A dense and compact laser cladding layer with solid metallurgical bonding significantly improved corrosion resistance of Mg alloy for engineering applications

Although Mg alloy attracts great attention for engineering applications because of high specific strength and low density, low corrosion resistance limits its extensive use. In this study, Mg–Al–Zn–Mn alloy was treated via a laser cladding process to generate a dense and compact laser cladding layer with solid metallurgical bonding on the substrate for improving corrosion resistance, effectively hindering the corrosion pervasion into Mg alloy. The corrosion current density declined from 103 μA/cm² for Mg alloy to 13 μA/cm² for the laser cladding layer in NaCl aqueous solution. Moreover, the laser cladding layer was slightly corroded in comparison with Mg alloy in NaCl aqueous solution. Besides, the microhardness of the cladding layer reached a mean value of 170.5 HV, 3.1 times of Mg alloy (56.8 HV) due to the in situ formation of hardening intermetallic phases. Wear resistance of laser cladding layer was also obviously improved. These results demonstrated that the laser cladding layer obviously enhanced anticorrosion property of Mg alloy for engineering applications.     

浅谈大断面巷道掘进技术的实践与体会

该文针对当前矿井炮掘巷道大断面掘进普遍存在掘进施工较慢的实际,结合公司实际情况,有针对性地提出了解决的办法。     

人员行为对住宅建筑热负荷需求的影响研究

本文对西安市某居民住宅楼不同人员的作息规律和用能行为进行了调研测试,利用马尔可夫链模型和事件机制模拟了不同人员的在室情况,结合DeST软件对考虑人员在室情况和人员行为影响后的住宅建筑热负荷需求进行了模拟,并与传统负荷计算方法下得到的建筑热负荷需求进行比较.结果表明,人员行为对住宅建筑热负荷需求的影响较大,考虑人员行为影响因素后建筑的热负荷需求呈现显著地波动变化且供暖季近92％的时刻建筑的负荷率均不超过60％,上述结果可为供暖系统的设计和运行管理提供指导.     

An inventory analysis of rural pollution loads in China.

Rural pollution has attracted increasing attention over the past decade for its important consequences on surface and groundwater quality. This is particularly so in China due to the wide and effective control of industrial and municipal wastewater discharges over the past decade. Based on the discussion of rural activities in China, this paper develops a new method of inventory analysis through the definition of elementary unit (EU). This inventory analysis approach is then applied to estimate the total rural pollution loads of COD, TN and TP, as well as their spatial distributions in China. Further analysis is also conducted to investigate the correlations between rural pollution loads and agricultural production outputs, as well as population. It is found that China's agriculture is developing largely at the cost of environment quality, and a high population, as well as the increasing demand for agricultural products, is one of the dominant driving forces. The constructed EKC, which describes the relationship between rural pollution loads and agricultural income, also reveals that current agricultural development in China is mostly far from de-locked from the environmental problem.     

Performance study of iSCSI-based storage subsystems

iISCSI is emerging as an end-to-end protocol for transporting storage I/O block data over IP networks. By exploiting the ubiquitous Internet infrastructure, iSCSI greatly facilitates remote storage, remote backup, and data mirroring. This article evaluates the performance of two typical iSCSI storage subsystems by measuring and analyzing block-level I/O access performance and file-level access performance. In the file-level performance study, we compare file access performance in an NAS scheme with that in an iSCSI-based SAN scheme. Our test results show that Gigabit Ethernet-based iSCSI can reach very high bandwidth, close to that of a direct FC disk access in block I/O access. However, when the iSCSI traverses through longer distance, throughput relies heavily on the available bandwidth between the initiator and the target. On the other hand, the file-level performance shows that iSCSI-based file access (SAN scheme) provides higher performance than using NFS protocol in Linux and SMB protocol in Windows (NAS scheme). However, the advantage of using iSCSI-based file accesses decreases as the file size increases. The obtained experimental results shed some light on the performance of applications based on iSCSI storage.     

