at the landscape scale.     

Polybrominated diphenyl ethers in the sediments of the Great Lakes. 3. Lakes Ontario and Erie

Sediment cores were taken in 2002 in Lakes Ontario and Erie at four locations. A total of 48 sediment samples were characterized, dated using 210Pb, and analyzed for 10 congeners of polybrominated diphenyl ethers (PBDEs) including BDE209 as well as 39 congeners of polychlorinated biphenyls (PCBs). The surficial concentrations of nine tri- through hepta-BDE congeners (sigma9PBDE) are 4.85 and 6.33 ng g(-1), at sampling sites ON40 and ON30 in Lake Ontario, and 1.83 and 1.95 ng g(-1) at ER37 and ER09 in Lake Erie, respectively, based on dry sediment weight. The surficial BDE209 concentrations are 242 and 211 ng g(-1) at ON40 and ON30 and 50 and 55 ng g(-1) at ER37 and ER09. The sigma(9-) PBDEs fluxes to the sediment around 2002 are 147 and 195 pg cm(-2) year(-1) at ON40 and ON30 and 136 and 314 pg cm(-2) year(-1) at ER37 and ER09, respectively. The fluxes of BDE209 are 6.5 and 7.3 ng cm(-2) year(-1) at ON30 and ON40 and 3.7 and 8.9 ng cm(-2) year(-1) at ER37 and ER09, respectively. Dramatic increases in PBDE concentrations and fluxes upward toward the sediment surface and the present time are evident at both locations in Lake Ontario, while PCBs concentrations peak in the middle of sediment cores around the dated time of 1970s and 1960s. For both locations of Lake Erie, the increasing trends of both PBDEs and PCBs from the bottom to the surficial segments were distorted by sediment mixing. BDE209 is the most abundant congener among PBDEs in the sediments, constituting about 96 and 91% of the total PBDEs on mass basis in Lakes Ontario and Erie, respectively.     

Ecological consequences of hydropower development in Central America: impacts of small dams and water diversion on neotropical stream fish assemblages

Small dams for hydropower have caused widespread alteration of Central American rivers, yet much of recent development has gone undocumented by scientists and conservationists. We examined the ecological effects of a small hydropower plant (Doña Julia Hydroelectric Center) on two low‐order streams (the Puerto Viejo River and Quebradon stream) draining a mountainous area of Costa Rica. Operation of the Doña Julia plant has dewatered these streams, reducing discharge to ～10% of average annual flow. This study compared fish assemblage composition and aquatic habitat upstream and downstream of diversion dams on two streams and along a ～4 km dewatered reach of the Puerto Viejo River in an attempt to evaluate current instream flow recommendations for regulated Costa Rican streams. Our results indicated that fish assemblages directly upstream and downstream of the dam on the third order Puerto Viejo River were dissimilar, suggesting that the small dam (< 15 m high) hindered movement of fishes. Along the ～4 km dewatered reach of the Puerto Viejo River, species count increased with downstream distance from the dam. However, estimated species richness and overall fish abundance were not significantly correlated with downstream distance from the dam. Our results suggested that effects of stream dewatering may be most pronounced for a subset of species with more complex reproductive requirements, classified as equilibrium‐type species based on their life‐history. In the absence of changes to current operations, we expect that fish assemblages in the Puerto Viejo River will be increasingly dominated by opportunistic‐type, colonizing fish species. Operations of many other small hydropower plants in Costa Rica and other parts of Central America mirror those of Doña Julia; the methods and results of this study may be applicable to some of those projects. Copyright © 2006 John Wiley & Sons, Ltd.     

Properties of ZnO Thin Films Codoped with Lithium and Phosphorus

The properties of ZnO thin films codoped with lithium and phosphorus have been characterized. The films were deposited from high-purity ZnO and Li₃PO₄ solid targets onto c-plane sapphire substrates by radiofrequency (RF) magnetron sputtering. A substrate temperature of 900°C was determined as optimum for depositing undoped ZnO films with background electron concentration of 9.9 × 10¹⁵ cm^?3 as the buffer layer on the sapphire substrate. Postdeposition annealing was carried out using rapid thermal processing in O₂ at temperatures ranging from 500°C to 1000°C for 3 min. Analyses performed using low-temperature photoluminescence spectroscopy measurements revealed luminescence peaks at 3.356 eV, 3.307 eV, 3.248 eV, and 3.203 eV at 12 K for the codoped samples. X-ray diffraction 2θ-scans showed a single peak at about 34.4° with full-width at half-maximum of about 0.09°. Hall-effect measurements revealed initial p-type conductivities, but these were unstable and toggled between p-type and n-type over time with Hall concentrations that varied between 2.05 × 10¹³ cm^?3 and 2.89 × 10¹⁵ cm^?3. The fluctuation in the carrier type could be due to lateral inhomogeneity in the hole concentration caused by stacking faults in the films. An additional cause could be the small Hall voltages in the measurements, which could be significantly impacted by even small spikes in signal noise inherent in the measurements.