Analysis of correlation and total power radiometer front-ends using noise waves

A complete and systematic noise analysis of radiometer front-ends, including both total power and correlation measurements, is presented. The procedure uses the concepts of noise waves and S-parameters, widely used in microwave systems design and takes into account full noise characterization of receivers including mismatch effects. The general formulation is compatible with known total power radiometer analysis and is specially appropriate in correlation radiometers for which the effect of nonideal components, such as input isolators, is analyzed. Along with numerical simulations, simple formulas are given to compute the measured visibility in nonideal conditions. The analysis is validated using experimental results consisting of correlation measurements of four receivers placed inside an anechoic chamber. Good agreement between theoretical predictions and experimental data is observed.     

Thermomagnetic Flux-Jump Instabilities and Second Magnetization Peak in Bi2Sr2CaCu2O8 High-T c Superconducting Crystals

Measurements of the magnetization hysteresis loop performed on Bi ₂ Sr ₂ CaCu ₂ O ₈ high-T_c superconducting single crystals reveal the occurrence of pronounced jumps of the irreversible magnetization at T > 40 K. In this work we demonstrate their thermomagnetic origin. It is also shown that the low-field hollow in the magnetization hysteresis loops measured at T < 40 K and leading to the so-called second magnetization peak, is the manifestation of a thermomagnetic instability effect. It is suggested that the plastic vortex motion triggers the magnetic instabilities.     

Analysis of underivatizated patulin by a GC-MS technique

An alternative approach based on the use of gas chromatography-mass spectrometry (GC-MS) is used to confirm the presence of patulin in apple juice. In the gas chromatography (GC) methods previously described, derivatization of patulin was always necessary in order to achieve good chromatographic detection. The use of electronic pressure control (EPC) and on-column injection avoids the need for patulin derivatization and allows a sensitive analysis of patulin. A detection limit of 4 microg/liter in apple juice can be attributed to the method.     

Remote Control of Mechanical Forces via Mitochondrial‐Targeted Magnetic Nanospinners for Efficient Cancer Treatment

In cells, mechanical forces play a key role in impacting cell behaviors, including adhesion, differentiation, migration, and death. Herein, a 20 nm mitochondria‐targeted zinc‐doped iron oxide nanocube is designed as a nanospinner to exert mechanical forces under a rotating magnetic field (RMF) at 15 Hz and 40 mT to fight against cancer. The nanospinners can efficiently target the mitochondria of cancer cells. By means of the RMF, the nanocubes assemble in alignment with the external field and produce a localized mechanical force to impair the cancer cells. Both in vitro and in vivo studies show that the nanospinners can damage the cancer cells and reduce the brain tumor growth rate after the application of the RMF. This nanoplatform provides an effective magnetomechanical approach to treat deep‐seated tumors in a spatiotemporal fashion.     

Phase measurement in temporal speckle pattern interferometry: comparison between the phase-shifting and the Fourier transform methods

The measurement of dynamic displacements by use of speckle pattern interferometry and temporal phase unwrapping allows for the evaluation of large-object displacement fields without the propagation of spatial unwrapping errors. If a temporal carrier is introduced in one of the beams of the interferometer, phase data for whole-object displacement can be retrieved by use of a temporal phase-shifting method or a temporal Fourier transformation approach. We present a comparison between both methods of temporal phase measurement in terms of precision and execution speed. We performed the analysis by using computer-simulated speckle interferograms, an approach that allowed us to know precisely the original phase distribution and also to determine the spatial rms phase error as a function of the phase change introduced between two consecutive speckle interferograms. The performance of both methods to process experimental data is also illustrated by use of the results from a high-speed speckle interferometry study of a carbon fiber panel.     

A linear-interpolation-based controller design for trajectory tracking of mobile robots

This work presents a novel linear interpolation based methodology to design control algorithms for the trajectory tracking of mobile robotic systems. Particularly, a typical nonlinear multivariable system—a mobile robot—is analysed. The methodology is simple and can be applied to the design of a large class of control systems. Simulation and experimental results are presented and discussed, demonstrating the good performance of the proposed methodology.     

Philippine computing—an overview

This study evaluates the capacity of the Internet to enhance development in emerging regions through Sen's freedom perspective. The paper begins with a qualitative evaluation of the Internet's potential as a freedom enhancer through examples and literature study. It then presents a quantitative evaluation based on web access logs obtained from the AirJaldi network in rural India. We categorize the data based on Sen's freedoms to contribute an information and communication technology-freedom taxonomy and note the challenges in doing so. The usage logs indicate that indeed users may have experienced enhancement in all of Sen's freedom categories; yet our qualitative evaluation suggests there is much unexploited potential. We conclude that it is important to look at the Internet-based Information and Communication Technologies for Development (ICTD) projects through Sen's freedom lens and call for such projects to be evaluated based on these broad freedom goals rather than on focused development goals.     

Chloride bound to oxidized cytochrome c oxidase controls the reaction with nitric oxide

The reaction of nitric oxide (NO) with oxidized fast cytochrome c oxidase was investigated by stopped-flow, amperometry, and EPR, using the enzyme as prepared or after "pulsing." A rapid reduction of cytochrome a is observed with the pulsed, but not with the enzyme as prepared. The reactive species (lambdamax = 424 nm) reacts with NO at k = 2.2 x 10(5) M-1 s-1 at 20 degreesC and is stable for hours unless Cl- is added, in which case it decays slowly (t1/2 approximately 70 min) to an unreactive state (lambdamax = 423 nm) similar to the enzyme as prepared. Thus, Cl- binding prevents a rapid reaction of NO with the oxidized binuclear center. EPR experiments show no new signals within 15 s after addition of NO to the enzyme as prepared. Amperometric measurements show that the pulsed NO-reactive enzyme reacts with high affinity and a stoichiometry of 1 NO/aa3, whereas the enzyme as prepared reacts to a very small extent (<20%). In both cases, the reactivity is abolished by pre-incubation with cyanide. These experiments suggest that the effect of "pulsing" the enzyme, which leads to enhanced NO reactivity, arises from removing Cl- bound at the oxidized cytochrome a3-CuB site.     

A 2-year follow-up study of work ability among college educators

The aim of this study was to evaluate work ability among college educators before and after an intervention at the workplace. An administrative restructuring in the workplace started to be implemented in 2005. The work ability index (WAI) was administered to 154 educators before the restructure in 2004 and to 60 educators following the restructure in 2006. A t-test comparing the WAI score of the 60 educators who took part in both phases showed a trend of improving work ability (p=0.06; mean WAI in 2004 was 41.7 and 43.3 in 2006). The results suggest that the intervention led to an improvement in psychosocial factors, which in turn positively influenced work ability.     

Optimal input design for set-membership identification of Hammerstein models

In this paper the problem of optimal input design for the identification of Hammerstein models is considered under the assumption that the linear dynamic part of the model is a FIR and that lower and upper bounds are available for the additive measurement errors. The parameters of the Hammerstein model can then be estimated via the identification of a linearized augmented Hammerstein model . External approximations of the feasible intervals for the parameters of the original Hammerstein models are then derived (which may correspond to the actual feasible intervals). This paper deals with the design of input sequences minimizing parameter uncertainty for the linearized augmented Hammerstein model . Some new results are also reported about optimal input design for polynomial non-linear blocks, that may be part of Hammerstein models.