碱土金属在萃取剂与树脂间反应平衡常数的测定

研究了碱土金属离子在Ｄ００１树脂与８－羟基喹啉三氯甲烷溶液间的平衡常数Ｏ－ｔＫ的测定。其值依Ｍｇ、Ｃａ、Ｓｒ、Ｂａ次序减小。并得出萃取剂浓度［ＨＡ］。与金属离子在两相分配的关系。     

Irganox(R) HP-136的抗氧化机理及对聚丙烯加工稳定性的影响

介绍了Irganox(R) HP-136在PP加工中的作用,表明它能有效地捕获烷基自由基,与传统的受阻酚类及亚磷酸酯类抗氧剂复配与传统的二元抗氧稳定体系相比,具有添加量少、抗氧性能优等优点.比较了Irganox(R) HP-136(3-芳基-苯并呋喃酮)与传统抗氧剂的抗氧机理,并分析了在聚合物稳定体系中的作用.     

聚乙二醇-400催化合成橙花醚的研究

研究了利用多种相转移催化剂在不同条件下合成橙花醚。结果表明：采用聚乙二醇 ４００（ＰＥＧ ４００）为催化剂，当β 萘酚：溴乙烷：催化剂＝１：１２：００７（摩尔比）、温度为７６℃、反应７ｈ时，产率可高达９８１％。     

HS－900有机硅密封抗渗防水剂性能的研究

ＨＳ－９００有机硅密封抗渗防水剂是一种新型的有机硅改性硅酸盐防水材料。具有良好的抗渗性能和耐酸碱腐蚀能力。将其涂于低标号混凝土材料上，效果尤其明显。     

焙烧硫酸铁铵催化合成季戊四醇双缩苯甲醛

以硫酸铁铵经600℃高温焙烧制得一类新型固体酸催化剂，该催化剂在合成季戊四醇双缩苯甲醛中具有较高的催化活性，其优化条件是：苯甲醛与季戊四醇物质的量比为2．0：1，催化剂用量为5％(以醇的质量为准)，回流温度83℃，反应时间2．5h，在此优化条件下，反应产率为87％。且催化剂容易制备，可连续使用。     

国外ABS生产技术进展

综述了世界ＡＢＳ树脂的生产及供求，介绍了各种生产工艺的进展，对其技术特点及产品性能进行了比较。     

Preparation of superparamagnetic immunomicrospheres and application for antibody purification

A novel and effective protocol for the preparation of superparamagnetic immunomicrospheres has been developed. First, micro‐size magnetic poly (methacrylate‐divinylbenzene) (PMA‐DVB) spheres were prepared by a modified suspension polymerization method. The oleic acid coated magnetite (Fe₃O₄) nanoparticles made by coprecipitation were mixed with monomers of MA, DVB, and initiator benzoyl peroxide (BPO) to form oil in water emulsion droplets with the presence of poly (vinyl alcohol) (PVA‐1788) as a stabilizer. The polymerization reaction was carried out in a 2‐L beaker equipped with four vertical stainless steel baffleplates by increasing the temperature of the mixture at a controlled rate. The resulting magnetic microspheres are micro‐sized (less than 8μm in diameter) and 80 percent of them are in the size ranging from 1 to 5 μm. Then, they were highly functionalized via ammonolysis reaction with ethylenediamine, and the surface amino‐modified magnetic microspheres were obtained. The morphology and properties of these magnetic microspheres were examined by SEM, TEM, VSM, and FT‐IR. Affinity ligand protein A (ProtA) was covalently immobilized to the amino‐modified magnetic microspheres by the glutaraldehyde method. These ProtA‐immobilized magnetic immunomicrospheres were effective for affinity bioseparation processes, as was demonstrated by the efficient immunoaffinity purification of antibodies IgG2a (22mg per gram of microspheres) from mouse ascites. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 2205–2211, 2004     

