An assay on the effect of preliminary restoration tasks applied to a large TENORM wastes disposal in the south-west of Spain

A large industrial wastes disposal site, where two phosphate rock processing plants release their wastes, located close to Huelva town (SW of Spain), has been partially submitted to restoration as a preliminary step in a possible decomissioning process. Due to the high natural radioactivity contents of these wastes, this repository is considered as a radiological anomaly, being actually considered as TENORM (technically enhanced naturally occurring radioactive materials). The efficiency of this restoration from the radiological point of view according to the new European regulatory framework was evaluated in this work. The results allow to conclude that, as a consequence of the partial restoration works, the external dose rate has been drastically reduced above the repository system. Nevertheless, special attention must be paid on the occupational factor to be applied to workers on the unrestored system. The application of a dosimetric model allows the prediction of the negative effects of using certain industrial wastes as a cover system in this restoration/mitigation task.     

Development of ultrafiltration membranes from acrylonitrile co-polymers

Summary Hydrophobic polymer surfaces show higher tendency to protein adsorption and bacteria attachment, thus hydrophobic polymeric membranes foul rapidly in water purification operations. A change in membrane surface properties can reduce fouling; this may be accomplished by increasing the hydrophilicity of the membrane surface, and by using a membrane with smaller pore size. The ultrafiltration membranes were prepared via phase inversion process in our laboratory. Negatively charged hydrophilic ultrafiltration membranes were prepared from acrylonitrile-vinyl acetate (CP16)/Acrylonitrile-vinyl acetate-sodium p-sulfophenyl methallyl ether (CP24). Scanning electron microscopy (SEM) revealed the asymmetric structure of these membranes. The roughness of the surface was measured by atomic force microscopy (AFM). The basic characteristics of these membranes like water permeability, water content and membrane selectivity were also measured. Received: 29 April 2001/Revised version: 14 September 2001/Accepted: 14 September 2001     

Survey of clenbuterol in bovine muscle and liver in Ecuador

ABSTRACT

Clenbuterol is a steroid-type drug used in respiratory treatments in both humans and animals. However, it has a secondary effect related to the hypertrophy process in muscle and fat reduction. The illegal or bad use of clenbuterol has been reported in several countries, but there is scarce information in South America, where the production and consumption of meat are considerable. In this sense, the present study aimed at evaluating the occurrence of clenbuterol in bovine muscle and liver samples from a high cattle production area of Ecuador in 2015 and 2018. For this purpose, 57–58 samples were evaluated in 2015 and 20 samples in 2018 using the Enzyme-Linked Inmuno Sorbent Assay and ultrahigh-performance liquid chromatography-tandem mass spectrometry. The results showed complained results for clenbuterol in meat samples from both years and 23% (2015) and 85% (2018) of the samples of meat complied the maximum residue level defined by CODEX.     

Forcespinning technique for the production of poly(d,l-lactic acid) submicrometer fibers: Process–morphology–properties relationship

This work addresses a systematic study for the process development and optimization of poly(d ,l -lactic acid) (PDLLA) submicrometer fibers utilizing the centrifugal spinning technique known as Forcespinning. This study analyzes the effect of polymer concentration (8, 10, and 12 wt %) and angular speed on the fiber morphology, diameter distribution, and fiber yield. The increase in polymer concentration and angular speed favored the formation of continuous and homogeneous submicrometer fibers with an absence of bead formation and higher output. The optimal conditions were established considering the morphological characteristics that exhibit a greater surface area (homogeneous and submicrometer fibers); and they were achieved at a polymer concentration of 10 wt % at an angular speed ranging from 8000 to 10 000 rpm. Optimization of PDLLA submicrometer fiber fabrication lays the groundwork for scaling up the process and serves as a platform to further develop promising applications of PDLLA nonwoven mats, particularly in the biomedical area such as in scaffolds for tissue engineering. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47643.     

Mitral valve replacement: randomized trial of St. Jude and Medtronic Hall prostheses

