面向大规模定制的虚拟设计研究

综述了大规模定制的范围经济性和面向大规模定制的基本设计方法，并提出了一个虚拟设计框架，该框架改变了传统的设计模式，利用先进的设计方法学和仿真支撑技术为产品开发提供了最大柔性和敏捷性。同时，它提供了一个多学科合作的设计环境，用户直接参与进设计循环中。最后，结合新型剑杆织机的开发，展示了一个能够支持新产品快速成功开发的虚拟设计环境。     

Three‐dimensionally braided carbon fiber–epoxy composites,a new type of material for osteosynthesis devices. I. Mechanical properties and moisture absorption behavior

In recent years, three‐dimensionally (3D) braided composites have attracted a great deal of attention because of their high‐impact damage tolerance and fatigue life, superior fracture toughness, and so forth, and have been used in aeronautics, military, and transportation. These advantages make them strong candidates for osteosynthesis devices. In this study, 3D braided carbon fiber–epoxy (C_3D/EP) composites were produced via a simple vacuum impregnation technique. The load‐deflection curve, mechanical properties, and influence of fiber volume fraction, braiding angle, and axial reinforcing fibers were examined to determine their suitability for internal fixation devices. It is found that the C_3D/EP composites have excellent toughness and do not show brittleness when fractured because of their relatively high void content. The flexural, shear, and impact strengths of the C_3D/EP composites are excellent. It was shown that a C_3D/EP composite with a stiffness similar to load‐bearing bones can be made while maintaining enough strength. It is concluded that a relatively higher void content and braiding angle is more suitable for the C_3D/EP composites from the viewpoint of requirements of fracture fixation materials. The moisture absorption behavior and changes in mechanical properties caused by moisture uptake were evaluated. Results show that absorbed moisture slightly decreases mechanical properties of the C_3D/EP composites. Contrary to the unreinforced epoxy, the moisture absorption behavior of the C_3D/EP composites cannot be described with Fick's law of diffusion, probably because of the presence of voids and/or 3D fiber structure. The exact mechanisms should be proposed in further investigations. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1031–1039, 2002     

开发PROFIBUS-DP智能从站

简单介绍了PROFIBUS－DP现场总线，同时讨论了利用89C52单片机和PROFIBUS－DP从站芯片SPC3开发PROFIBUS－DP智能从站的软硬件设计方法。     

安钢宽板坯连铸机达产实践

分析了安钢宽板坯连铸机在热试车期间出现的生产问题,总结出制约生产主要因素,制定针对性措施,使该连铸机在较短时间内实现达产创效.     

非平衡等离子体协同作用光催化剂催化降解苯

采用非平衡等离子体与光催化剂相结合,对苯的降解进行了实验研究。考察了以不同吸附能力的玻璃球和γ-Al2O3为载体对苯降解率、碳平衡、CO2选择性、NOx及O3生成量的影响;研究了以γ-Al2O3为载体时,水蒸气含量对苯的降解率、碳平衡、CO2选择性、NOx及O3生成量的影响。实验结果表明,以具有吸附性的γ-Al2O3为载体可提高苯的降解率;当能量密度为618J/L时,苯的降解率可达98%;同时可降低O3的生成量,但NOx生成量增加;以γ-Al2O3为载体时,随水蒸气含量的增加,苯的降解率降低,特别是在低能量密度时,水蒸气对苯降解率的影响更为显著,但水蒸气的加入可抑制O3的生成,同时可提高碳平衡值。     

山药

山药是一种常用的中药，营养丰富，具有较高的药疗价值，现对山药的化学成分、药理作用、临床应用的研究进展作一介绍。     

安徽省旱涝急转规律的认识与研究

旱涝急转是指某一地区或某一流域发生较长时间干旱时，突遇集中强降雨，引发山洪暴发、河水陡涨．客水入侵、内水难以及时外排的一种自然现象。旱涝急转极易造成人员伤亡、水库垮坝等重大经济损失。在防汛抗旱中，安徽省要充分认识旱涝急转的危害性，加强应急管理，具体包括思想上保持高度的警觉，加快防汛抗旱工程体系和预测预警体系建设，有效应对旱涝急转。     

PLC在葛洲坝大江电厂机组辅助设备控制中的应用

PLC(可编程控制器)在机械工业和电力生产等部门应用广泛。在电力生产部门主要用于集中控制,已有较好的效果。介绍了PLC在葛洲坝水电厂机组辅助设备控制操作功能中的应用回顾及其展望。     

新型PDC钻头的防斜打快效果及评价

大庆油田海拉尔地区的地层倾角大、岩屑录井荧光级别低,亟待解决满足岩屑录井要求的防斜打直问题。为了能够在获得足够大的岩屑颗粒和提高机械钻速的基础上达到防斜打直的目的,制定了采用大切削齿B425型PDC钻头配以小钟摆钻具组合的现场试验方案。试验表明:B425钻头与牙轮钻头所破碎的岩屑颗粒基本相当,能够满足地质岩屑录井的要求;与牙轮钻头相比,B425钻头显著地提高了机械钻速,降低了钻头费用,减少了起下钻次数;单只B425的进尺可达1000m以上,相当于2~3只牙轮钻头的进尺;采用PDC钻头配以小钟摆钻具组合,可以较好地解决防斜打直问题。此外,针对试验中遇到的问题,通过改进井身结构和调整钻井参数,形成了一套适合于海拉尔地区的防斜打快技术。