Experimental and modeling approaches of MR behaviors under large step strains

Rheological properties of MR fluids under large step strain shear are presented in this paper. The experiments were carried out using a rheometer with parallel-plate geometry. Under the large step strain shear, MR fluids behave as nonlinear viscoelastic properties, where the stress relaxation modulus, G(t, γ), shows a decreasing trend with step strain. The experimental results indicate that G(t, γ) obeys time-strain separability. Thus, a mathematical form based on finite exponential serials is proposed to predict MR behavior. In this model, G(t, γ) is represented as the product of a linear stress relaxation, G(t), and the damping function, h(γ), i.e. G(t, γ)=G(t) h(γ). G(t) is simply represented as a three-parameter exponential serial and h(γ) has a sigmoidal form with two parameters. The parameters are identified by adopting an efficient optimization method proposed by Stango et al. The comparison between the experimental results and the model-predicted values indicates that this mathematical model can accurately predict MR behavior.     

基于对比折射法的三维静校正技术及其应用

在地形起伏剧烈、速度和厚度横向变化大的地区，折射静校正技术的应用受到诸多限制，主要表现在不能准确地识别和拾取来自于地下连续地质界面的折射波，使得精确求取的长波长静校正量困难。为此，提出了一种基于对比折射法的三维静校正技术。介绍了这种静校正技术的方法原理和特点，基于对比折射法的折射波至拾取实质上是一个折射层的对比分析解释过程，因此能准确地拾取折射波至，精确地求解低速带的绝对延迟时；然后利用延迟时和近地表速度模型（等效，时深，空变）反演表层模型，最终一次性完成基准面静校正（包含低速带校正和高程校正）。在黄土塬、沙漠以及沙漠和山地的接合部等地区，利用基于对比折射法的三维静校正技术进行静校正处理，使资料的品质得到了明显改善，反射同相轴连续性好，信噪比和分辨率高，构造形态清晰可靠，提高了勘探精度。     

柯克亚油气田混合来源天然气的地球化学特征

柯克亚油气田是我国开发比较早的一个油气田,但由于受混源和其他因素的影响,对气源的认识众说纷纭。通过对天然气的地球化学特征的分析,并参照国内外关于甲烷、乙烷、丙烷碳同位素关系方面的资料,提出了如下看法:柯克亚天然气碳同位素相对较重,与塔里木盆地下古生界海相天然气的碳同位素组成区别较大;根据天然气40Ar/36Ar组成,柯克亚油气田的气源不是单一来源;柯克亚油气田绝大多数天然气的甲烷和乙烷碳同位素值关系符合Faber推断的 型有机质方程直线关系,说明有机质属于较好的有机质类型,或者是由原油裂解形成的天然气;除了K2井和K18井天然气成熟度较低以外,绝大多数天然气的成熟度大约在1.8%～2.2%之间,属于高过成熟气,但也混有一些成熟度在0.9%～1.2%的源岩形成的天然气;推测天然气主要来源于石炭系―二叠系源岩,而混有成熟度低的源岩形成的天然气则有可能来自侏罗系源岩。     

经有机交联剂活化的低相对分子质量聚合物在墨西哥湾南部水波及矿场的应用

墨西哥南部地区面临的挑战之一是水管理.油流中的水增加了其处理费用,导致结垢,降低了采油量,最终关井(与修井费用有关).甚至当产层中仍然含有大量可采油气时,也常常将这些层废弃以避免产水.虽然天然裂缝对油流有积极的作用,但它们也促进了由锥进效应或油气产层和其上或下层段之间的高渗透薄夹层引起的水或气的流动.如果这些油层产水,就会很快影响其生产能力.另一个必须解决的问题是:边水通过断层、天然裂缝等流动引起的早期水突破.本文将讨论墨西哥南部使用经有机交联剂活化的低相对分子质量聚合物的实例,介绍候选对象的选择过程、总体作业设计、实验室试验结果等,以及在这一地区进行的降低产水量处理.实例中包括衰竭、高度裂缝性油藏.     

低渗低温低压水敏性储气层压裂改造技术研究与应用

低渗低温低压水敏性储气层因压裂液快速破胶困难、黏土膨胀水敏伤害严重和压后压裂液返排动力不足等因素，使得压裂增产面临诸多难题。针对上述难题进行了技术攻关，形成了弱交联、低温活化剂与超量破胶剂的低温储层快速破胶技术、有机盐与无机盐双元体系复合防膨技术以及高比例液氮全程助排的排液技术。该压裂增产改造技术使牛101井头屯河组首次获得工业油气流，扩展了三塘湖盆地勘探空间。