Renewable hydrogen generation by steam reforming of glycerol over zirconia promoted ceria supported catalyst

The study focuses on hydrogen production from steam reforming of glycerol over nickel based catalyst promoted by zirconia and supported over ceria. Catalyst was prepared by the wet-impregnation method and characterized by BET surface area analysis, X-ray diffraction technique and scanning electron microscopy (SEM) analysis. The performance of the catalyst was evaluated in terms of hydrogen yield, selectivity and glycerol conversion at 700 °C in a tubular fixed bed reactor. The effect of glycerol concentration in feed, space time (W/F_AO), temperature and time on stream (TOS) was analyzed for the catalyst Ni–ZrO₂/CeO₂ which showed the complete conversion of glycerol and high H₂ yield that corresponds to 3.95 mol of H₂ out of 7 mol. Thermodynamic analysis was also carried out using Aspen HYSYS for system having glycerol concentration 10 wt% and 20 wt% and experimental results were compared with thermodynamics. Kinetic study was carried out for the steam reforming of glycerol over Ni–ZrO₂/CeO₂ catalyst using the power law model. The values of activation energy and order of reaction were found to be 43.4 kJ/mol and 0.3 respectively.     

配给能源采集供电:无线传感器节点的功率约束

让周遭的系统能够自动感测环境变化并做出反应，势必将对于人类的生活造成重大改变。无线传感器网络是多个分布式传感器实作（节点）组成的系统，能够共同透过相互无线通信的方式响应实体变化。本文将重点介绍节点的最新进展，并推广对于系统层级设计方法的需求。     

Reconceptualising territoriality and spatial planning: insights from the sea

The concept of territoriality and its relationship to the focus and substance of spatial planning is the subject of much interest at the present time and this paper seeks to contribute to the debate by stepping into the sea. The first part of the paper establishes a framework for considering the spatial planning implications of changing conceptions of territoriality, outlining key sources of territorial innovation and their implications in terms of the development of new units and styles of governance, new challenges for planning practice, and the potential for feedback informing the development of planning theory. The application of the framework is then illustrated in the second part of the paper with reference to the emerging field of maritime spatial planning and in particular to the pioneering work that is being undertaken in Europe. This work is testing established notions of territoriality by highlighting the strong and growing connections between the land and the sea. Here some of the key implications for future spatial planning practice are identified. These indicate that there is a growing recognition of the need for innovation in the territorial units of governance in maritime regions and in the themes, processes and methods of spatial planning in these areas. The paper concludes with some observations on the implications of these findings for the theory of spatial planning.     

Impact of module design on the performance of membrane bioreactors treating municipal wastewater

Membranes are located in a membrane module that physically seals and isolates the feed stream from the permeate flux in membrane bioreactors (MBRs). Therefore, module type, structure, and geometrical configuration are critical design considerations affecting membrane performance in MBRs. In this study, impact of membrane module design on treatment and filtration performance of MBRs was investigated. For this purpose, two flat sheet membrane modules with different outlet structures and module geometries, including rectangular- and D-shaped, were tested. In addition to the differences in outlet structure and module geometry, size of circular structures which supported membranes in rectangular- and D-shaped modules differed from each other. Considering the results, permeate quality was not affected from the change in the module design. However, the most remarkable impact of the module design was observed on the transmembrane pressure (TMP) evolution and fouling potential. D-shaped membrane module including smaller circular structures resulted in a decrease in fouling potential and thus, this module could be operated longer time in comparison to rectangular-shaped membrane module without a severe TMP increase. The observed differences in TMP increase and fouling potential lead to the hypothesis that module design is a critical factor affecting filtration performance in MBRs.     

Structural and Physicochemical Properties of a Polymerizable Surfactant Synthesized from <Emphasis Type="Italic">N</Emphasis>-Methylol Acrylamide

A new polymerizable nonionic surfactant with reactive vinyl groups has been synthesized from N‐methylol acrylamide using a two‐step procedure. The structure of the surfactant molecule was characterized by Fourier transform infrared, ¹H nuclear magnetic resonance and mass spectroscopy. The surface active properties alongside its self‐assembly properties were investigated by surface tension, electrical conductivity, and fluorescence spectroscopy measurements. As compared with other nonionic surfactants, this study showed that this polymerizable surfactant possesses slightly a higher critical micelle concentration (CMC) value and the surface tension value at CMC. The obtained CMC values were compatible among measurements, ca. 0.02–0.038 M. The evidence of micelle formation also provided by the zeta potential measurements and the obtained zeta potential values showed that the polymerizable surfactant solutions had limited stability. The hydrolysis stability and solubility of the polymerizable surfactant were also investigated. The solubility results have shown that it was soluble in polar solvents while insoluble in nonpolar solvents both at room temperature and 40 °C. The acidic and basic hydrolysis of the surfactant increased as the temperature increased and the hydrolysis stability was 180 min (basic medium) and 55 min (acidic medium) at 80 °C.     

