低功耗矢量水声信号采集处理系统设计与实现

为进一步降低矢量水听器信号采集处理系统对水下滑翔机平台的续航影响,设计了一种以 ARM和 DSP 为核心控制 器的低功耗信号采集处理系统。利用ARM 控制器实现系统的多种工作模式,以达到不同状态下的最佳功耗控制。此外,在 控制软件中加入必要的优先级设计和流水线设计,以提高系统硬件控制效率,最后利用功率测试仪对系统不同工作模式进行 测试。结果表明,低功耗模式下平均功耗约为1.27 W, 实时处理模式下平均功耗约为4.29 W。 在长时间连续工作情况下,可 大幅度降低实时处理模式的工作时间占比,功耗控制效果显著,有效证明了该方案的有效性和优越性。     

天基发射与载人登月初探

登月是载人航天向深空探测的延续，它与载人飞船工程相比，可靠性要求更高，工程规模更大，资金投入更多。结合国外登月历程和我国航天事业取得的重大成就，探讨了利用现有运载技术，分批次将登月飞船和航天员送入近地轨道，并在天基发射平台上进行组装发射，实现载人登月的设想；并就天基发射平台和天基发射方式进行了初步探讨。     

Characterization of residual stresses from cold expansion using spatial statistics

Residual stress fields from cold expansion have been widely used to extend the fatigue life of aircraft structures. However, the spatial statistical character of these residual stress fields has not been established and has not been incorporated in current analysis methods. The objective of this study was to establish a spatial statistical method to quantify the residual stress field around a cold expanded hole. A framework called the Spatial Analysis of Residual Stress (SpARS) was developed utilizing spatial correlation, response surface modelling techniques and statistical resampling methods to characterize the residual stress field. Our results showed that tolerance bounds on residual stress can be quantified using this method. We also demonstrated the SpARS method using recently published round robin case studies. The newly developed model will be useful for aircraft structural fatigue crack growth analyses to incorporate residual stress fields for extending inspection intervals for fatigue and fracture critical structures.     

Development of single drive electrode electrical resistance tomography system

A new electrical resistance tomography system has been designed using the single drive electrode method. The bidirectional pulse current is adopted in this system as the exciting current. The model of this new method has been set up in ANSYS and validated by simulation and actual measured data. Based on this model, the influence of medium resistivity and connected resistance as well as the influence of medium distribution on the measured data is studied. The experimental results and the reconstructed images are presented at last to testify to the reliability of the new system and the feasibility of the new method.     

高流动性星型尼龙12的合成与表征

在均苯三甲酸的存在下,进行十二内酰胺的水解聚合,合成了四种不同臂长的三臂星型尼龙12,对产物的分子量进行了测定,并对其力学性能和流变行为进行了研究。结果表明,星型尼龙12的分子量随着均苯三甲酸含量的提高而降低,与相应分子量的线型尼龙12相比,星型尼龙12的拉伸强度和弯曲强度基本保持,冲击强度保持率在80%以上,断裂伸长...     

沙柳/聚乙烯醇新型水凝胶复合膜的制备及性能研究

采用湿法纺丝合成新型沙柳木粉(SPP)/聚乙烯醇(PVA)水凝胶复合膜(SPPM)。研究凝固浴时间、硫酸浓度对SPPM吸附Hg²⁺吸附量与力学性能的影响。采用扫描电镜(SEM)、比表面积和平均孔径、红外光谱(FT-IR)和X射线衍射(XRD)等手段分析SPPM的结构和吸附机理;采用热重(TG)对SPPM的热性能进行分析。结果表明:凝固浴时间为1h, H₂SO₄浓度为7%时最佳,吸附量为421mg/g。SPPM具有较好的孔道结构,吸附性能良好且可重复利用5次以上,并具有较大的比表面积以及良好的热稳定性。SPPM的Hg²⁺吸附过程符合伪二级动力学模型和Freundlich等温线模型。