Use of a selective extractant-impregnated resin for removal of Pb(II) ion from waters and wastewaters: Kinetics,equilibrium and thermodynamic study

Adsorption of Pb(II) ion by a novel extractant-impregnated resin, EIR, was studied as a function of various experimental parameters using batch adsorption experiments. The new EIR was prepared by impregnating gallocyanine (GCN) onto Amberlite XAD-16 resin beads. The EIR was characterized by nitrogen analysis and SEM micrographs. The new EIR showed excellent selectivity factor values (α) for Pb(II) adsorption respect to other metal ions. The effects of some chemical and physical variables were evaluated and the optimum conditions were found for Pb(II) removal from aqueous solutions. The equilibrium adsorption isotherm was fitted with the Langmuir adsorption model. The maximum adsorption capacity (q_max) of EIR for Pb(II) ions was found to be 367.92 mg g⁻¹. The kinetic studies showed that the intra-particle diffusion is the rate-controlling step. Also, the intra-particle diffusion coefficients, D_ip values, were of the order of 10⁻¹² m² s⁻¹. The values of enthalpy (ΔH°) were positive, which confirms the endothermic nature of adsorption process. Also, the positive entropy changes (ΔS°) were showed that the randomness increased along with the adsorption process. In addition, the obtained negative values of Gibbs free energy (ΔG°) indicated feasible and spontaneous nature of the adsorption process at different temperatures. The new adsorbent was very stable so that it can be successfully used for many consecutive cycles without significant loss in its adsorption capacity.     

CFD modeling of immiscible liquids turbulent dispersion in Kenics static mixers: Focusing on droplet behavior

The present study is concerned with the computational fluid dynamics(CFD) simulation of turbulent dispersion of immiscible liquids, namely, water–silicone oil and water–benzene through Kenics static mixers using the Eulerian–Eulerian and Eulerian–Lagrangian approaches of the ANSYS Fluent 16.0 software. To study the droplet size distribution(DSD), the Eulerian formulation incorporating a population balance model(PBM) was employed. For the Eulerian–Lagrangian approach, a discrete phase model(DPM) in conjunction with the Eulerian approach for continuous phase simulation was used to predict the residence time distribution(RTD) of droplets.In both approaches, a shear stress transport(SST) k-ω turbulence model was used. For validation purposes, the simulated results were compared with the experimental data and theoretical values for the Fanning friction factor, Sauter mean diameter and the mean residence time. The reliability of the computational model was further assessed by comparing the results with the available empirical correlations for Fanning friction factor and Sauter mean diameter. In addition, the influence of important geometrical and operational parameters, including the number of mixing elements and Weber number, was studied. It was found that the proposed models are capable of predicting the performance of the Kenics static mixer reasonably well.     

Potential Development of Value-Added Fishery Products in Underutilized and Commercial Fish Species: Comparative Study of Lipid Quality Indicators

In this study, proximate and fatty acid composition in the edible flesh of eight underutilized and five commercial freshwater fish species were compared in order to evaluate the potential of these fish for development of functional value-added fishery products. The lipid content (% dry weight basis) of investigated fish species ranged from 3.44 to 9.25 in underutilized and 3.73–7.68 in commercial species. In comparison with underutilized fish species, commercial species had higher levels of protein (P < 0.05). The high proportion of EPA+DHA was found with Goldfish (524 mg/100 g flesh), Wels (422 mg/100 g flesh), and Crucian carp (354 mg/100 g flesh), all of which belonged to underutilized group. All studied fish (save Lenkoran) showed values higher than the minimum recommended DHA/EPA value (0.45). The ratios of n-6/n-3 found in this study were much lower (save Goatfish) than those cited as a harmful value (4.0 as the maximum value). The PUFA/SFA value of the present fish samples was higher at 1.57 for Goatfish, 1.02 for Lenkoran, 0.68 for Wels, all of these fish belonging to the underutilized group. The highest atherogenic and thrombogenicity index values were generally obtained for commercial species. It seems in respect of comparability of these lipid quality indicators, the underutilized fish species could be highly recommended as an important source of polyunsaturated fatty acids and Max-EPA products for humans consumption.     

Magnetic Mixed Hemimicelles Solid-Phase Extraction of Three Food Colorants from Real Samples

Introducing a specific clean extraction procedure with a minimal matrices effect for food colorant determination is still a challengeable topic and highly recommended. Mixed hemimicelle solid-phase extraction method, based on cetyltrimethylammonium bromide-coated Fe₃O₄/SiO₂ nanoparticles as a novel, simple, and fast preconcentration method, was applied for preconcentration and fast isolation of three synthetic food colorants in foodstuff matrices prior to HPLC-UV-vis determination. The influence of different parameters on extraction efficiency such as surfactant amount, sample pH, time of extraction, desorption condition, and nanoparticles concentration was optimized. Under the optimized conditions, a preconcentration factor of 100 was achieved by extracting 10 mL sample. The limit of detection for the three synthetic food colorants including Tartrazine, Sunset yellow FCF, and Quinoline yellow is 2.50, 1.25, and 2.12 μg/L, respectively. The proposed method was applicable for extraction and preconcentration of three food colorants in various food samples with the food dye contents in the range of 13–105 μg/L.     

