Processing and electromechanical properties of high-coercive field ZnO-doped PIN-PZN-PT ceramics

This study explores sintering and piezoelectricity of ZnO-doped perovskite Pb(In_1/2Nb_1/2)O₃-Pb(Zn_1/3Nb_2/3)O₃-PbTiO₃ (PIN-PZN-PT) ceramics. The enhanced densification of ZnO-doped PIN-PZN-PT is attributed to the formation of oxygen vacancies by the incorporation of Zn²⁺ into the perovskite B-site and increased rate of bulk diffusion relative to undoped PIN-PZN-PT. Incorporation of Zn²⁺ into the perovskite lattice increased the tetragonal character of PIN-PZN-PT as demonstrated by tetragonal peak splitting and increased Curie temperature. Sintering in flowing oxygen reduced the solubility of Zn²⁺ in the perovskite lattice and resulted in rhombohedral PIN-PZN-PT. Sintering in oxygen prevented secondary phase formation which resulted in a high-piezoelectric coefficient (d₃₃ – 550 pC/N), high-coercive field (E_c – 13 kV/cm), and high-rhombohedral to tetragonal phase transition temperature (T_r-t – 165°C). We conclude that ZnO-doped PIN-PZN-PT ceramics are excellent candidates for high-power transducer applications.     

Identification of a new oxidation/ dissolution mechanism for boria-accelerated SiC oxidation

Boria effects on accelerated SiC oxidation kinetics were investigated by conducting thermogravimetric analysis on SiC substrates coated with sol-gel derived borosilicate glass isothermally exposed to dry O₂ and argon at 800°C and 1200°C for 100 hours. Boria concentrations in the glass coatings were 0, 14-38, and 92-94 mol%, balance silica. Accelerated weight gain was observed for SiC exposures in dry O₂ at 800°C when boria concentrations were ≥ 92 mol%, corroborated by oxide thickness ranging from 3.5 to 10 µm. The oxide thickness predicted for pure SiC exposed to these conditions in the absence of boria is 0.15 µm. Microstructural analysis of SiC surfaces after oxide removal revealed that boria etched the underlying SiC substrate. Oxidation exposures at 1200°C in dry O₂ suppressed boria effects on accelerating SiC oxidation kinetics due to rapid boria volatilization coupled with the formation of a protective thermally grown silica scale. Accelerated weight gain or oxide growth did not occur with argon exposures at either temperature. A new mechanism for boria-accelerated SiC surface-reaction kinetics is presented based on evidence for boria etching of SiC.     

Human Cellular Retinol Binding Protein II Forms a Domain-Swapped Trimer Representing a Novel Fold and a New Template for Protein Engineering

Domain-swapping is a mechanism for evolving new protein structure from extant scaffolds, and has been an efficient protein-engineering strategy for tailoring functional diversity. However, domain swapping can only be exploited if it can be controlled, especially in cases where various folds can coexist. Herein, we describe the structure of a domain-swapped trimer of the iLBP family member hCRBPII, and suggest a mechanism for domain-swapped trimerization. It is further shown that domain-swapped trimerization can be favored by strategic installation of a disulfide bond, thus demonstrating a strategy for fold control. We further show the domain-swapped trimer to be a useful protein design template by installing a high-affinity metal binding site through the introduction of a single mutation, taking advantage of its threefold symmetry. Together, these studies show how nature can promote oligomerization, stabilize a specific oligomer, and generate new function with minimal changes to the protein sequence.     

Influence of carboxymethylation on the gelling capacity,rheological properties,and antioxidant activity of feruloylated arabinoxylans from different sources

Feruloylated arabinoxylans (FAX) are gelling polysaccharides presenting antioxidant activity (AC) and potential application as delivery systems. The influence of carboxymethylation on the gelling capacity, rheological properties, and AC of FAX from wheat flour (FAX1) and maize distillers grains (FAX2) was analyzed. The degree of substitution of carboxymethyl groups was 0.27 and 1.77 for carboxymethylated FAX1 (CFAX1) and FAX2 (CFAX2), which presented a change in M _n from 446 to 362 kDa and from 120 to 180 kDa, and a loss in FA content from 1.05 to traces and from 10.13 to 0.12, respectively, after carboxymethylation. G′ value at the end of rheological tests for FAX1 (71 Pa) and FAX2 (726 Pa) was higher than the corresponding G″ value. In contrast, G″ value for CFAX1 (0.35 Pa) and CFAX2 (0.03 Pa) was higher than the respective G′ value, indicating that they do no form gels. The AC increased in CFAX1 in relation to FAX1 from 4.49 to 8.30 mmol Trolox equivalent antioxidant capacity (TEAC) kg⁻¹, respectively, while it decreased in CFAX2 with regard to FAX2 from 11.31 to 9.43 mmol TEAC kg⁻¹, respectively. Carboxymethylation could be a path to design FAX derivatives offering alternative potential applications. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48325.     