Facilitating GL13K Peptide Grafting on Polyetheretherketone via 1-Ethyl-3-(3-dimethylaminopropyl)carbodiimide: Surface Properties and Antibacterial Activity

In the present work, the antimicrobial peptide (AMP) of GL13K was successfully coated onto a polyetheretherketone (PEEK) substrate to investigate its antibacterial activities against Staphylococcus aureus (S. aureus) bacteria. To improve the coating efficiency, 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) was mixed with a GL13K solution and coated on the PEEK surface for comparison. Both energy-dispersive X-ray spectroscopy (EDX) and X-ray photoelectron spectroscopy (XPS) data confirmed 30% greater peptide coating on PEEK/GL13K-EDC than PEEK without EDC treatment. The GL13K graft levels are depicted in the micrograms per square centimeter range. The PEEK/GL13K-EDC sample showed a smoother and lower roughness (Rq of 0.530 µm) than the PEEK/GL13K (0.634 µm) and PEEK (0.697 µm) samples. The surface of the PEEK/GL13K-EDC was more hydrophilic (with a water contact angle of 24°) than the PEEK/GL13K (40°) and pure PEEK (89°) samples. The pure PEEK disc did not exhibit any inhibition zone against S. aureus. After peptide coating, the samples demonstrated significant zones of inhibition: 28 mm and 25 mm for the PEEK/GL13K-EDC and PEEK/GL13K samples, respectively. The bacteria-challenged PEEK sample showed numerous bacteria clusters, whereas PEEK/GL13K contained a little bacteria and PEEK/GL13K-EDC had no bacterial attachment. The results confirm that the GL13K peptide coating was able to induce antibacterial and biofilm-inhibitory effects. To the best of our knowledge, this is the first report of successful GL13K peptide grafting on a PEEK substrate via EDC coupling. The present work illustrates a facile and promising coating technique for a polymeric surface to provide bactericidal activity and biofilm resistance to medical implantable devices.     

Assessing support alternatives for longwall gateroads subject to changing stress

Longwall gateroad entries are subject to changing horizontal and vertical stress induced by redistribution of loads around the extracted panel. The stress changes can result in significant deformation of the entries that may include roof sag, rib dilation, and floor heave. Mine operators install different types of supports to control the ground response and maintain safe access and ventilation of the longwall face. This paper describes recent research aimed at quantifying the effect of longwall-induced stress changes on ground stability and using the information to assess support alternatives. The research included monitoring of ground and support interaction at several operating longwall mines in the U.S., analysis and calibration of numerical models that adequately represent the bedded rock mass, and observation of the support systems and their response to changes in stress. The models were then used to investigate the impact of geology and stress conditions on ground deformation and support response for various depths of cover and geologic scenarios. The research results were summarized in two regression equations that can be used to estimate the likely roof deformation and height of roof yield due to longwall-induced stress changes. This information is then used to assess the ability of support systems to maintain the stability of the roof. The application of the method is demonstrated with a retrospective analysis of the support performance at an operating longwall mine that experienced a headgate roof fall. The method is shown to produce realistic estimates of gateroad entry stability and support performance, allowing alternative support systems to be assessed during the design and planning stage of longwall operations.     

Investigation of the Sharkskin melt instability using optical Fourier analysis

An optical method allowing the characterization of melt flow instabilities typically occurring during an extrusion process of polymers and polymer compounds is presented. It is based on a camera-acquired image of the extruded compound with a reference length scale. Application of image processing and transformation of the calibrated image to the frequency domain yields the magnitude spectrum of the instability. The effectiveness of the before mentioned approach is shown on Styrene-butadiene rubber (SBR) compounds, covering a wide range of silica filler content, extruded through a Göttfert capillary rheometer. The results of the image-based analysis are compared with the results from the sharkskin option, a series of highly sensitive pressure transducers installed inside the rheometer. A simplified version of the code used to produce the optical analysis results is included as supplementary material. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48806.     

Polybrominated diphenyl ethers in the sediments of the Great Lakes. 3. Lakes Ontario and Erie

Sediment cores were taken in 2002 in Lakes Ontario and Erie at four locations. A total of 48 sediment samples were characterized, dated using 210Pb, and analyzed for 10 congeners of polybrominated diphenyl ethers (PBDEs) including BDE209 as well as 39 congeners of polychlorinated biphenyls (PCBs). The surficial concentrations of nine tri- through hepta-BDE congeners (sigma9PBDE) are 4.85 and 6.33 ng g(-1), at sampling sites ON40 and ON30 in Lake Ontario, and 1.83 and 1.95 ng g(-1) at ER37 and ER09 in Lake Erie, respectively, based on dry sediment weight. The surficial BDE209 concentrations are 242 and 211 ng g(-1) at ON40 and ON30 and 50 and 55 ng g(-1) at ER37 and ER09. The sigma(9-) PBDEs fluxes to the sediment around 2002 are 147 and 195 pg cm(-2) year(-1) at ON40 and ON30 and 136 and 314 pg cm(-2) year(-1) at ER37 and ER09, respectively. The fluxes of BDE209 are 6.5 and 7.3 ng cm(-2) year(-1) at ON30 and ON40 and 3.7 and 8.9 ng cm(-2) year(-1) at ER37 and ER09, respectively. Dramatic increases in PBDE concentrations and fluxes upward toward the sediment surface and the present time are evident at both locations in Lake Ontario, while PCBs concentrations peak in the middle of sediment cores around the dated time of 1970s and 1960s. For both locations of Lake Erie, the increasing trends of both PBDEs and PCBs from the bottom to the surficial segments were distorted by sediment mixing. BDE209 is the most abundant congener among PBDEs in the sediments, constituting about 96 and 91% of the total PBDEs on mass basis in Lakes Ontario and Erie, respectively.