浅谈出口巴基斯坦铁路客车新型酚醛玻璃钢风道的研制开发

本文阐述了新型酚醛玻璃钢风道的成型工艺、开发过程，并与传统玻璃钢风道作了比较，论述了新型酚醛玻璃钢风道的优点，并对其应用前景和对铁路客车的设计思路的影响进行了探讨。     

降低玻璃钢产品的收缩及变形的实验研究

本文介绍了如何通过控制原材料的选用、玻璃钢产品的成型工艺、加入填料、模具结构设计来最大限度的减少铁路客车用玻璃钢(FRP)产品的收缩及变形。     

丝状真菌纤维素酶合成机制的研究

丝状真菌产生的纤维素酶被认为是最有应用前景的,但就目前酶生产效率来看,离实际应用还有很大的差距,需要对酶的合成调节机制有更为全面和深刻的了解。纤维素酶的生物合成受诱导和阻遏双重控制,酶的生产既有赖于低廉的保持一定浓度诱导物的存在,又必须清除分解代谢产物对酶合成的阻遏,其中的详细机制有待进一步的阐明。真菌纤维素酶的分泌也是相当复杂的,在酶的分泌过程中,酶会发生例如糖基化等一系列变化。提高纤维素酶的活力测定方法的准确性,使其进一步规范化,是研究纤维素酶工作的另外一个重要的领域。随着现代生物学朝着分子水平的不断发展,分子生物学的许多方法也越来越多地被应用于纤维素酶的研究中,并取得了重要进展。对真菌纤维素酶合成调节机制的深入研究,将为提高纤维素酶产量,推动应用工作的发展打下理论基础。     

煤焦油加工技术的探讨

煤焦油曾为近代有机化工作出了历史性贡献。我国煤焦油资源丰富,但尚未得到有效和合理利用。根据高温煤焦油的组成特点,对煤焦油的初馏、沥青加工利用和煤焦油产品的深加工技术进行了探讨,提出一些建议。此外还讨论了煤焦油加工企业的发展模式。     

Effect of cobalt oxide on surface structure of alumina supported molybdena catalysts studied by in situ Raman spectroscopy

A set of Co promoted 10% Mo/Al₂O₃ samples have been characterized by means of Raman spectroscopy under ambient as well as in situ dehydrated conditions. Under ambient conditions, the degree of the polymerization of surface molybdenum oxide species decreases with increasing Co loading. Under dehydrated conditions, the polymeric molybdenum oxide species is absent with the addition of only 0.2% Co. At low Co loadings (2%), before the formation of CoMoO₄ compound, the spectral features are very similar under ambient conditions. Dehydration causes the upward shift of the Mo=O symmetric stretching mode. A broad band around 920–930 cm^–1 was thus observed. This band has been suggested to be associated with the Co-Mo interaction species. In contrast to crystalline CoMoO₄, this species shows a reversibility on H₂ reduction-O₂ reoxidation treatments. From the results obtained, it is proposed that cobalt oxide interacts with the most polymerized molybdenum oxide species to form Co-Mo interaction species and/or crystalline CoMoO₄; therefore, the amount of the surface molybdenum oxide species decreases with a change in the molecular structure as a function of the Co concentration.     

Catalytic activities and properties of mesoporous sulfated Al2O3–ZrO2

Mesoporous sulfated Al₂O₃–ZrO₂ (MSAZ) catalysts with large surface areas and pore volumes after calcination at high temperature (650 °C) and with higher Al₂O₃ content than 20wt% were successfully prepared from a template of block copolymer (P84). The MSAZ catalysts were characterized by X-ray diffraction (XRD), N₂ adsorption, transmission electron microscopy (TEM), ²⁷Al magic-angle spinning nuclear magnetic resonance (MAS NMR), thermogravimetric analysis (TG–DTG), temperature-programmed desorption of ammonia (NH₃-TPD) and infrared spectra (IR) of adsorbed pyridine. It is shown that the resulting mesostructured sulfated Al₂O₃–ZrO₂ samples have a well-developed textural mesoporosity. The number of acid sites present on MSAZ catalysts is higher than that on conventional sulfated zirconia, and the former catalysts are more active than the latter one for various acid-catalyzed reactions.     

Kinetics of epoxy resins formation from bisphenol-A,bisphenol-S,and epichlorohydrin

The kinetics of formation of epoxy resins derived from bisphenol-A, bisphenol-S, and epichlorohydrin under stoichiometric conditions was considered. The kinetics of reaction was studied by taking into account the consumption of the added alkali and epoxide value of epoxide oligomers. The obtained results satisfactorily explained that the reactivity of bisphenol-A with epichlorohydrin is higher than that of bisphenol-S, the rate of dehydrochlorination of chlorohydrin ether in the presence of alkali and water is much higher than that of the rate of condensation of phenolic hydroxyl group with epichlorohydrin. The apparent reaction order of phenolic groups with epichlorohydrin and terminal epoxide group in the oligomer are all second order. The rate constants and activation energy were determined. The results are discussed. © 1993 John Wiley & Sons, Inc.     

Preparation and Photoluminescence of Partially Filled ZnO Microtubes Using Block Copolymers

Partially filled ZnO microtubes were synthesized in large scale using block copolymers. The growth mechanism of this unique construction is proposed on the basis of adsorption of block copolymers on {0002} plane of wurtzite ZnO. The photoluminescence property of these unique ZnO microtubes is also studied using a Xe lamp as the excitation source at room temperature. Blue emission band at 425 nm is a much stronger ultraviolet emission band, which is due to laminar structure of ZnO microtubes.     

累托石矿物提纯工艺探讨

以B03作分散剂,对湖北省钟祥县杨榨累托石粘土矿物进行了机械搅拌擦洗,使累托石矿物微粒较充分地分散解离,然后通过离心力场的作用,使累托石与水云母、叶腊石、绿泥石、石英等脉石矿物分离,累托石精矿纯度达90％左右,B03的使用为工业生产高纯累托石产品奠定了基础。