Preparation and characterization of blends of high density polyethylene and poly(ethylene‐co‐1‐octene) elastomer

Mechanical, thermal, and morphological properties of blends of high density polyethylene and poly(ethylene‐co‐1‐octene) (PEO) were evaluated. The blends were prepared in a single screw extruder at 230°C and 50 rpm with volume fraction of elastomer varying in the range from 0.05 to 0.8. Factors such as chemical similarity and melt viscosity favor the interdiffusion process of phases, resulting in better interfacial adhesion. A synergistic effect on the strength at break and elongation at break for a particular range of blend composition was observed. Blends with a volume fraction of PEO higher than 5% presented a super tough behavior at room temperature. Thermal analysis showed that there is a certain degree of interaction between high density polyethylene and PEO. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 1991–1995, 2001     

Determination of Retained B2O3 Content in ZrB2‐30 vol% SiC Oxide Scales

The composition of the borosilicate glass layer formed during oxidation of ZrB₂‐30 vol% SiC was determined to elucidate the extent of B₂O₃ retention in the oxide during high‐temperature oxidation. Oxidation was conducted in stagnant air at 1300°C, 1400°C, and 1500°C for times between 100 and 221 min. Specimens were characterized using mass change and scanning electron microscopy. After oxidation, the borosilicate glass layer was dissolved from the specimens sequentially with deionized H₂O and HF acid, to analyze the glass composition using inductively coupled plasma optical emission spectrometry. It was found that the average B₂O₃ content in the glass scale ranged from 23 to 47 mol%. Retained B₂O₃ content in the bulk of the glass decreased with increasing temperature, confirming increased volatility with temperature. Boron depth profiles were also obtained in the near surface region using X‐ray photoelectron spectroscopy and energy dispersive spectroscopy. The measured B concentrations were used to estimate the B₂O₃ concentration profile and B diffusion coefficients in the borosilicate glass. Implications for the ZrB₂‐SiC oxidation process are discussed.     

Application of Powers’ model to modern portland and portland limestone cement pastes

Powers’ model is a simple approach for estimating the relative volumes of hydration products, porosity, and chemical shrinkage present in portland cement paste as a function of its starting water‐to‐cement ratio (w/c) and current degree of hydration. It forms an important link between cement composition, microstructure, and performance, necessary for modeling cement‐based systems. Previous researchers have adapted Powers’ model for inert fillers to illustrate their effects on the hydration, porosity, and chemical shrinkage of blended cements; however, it is well‐documented that limestone is not, in fact, an inert filler, but rather participates in cement hydration through both chemical and physical processes. This research experimentally investigates the applicability of Powers’ model to modern portland cements containing up to 15% by mass finely divided limestone. The results demonstrate that the modified Powers’ model is insufficient for predicting the influence of finely divided limestone additions on the chemical shrinkage of both ordinary portland cement pastes and portland limestone cement pastes. Possible explanations for the discrepancy are discussed and a plausible source is proposed.     

Effect of carbodiimide on the bond strength and durability of resin-dentin interface

The effect of 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) on the bond strength and durability of the resin-dentin interface using a three-step etch-and-rinse and a universal adhesive (UA) system was investigated. Additionally, the effect of dry and wet bonding on the interface created by UA was evaluated. Investigations carried out were scanning electron microscopy (SEM) evaluation, interfacial nanoleakage expression (NE) and micro-tensile bond strength (μ-TBS) testing. Dentin surfaces of sound molars were acid-etched, pretreated with 0.3 M EDC followed by adhesive application and restored with composite incrementally. Resin-dentin beams for μ-TBS testing and resin-dentin slabs for SEM and NE were sectioned. At 24 h, pre-treatment with EDC did not significantly change the μ-TBS and NE of any of the adhesives compared to their respective controls. There is a significant decrease in the μ-TBS and significant increase in NE after 1 yr of storage compared to the 24 h results. UA in dry bonding conditions pretreated with EDC had higher μ-TBS values than its control. Pre-treatment of acid-etched dentin with 0.3 M EDC for 1 min enhanced the bond strength and durability of the resin-dentin interface created by the tested adhesives. Application of UA in a wet bonding technique appeared less effective than dry bonding technique.     

Dietary intake of essential and long-chain polyunsaturated fatty acids in pregnancy

The dietary intake of EFA and long-chain PUFA (LCPUFA) by women with (n=14) and without (n=31) gestational diabetes mellitus (GDM) was determined by repeated 24-h recalls. Women with GDM consumed significantly more energy as fat compared with women who had uncomplicated pregnancies; absolute dietary fat did not differ. Dietary n−3 LCPUFA was substantially lower than the current recommendation for pregnancy, whereas intake of saturated FA (SFA) exceeded it. We conclude that replacing dietary sources of SFA with those of EFA and LCPUFA, especially n−3 LCPUFA, would benefit the dietary fat profiles of all pregnant women.