A perceptual evaluation of grating frequencies and velocities in the analysis of dynamic images

Dynamic images that possess beauty and are user-friendly can increase the use of digital technology. In addition to information conveyance, dynamic images also act as a communication bridge in the human–machine interface. Dynamic images are widely used in the application of digital media. Therefore, understanding the visual effects of dynamic images on viewers is a very important issue. From a visual communication design perspective, dynamic images influence not only image quality, but also the viewers’ perception and impression of the displayed image. In the contemporary age characterized by universal usage of dynamic images, designers should attain synchronized knowledge and understanding of relevant media technology so as to present preferred design quality in the management of digital design such as animation design, Web page design, multimedia design, and so on. The current study noted that psychological effects such as viewers’ visual attention, preferences, and understanding were more important than image quality. Therefore, this study adopted the viewpoint of “visual design” and conducted a perceptual evaluation of grating frequency and grating velocity. The pair-comparison method and scale method were adopted in the research methodology to simplify perceptual evaluations and enhance their validity. The purpose of this study was: (1) To propose recommendations for displaying dynamic images and improving image performance using perceptual evaluation methods. (2) To examine the influence of psychological factors on viewer’s comfort when they experience dynamic images. (3) To identify the best grating feature combinations that meet viewer’s psychological characteristics and propose recommendations for dynamic images design. The study concludes that it is useful to establish criteria for evaluating users’ perception and to, develop perceptual evaluations of dynamic images. It is recommended that designers find a balance between watching a moving imaging display “clearly” and watching it “comfortably” for successful reception by the viewer.     

Development of polarization ratio model for sea surface wind field retrieval from TerraSAR-X HH polarization data

In this article, the polarization ratio (PR) of TerraSAR-X (TS-X) vertical–vertical (VV) and horizontal–horizontal (HH) polarization data acquired over the ocean is investigated. Similar to the PR of C-band synthetic aperture radar (SAR), the PR of X-band SAR data also shows significant dependence on incidence angle. The normalized radar cross-section (NRCS) in VV polarization data is generally larger than that in HH polarization for incidence angles above 23°. Based on the analysis, two PR models proposed for C-band SAR were retuned using TS-X dual-polarization data. A new PR model, called X-PR hereafter, is proposed as well to convert the NRCS of TS-X in HH polarization to that in VV polarization. By using the developed geophysical model functions of XMOD1 and XMOD2 and the tuned PR models, the sea surface field is retrieved from the TS-X data in HH polarization. The comparisons with in situ buoy measurements show that the combination of XMOD2 and X-PR models yields a good retrieval with a root mean square error (RMSE) of 2.03 m s^–1 and scatter index (SI) of 22.4%. A further comparison with a high-resolution analysis wind model in the North Sea is also presented, which shows better agreement with RMSE of 1.76 m s^–1 and SI of 20.3%. We also find that the difference between the fitting of the X-PR model and the PR derived from TS-X dual-polarization data is close to a constant. By adding the constant to the X-PR model, the accuracy of HH polarization sea surface wind speed is further improved with the bias reduced by 0.3 m s^–1. A case acquired at the offshore wind farm in the East China Sea further demonstrates that the improvement tends to be more effective for incidence angles above 40°.     

铅酸电池管式正极添加四碱式硫酸铅晶种的研究

在铅酸电池正极铅粉中加入一定量的四碱式硫酸铅（4BS）,按照工业化的操作工艺,制备出原料中4BS含量不同的正极板,并与常规负极板组装成小电池。对正极的初始容量和循环寿命等电化学性能做了测试,结果表明,在添加粒径为1.5 μm的4BS质量分数达1%时,65 ℃固化后,正极初始容量和循环寿命分别为未加4BS正极的1.02倍和1.06倍,4BS的加入提升了电池容量和电池寿命等的综合性能;XRD结果显示,原料中加4BS的正极中β-PbO₂含量稍高于未加4BS的正极;SEM结果显示,加4BS的正极活性物质更细小,大小更均匀。     