BACKGROUND: This study was designed to better define the merits of the bileaflet and tilting-disc valves. METHODS: We prospectively randomized 156 patients (mean age, 59 years) to receive either the St. Jude (n = 80) or the Medtronic Hall (n = 76) mitral valve prosthesis between September 1986 and December 1997. The two groups were not significantly different with respect to preoperative New York Heart Association class, left ventricular ejection fraction, incidence of mitral stenosis or insufficiency, extent of coronary artery disease, completeness of revascularization, or cross-clamp or bypass time. RESULTS: The operative mortality (11.2% versus 13.1%, St. Jude versus Medtronic Hall, respectively) and late mortality (27% versus 22%, St. Jude versus Medtronic Hall, respectively) were not significantly different. Follow-up was complete in all hospital survivors with a mean of 60.7 months (range, 1 to 133 months). The analysis of 10-year actuarial survival and freedom from valve-related events demonstrated no significant differences between the cohorts. Freedom from reoperation was higher in the St. Jude group (p < 0.01). Comparisons of patient functional status and echocardiographic hemodynamic parameters obtained at the time of follow-up demonstrated no significant differences between the two prostheses. CONCLUSIONS: This study suggests that there is no difference between the St. Jude and Medtronic Hall prostheses with respect to late clinical performance or hemodynamic results and therefore does not support the preferential selection of either prosthesis.     

Usefulness of exercise test in programming dual chamber pacemakers

Prospectively, we studied 42 patient to evaluate the usefulness of treadmill exercise to programme pacemaker DDD in relation to the functioning upper frequency (relation between block frequency of pacemaker and the upper rate frequency). We excluded patient who had no treadmill exercise test after implant pacemaker. During stress 7 (17%) patient presented AV conduction 1:1 (group I); 16 (38%) second degree AV block type Wenckebach (group II); 14 (33%) second degree AV block 2:1 (group III); and 5 (12%) showed inhibition of the pacemaker by intrinsic activity (group IV). Block frequency of the pacemaker in group I and II was superior in regard of the upper rate frequency, 156.85 +/- 22.16 vs 141.43 +/- 20.82 and 135.25 +/- 11.54 vs 121.25 +/- 5.9, respectively. In group III and IV, it was lower, 120.36 +/- 15.31 vs 138.57 +/- 13.29 and 121.0 +/- 7.38 vs 142.0 +/- 14.39. The comparative analysis of the block frequency of the pacemaker in relation with the upper rate frequency showed statistically significant differences (p < 0.05) between groups I and II, and between the group I and III. The appearance of second degree AV block 2:1 is nonphysiologic, is rather due to an abrupt falling in the cardiac output. This phenomenon is able to be predicted and corrected by programming with the use the telemetry with parameters as the AV delay, as well as upper rate frequency and post-ventricular refractory atrial period.     

Experimentally contaminated reabsorbable meshes: their evolution in abdominal wall defects

The effect of maternal hyperglycemia on fetal regional circulation in appropriate for gestational age and small for gestational age fetuses was evaluated. Color Doppler flow imaging and pulsed Doppler ultrasonographic assessments were made on 15 appropriate for gestational age and 19 small for gestational age fetuses, ranging from 33 to 40 weeks' gestation before, 60 minutes, and 120 minutes after a maternal 75 g glucose load. The pulsatility index (PI) was calculated for middle cerebral artery, descending aorta, splenic artery, renal artery, femoral artery, and umbilical artery. Simultaneously, maternal plasma glucose concentration was measured. Baseline PI value (1.50 +/- 0.31) for middle cerebral artery in small for gestational age fetuses was significantly lower than that (1.89 +/- 0.37) in appropriate for gestational age fetuses (p < 0.05); however, there were no significant differences in baseline PI values for other arteries in both groups. In appropriate for gestational age fetuses, the mean PI decreased from 1.89 +/- 0.37 to 1.47 +/- 0.33 at 60 minutes, and to 1.55 +/- 0.32 at 120 minutes (p < 0.05), but no changes were found in the other arteries. In small for gestational age fetuses, there was no significant change in PI value for each artery before and after maternal glucose load. Maternal hyperglycemia induces a significant decrease in cerebrovascular resistance in appropriate for gestational age fetuses but not in small for gestational age fetuses. These results provide a foundation for evaluating the effect of maternal hyperglycemia on fetal regional circulation.     

Development of a metric to assess the complexity of assembly/disassembly tasks in open architecture products

This paper describes two metrics to measure the complexity involved in assembly and disassembly tasks for open architecture products during its use phase. The approach proposed is based on the summary of all tasks required to assemble and disassemble a predefined set of modules to generate several product variants, which comprise different working levels or functionalities. The aim of the method is to provide a useful tool to designers in the analysis of product complexity regarding use and further phases in which the assembly and disassembly of modules are required. The benefits and usefulness of the metrics are oriented to enhance the sustainability performance of products through the measurement of complexity in modular systems for the decision-making during the design stage. The reduction of complexity involves significant benefits in all lifecycle phases of product, especially when the user or customer is responsible for many related tasks (maintenance, upgrading, reconfiguration and final disposal of modules). The metrics and their calculation process are illustrated using two case study products.