Foaming and chain extension of completely biodegradable poly(propylene carbonate) using DPT as blowing agent

Completely biodegradable foams of poly(propylene carbonate) (PPC) derived from carbon dioxide and propylene oxide were fabricated using N, N′-dinitroso pentamethylene tetramine (DPT) as chemical blowing agent, and urea as the activator to lower the decomposition temperature of DPT. Thermal decomposition behavior and gas evolution behavior of the DPT composite with various urea to DPT ratios were investigated to optimize the composition of the blowing agent. The formulation of blowing agent mixture and foaming condition, the foam morphologies, the molecular weight change, as well as the mechanical properties of produced PPC foams were studied extensively. The experimental results demonstrated that the greatest blowing ratio of 14.8 can be afforded in case 12 phr blowing agent was used at 170 °C for 30 min. Gel permeation chromatography (GPC) and thermal analysis revealed that DPT acted as both chain-extension agent and blowing agent for PPC matrix. The molecular weight of PPC subjected to foaming increased by 76%. The foamed PPC exhibited superior mechanical properties and can be used as packaging material for many practical applications.     

Rheological study on O−carboxymethylated chitosan/cellulose polyblends from LiCl/N,N‐dimethylacetamide solution

An O?carboxymethylated chitosan (O? CMCh) water solution (I) and N,N‐dimethylacetamide (DMAc) emulsion (II) were blended with a cellulose LiCl/DMAc solution, and corresponding polyblends (Polyblends I and II) were obtained. The rheology of the three fluids, that is, the cellulose solution and Polyblends I and II, was investigated. The cellulose solution was characterized by a power‐law fluid. When an O‐CMCh water solution or DMAc emulsion was added to the cellulose solution, the power‐law curve was preserved. The power‐law indexes (n) of all three fluids increased along with the temperature. Polyblend I displays an n close to but a little higher than that of the cellulose solution, while Polyblend II shows a much higher power index than those of the other two fluids. The values of the apparent viscosity (η_a) for all the three fluids are close and decrease along with an increase in the temperature. Adding O‐CMCh microparticles into Polyblends I and II results in a decrease in the structural viscosity index (Δη) in comparison to that of the cellulose solution, and this effect is very obvious for Polyblend I. A cellulose solution's Δη declines with the augmentation of temperature, while the Δη's of both Polyblends I and II show minimum values at about 323 K. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1719–1725, 2003     

A perceptual evaluation of grating frequencies and velocities in the analysis of dynamic images

Dynamic images that possess beauty and are user-friendly can increase the use of digital technology. In addition to information conveyance, dynamic images also act as a communication bridge in the human–machine interface. Dynamic images are widely used in the application of digital media. Therefore, understanding the visual effects of dynamic images on viewers is a very important issue. From a visual communication design perspective, dynamic images influence not only image quality, but also the viewers’ perception and impression of the displayed image. In the contemporary age characterized by universal usage of dynamic images, designers should attain synchronized knowledge and understanding of relevant media technology so as to present preferred design quality in the management of digital design such as animation design, Web page design, multimedia design, and so on. The current study noted that psychological effects such as viewers’ visual attention, preferences, and understanding were more important than image quality. Therefore, this study adopted the viewpoint of “visual design” and conducted a perceptual evaluation of grating frequency and grating velocity. The pair-comparison method and scale method were adopted in the research methodology to simplify perceptual evaluations and enhance their validity. The purpose of this study was: (1) To propose recommendations for displaying dynamic images and improving image performance using perceptual evaluation methods. (2) To examine the influence of psychological factors on viewer’s comfort when they experience dynamic images. (3) To identify the best grating feature combinations that meet viewer’s psychological characteristics and propose recommendations for dynamic images design. The study concludes that it is useful to establish criteria for evaluating users’ perception and to, develop perceptual evaluations of dynamic images. It is recommended that designers find a balance between watching a moving imaging display “clearly” and watching it “comfortably” for successful reception by the viewer.