Elaboration of Al2O3/PTFE icephobic coatings for protecting aluminum surfaces

In order to protect aluminum ground wires and phase conductors of overhead power lines against ice adhesion and excessive accretion, for ensuring safe and reliable power transmission during winter periods, a new coating with icephobic characteristics and satisfactory mechanical properties was developed. The method consisted in depositing an extremely adherent poly(tetrafluoroethylene) or PTFE coating on an Al₂O₃ underlayer produced by anodisation in either a phosphoric or an oxalic acid electrolyte. PTFE impregnation was carried out at low temperature (320 °C) and coating adhesion was assessed using tape and bend tests. These treatments resulted in highly hydrophobic surfaces with water contact angles lying between 130° and 140°. Ice shear stress was reduced by almost 2.5 times, and the PTFE coatings remained active after several ice shedding events. Morphologies and chemical compositions were studied using scanning electron microscopy, energy dispersive X-Ray analysis, as well as Fourier Transform Infra Red and X-Ray photoelectron spectroscopy.     

Dynamic tank in series modeling of direct internal reforming SOFC

A dynamic tank in series reactor model of a direct internally reforming solid oxide fuel cell is presented and validated using experimental data as well as a computational fluid dynamics (CFD) model for the spatial profiles. The effect of the flow distribution pattern at the inlet manifold on the cell performance is studied with this model. The tank in series reactor model provides a reasonable understanding of the spatio‐temporal distribution of the key parameters at a much lesser computational cost when compared to CFD methods. The predicted V–I curves agree well with the experimental data at different inlet flows and temperatures, with a difference of less than ±1.5%. In addition, comparison of the steady‐state results with two‐dimensional contours from a CFD model demonstrates the success of the adopted approach of adjusting the flow distribution pattern at the inlet boundaries of different continuous stirred tank reactor compartments. The spatial variation of the temperature of the PEN structure is captured along with the distributions of the current density and the anode activation over‐potential that strongly related to the temperature as well as the species molar fractions. It is found that, under the influence of the flow distribution pattern and reaction rates, the dynamic responses to step changes in voltage (from 0.819 to 0.84 V), fuel flow (15%) and temperature changes (30 °C), on anode side and on cathode side, highly depend on the spatial locations in the cell. In general, the inlet points attain steady state rapidly compared to other regions. Copyright © 2017 John Wiley & Sons, Ltd.     

Hydrogen from solar energy,a clean energy carrier from a sustainable source of energy

Solar energy is going to play a crucial role in the future energy scenario of the world that conducts interests to solar-to-hydrogen as a means of achieving a clean energy carrier. Hydrogen is a sustainable energy carrier, capable of substituting fossil fuels and decreasing carbon dioxide (CO₂) emission to save the world from global warming. Hydrogen production from ubiquitous sustainable solar energy and an abundantly available water is an environmentally friendly solution for globally increasing energy demands and ensures long-term energy security. Among various solar hydrogen production routes, this study concentrates on solar thermolysis, solar thermal hydrogen via electrolysis, thermochemical water splitting, fossil fuels decarbonization, and photovoltaic-based hydrogen production with special focus on the concentrated photovoltaic (CPV) system. Energy management and thermodynamic analysis of CPV-based hydrogen production as the near-term sustainable option are developed. The capability of three electrolysis systems including alkaline water electrolysis (AWE), polymer electrolyte membrane electrolysis, and solid oxide electrolysis for coupling to solar systems for H₂ production is discussed. Since the cost of solar hydrogen has a very large range because of the various employed technologies, the challenges, pros and cons of the different methods, and the commercialization processes are also noticed. Among three electrolysis technologies considered for postulated solar hydrogen economy, AWE is found the most mature to integrate with the CPV system. Although substantial progresses have been made in solar hydrogen production technologies, the review indicates that these systems require further maturation to emulate the produced grid-based hydrogen.     

LBM investigation of a Cu-water nanofluid over various configurations of pipes in the mixed convection flow

Increasing the heat capacity of heat exchangers is a crucial need for modern devices. The thermal conductivity of the usual fluids and the Nusselt (Nu) number of flows containing such fluids are two bottlenecks in the way of increasing heat delivery in the heat exchangers. For this reason, nanofluids have been introduced. The effect of utilizing a Cu-water nanofluid as a coolant of two hot pipes in a square cavity is investigated numerically with a two-component lattice Boltzmann method. The volume fraction of nanoparticles is assumed to be constant (0.03) while the Richardson (Ri) number varies from 0.02 to 20. Results show that the effectiveness of nanoparticles is better observed in the natural convection mode. However, sedimentation is also very probable at high Ri numbers, which significantly reduces the effectiveness of the nanoparticles. Configurations which produce a natural convection stream similar to the forced convection one as well as the configurations with high spacing and hence, low heat stream interactions, are the best choices for a uniform heat rate from the pipes.     

Effects of yoghurt butter oils on rat plasma lipids,haematology and liver histology parameters in a 150‐day study

Although yoghurt butter oil as a fermented dairy product is widely consumed in several countries, its metabolic effects have not been fully elucidated. In this study, male Wistar rats were treated with standard diet, standard diet enriched with 10% or 20% (W/W) of either cow yoghurt butter oil (CYBO), sheep yoghurt butter oil (SYBO) or cottonseed oil (COT) for 20 weeks. Treatment of rats with CYBO or SYBO (at both concentrations) did not significantly influence haematological parameters, plasma lipids and liver histological structure. However, in contrast to popular belief, COT treatment at the higher dose induced leukocytosis, dyslipidaemia and liver steatosis.     

New exact solutions of the Tzitzéica-type equations in non-linear optics using the expa function method

One specific class of non-linear evolution equations, known as the Tzitzéica-type equations, has received great attention from a group of researchers involved in non-linear science. In this article, new exact solutions of the Tzitzéica-type equations arising in non-linear optics, including the Tzitzéica, Dodd–Bullough–Mikhailov and Tzitzéica–Dodd–Bullough equations, are obtained using the exp_a function method. The integration technique actually suggests a useful and reliable method to extract new exact solutions of a wide range of non-linear evolution equations.