燕化660 kt/a乙烯冷区设备布置

主要介绍了大型乙烯改扩建的冷区设备布置的主要特点，分析了设备布置的思路，及与土建等各专业的关系，强调了设备布置方案利旧的方法。     

Measurement and Correlation for Solubility of (S)-(+)-2,2-Dimethyl-cyclopropane Carbox Amide in Different Solvents

1 INTRODUCTION (S)-(+)-2,2-dimethylcyclopropane carbox amide [(+)-DMCPCA, Fig.1] is a key intermediate of Cilas- tatin, an inhibitor of dehydropeptidase-I. As the syner- gist of imipenem (an antibiotic drug), cilastatin is widely used in clinical applications and has prosper- ous prospects[1]. In industrial manufacture[2―6], as the optical intermediate, the chemical and optical purity of (+)-DMCPCA would affect the quality of cilastatin. So, the separation and purification are impo…     

An Investigation of Error Sources in Computational Fluid Dynamics Modelling of a Co-current Spray Dryer

The paper is focused on identifying error sources in computational fluid dynamics(CFD) predictions of a spray drying process. Seven groups of drying and atomisation parameters were selected for analysis and 13 simulation trials were performed. The theoretical results were compared with experimental data and sensitivity of the simulation results to the analysed factors was determined. The following parameters affecting the accuracy of CFD spray modelling were found: gas turbulence model, particle dispersion, atomising air, initial parameters of atomisation and heat losses to the environment. A major difference in the errors committed during modelling of spray drying process for fine and coarse sprays was observed.     

以设计为中心的虚拟制造技术及在化工过程装备中的应用

简述了虚拟制造技术的内涵、关键技术及应用现状。在分析化工过程装备特点基础上 ,对过程装备虚拟制造技术平台的体系结构进行了探讨 ,以典型过程装备螺旋片导流式气液分离器为例 ,对其数字化建模方法、数值仿真技术、虚拟设计和制造环境进行了研究。初步结果表明 :以设计为中心的虚拟制造技术的应用 ,可以有效地减少产品开发的时间和成本 ,提高产品质量     

Study on Jet Coflow Packing Tray

Experimental study on hydrodynamics and mass transfer efficiency of jet coflow packing tray (JCPT) was conducted in a φ285 mm column and a φ200 mm column, respectively. Compared with new vertical sieve tray which has been applied in the petrochemical industry since 1968, the JCPT has lower pressure drop, higher capacity and higher mass transfer efficiency, and seems promising in commercial application.     

强化单螺杆挤出机内层流混合的方法

综述了单螺杆挤出机内聚合物熔体层流混合机理的研究进展，对提高混合的措施进行了分析总结，指出了进一步强化混合效果的方法。     

有机化合物及聚合物的计算机辅助红外光谱法鉴定

建立了计算机辅助红外光谱法鉴定有机化合物及聚合物的新方法,介绍了计算有机化合物和聚合物的一些经验公式。程序设计首先收集、整理常用聚合物、有机添加剂和有机小分子的红外光谱数据,然后提取反映该物质特征的吸收峰数据,制作ACCESS数据库,利用VisualBasicDAO数据链接方式,根据查询要求动态链接数据库,利用要求查询的聚合物特性,经过经验公式的算法翻译,生成SQL查询语句进行查询。     

炭黑对复合型导电高分子材料电性能影响

阐述了炭黑填充型导电高分子复合材料的导电机理，讨论了炭黑基本物性、填充量以及分散状态对材料导电性的影响，并探讨了影响炭黑分散状态的因素。     

局部应力分析中两个问题的讨论

容器上的局部结构承受外加载荷时，需要对该局部结构的强度进行评定。本文通过分析后指出，针对局部应力评定的强度条件应根据载荷的种类和性质确定。另外，本文通过实例说明，当进行管系应力分析，从而确定接管施加于容器上的载荷时，接管与容器连接处的柔度对该处载荷值和管道中的最大弯矩值都会有很大影响，在设计中考虑该柔度对设计的安全性和经济性都是有意义的。     

构树皮丙酮抽出物的DEAE—Sephadex分离及GC—MS分析

利用ＤＥＡＥ—Ｓｅｐｈａｄｅｘ分离柱及ＧＣ—ＭＳ对构树皮丙酮抽出物 进行了分离和分析．在丙酮抽出物中中性组分占抽出物的５９．７％，弱酸性 组分和强酸性组分分别占２５．９％和１０．３％．中性组分中不皂化物占 ８９．２％，皂化物仅占８．４％．不皂化物的成分比较复杂，所检出的主要有 甾醇和甾酮类．皂化物中亚油酸占５０％，软脂酸占２１％．弱酸性组分中 ５０％以上是脂肪酸（亚油酸和软脂酸），而没有松香酸．