论析新中国“十七年”工具性艺术观的成因

"十七年"艺术观的政治工具性成因非常复杂,既受当时国内外政治语境的制约,也受到来自苏联的政治化艺术观的影响,同时,也是对中国古代"诗教"、"温柔敦厚"、"文以载道"传统艺术观的内在传承。另外与"五四"新文化运动批判传统又回归"载道"传统不无关联。分析"十七年"工具性艺术观的成因,是希图通过了解那不可改变的客观历史,尝试改变某些可改变的当下因素,以加速艺术理论现代化建设。     

压痕残余应力对氮化硅基复合材料阻力曲线行为的影响

通过压痕小裂纹直接量测法获得了ＴｉＣ，ＴｉＮ／Ｓｉ３Ｎ４复合材料的阻力曲线，采用更具合理性的指数经验公式拟合处理实验数据，初步探讨了Ｋ∞，Ｋ＾＊Ｒ，ΔＣ，等参数的物理意义。对压痕残余应力消除前 实验结果进行比较，发现压痕残余应力的消除，提高了材料的极限断裂韧性值Ｋ＾＊Ｒ，却大大减少了裂纹稳态生长的容限，使得材料的脆性行为更为突出。     

尿基复合肥生产技术的改进

通过分析尿基复合肥生产过程中出现的问题，并相应提出技术改进措施，优化操作，对复合肥产量的提高和产品质量的控制都取得了明显的效果。     

两亲性无规共聚物MAA-SMA-PEGMA的表面活性研究

利用功能性单体甲基丙烯酸(MAA)、甲基丙烯酸十八烷基酯(SMA)和聚乙二醇甲基丙烯酸酯(PEG-MA)通过自由基共聚,合成了两亲性共聚物Poly(MAA-SMA-PEGMA)。研究了其结构、临界胶束浓度(CMC)和表面张力,探讨了由共聚物与低分子表面活性剂组成的复配体系。结果表明高低分子表面活性剂复配体系在质量比为5∶5后,体系的表面张力和临界胶束浓度都有所降低,接近于低分子表面活性剂。     

处理温度对锐钛型TiO2光催化活性的影响及利用可见光降解甲基紫

高温处理锐钛型TiO2可以使其转晶以改变晶型比例,因此加热温度和加热时间是影响TiO2光催化活性的主要因素.本研究中,以该方法得到了可利用可见光的TiO2催化剂,并进行了可见光降解甲基紫的研究.结果表明,在TiO2和可见光共同作用下,甲基紫的光降解效果明显优于单独使用锐钛型、金红石型和按照转晶的比率混合的锐钛型和金红石型TiO2.5.0小时的照射其降解率即可达到94.2%以上.而相同条件下,采用锐钛型、金红石型和按照转晶的比率混合的锐钛型和金红石型TiO2降解率分别只有55.82%、51.20%和40.47%.     

Preparation and properties of PET/PA6 copolymer/montmorillonite hybrid nanocomposite

From in situ polycondensation, a poly(ethylene terephthalate)/Polyamide 6 copolymer/montmorillonite nanocomposite was prepared, after the treatment of montmorillonite (MMT) with a water soluble polymer. The resulting nanocomposites were characterized by X‐ray diffraction (XRD), differential scanning calorimeter (DSC), nuclear magnetic resonance (NMR), dynamic mechanical analysis (DMA), and transmission electron microscopy (TEM). The results of DSC, ¹H NMR, and DMA proved that the nanocomposite synthesized was PET/PA6 copolymer/MMT nanocomposite, not the PET/PA6 blend/MMT nanocomposite. The results of XRD and TEM proved that the dispersion of MMT was improved observably after the introduction of PA6 molecular chain into PET. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2512–2517, 2006     

碳纤维水泥石电阻测试方法研究

准确测量碳纤维水泥石的电阻率是碳纤维水泥石的压敏和温敏性能得以应用的关键问题之一。已有研究表明，电阻率测量结果准确性受电极的制作形式及电阻的测试方法影响较大。本文在试验的基础上，分析了几种适用于碳纤维水泥石的电极布置形式的特点及两极法和四极法对电阻测试结果的影响。研究表明，碳纤维水泥石电阻宜采用插入式四极法测量。