Summary Living polystyrene microparticles with average particle diameters varying between 0.5 and 3.8 m were obtained via sec-butyl lithium-initated anionic polymerization of styrene in n-hexane diluent when polystyrene-block-poly(4-trimethyl-silylstyrene) was added as dispersing agent. The influence of block copolymer molecular architecture and concentration as well as polymerization temperature, monomer concentration and THF addition on polystyrene particle size, molecular weight and molecular weight distribution were investigated. In comparison to anionic styrene polymerization in cyclohexane solution, the anionic styrene dispersion polymerization in n-hexane was markedly slower. 相似文献
Wet filament winding technology has been extensively used for the manufacture of rotationally symmetric parts made of fiber-reinforced plastics (FRP). As the design and modeling of FRP-parts require numerous assumptions, deviations between calculated and achieved mechanical properties are expected. One aspect that contributes to this discrepancy is the assumption of a homogeneous rectangular cross-section of the fiber-band. In this work, the fiber-band geometry in a wet-winding process of carbon fiber cylinders is analyzed. An Infrared-optical system for the detection of the fiber bandwidth and winding-angle is implemented. The influence of the winding speed and the resin temperature is analyzed. An image processing algorithm for the automatic measurement of the fiber's bandwidth and winding-angle is developed. Manual and adaptive gamma corrections are implemented to improve image quality. A parameter study for the suitable selection of image processing parameters is performed. 相似文献
In this perfusion magnetic resonance imaging study, the performances of different pseudo-continuous arterial spin labeling (PCASL) sequences were compared: two-dimensional (2D) single-shot readout with simultaneous multislice (SMS), 2D single-shot echo-planar imaging (EPI) and multishot three-dimensional (3D) gradient and spin echo (GRASE) sequences combined with a background-suppression (BS) module.
Materials and methods
Whole-brain PCASL images were acquired from seven healthy volunteers. The performance of each protocol was evaluated by extracting regional cerebral blood flow (rCBF) measures using an inline morphometric segmentation prototype. Image data postprocessing and subsequent statistical analyses enabled comparisons at the regional and sub-regional levels.
Results
The main findings were as follows: (i) Mean global CBF obtained across methods was were highly correlated, and these correlations were significantly higher among the same readout sequences. (ii) Temporal signal-to-noise ratio and gray-matter-to-white-matter CBF ratio were found to be equivalent for all 2D variants but lower than those of 3D-GRASE.
Discussion
Our study demonstrates that the accelerated SMS readout can provide increased acquisition efficiency and/or a higher temporal resolution than conventional 2D and 3D readout sequences. Among all of the methods, 3D-GRASE showed the lowest variability in CBF measurements and thus highest robustness against noise.
An Fe-15 at.% Al alloy has been exposed to a strongly carburising CO–H2–H2O gas mixture under metal dusting conditions. Cementite (Fe3C) was detected to be present only in the coke which is a reaction product of the high-temperature corrosion metal dusting. Needle- or plate-like κ-phase (Fe3AlCx) precipitates close to the surface were identified by means of electron back-scattered diffraction (EBSD). EBSD analyses of several precipitates and neighboured matrix areas indicate a Nishiyama–Wassermann orientation relationship between the κ-phase precipitates and the -Fe(Al) matrix. 相似文献
Electrochemical dressing of fine-grained metal-bonded diamond grinding wheels enables to grind hard and brittle materials
in the ductile mode. Optical surfaces can be manufactured by grinding, which reduces the need for subsequent, time-consuming
polishing work. When using metal-bonded grinding wheels, the emerging oxides regulate the electrochemical dissolution. Bronze-bonded
grinding wheels are more suitable for grinding cemented carbides and ceramics than iron-bonded grinding wheels, as it is easier
to modify their chemical composition to suit a specific grinding task. They can also be sintered at lower temperatures, which
reduces the risk of thermal damage to the diamond. In this paper, the dissolution and the oxidation of different bronze alloys
are characterized for the electrochemical dressing process. The relevant evaluation criteria are the oxide layer thickness,
the electrical behavior and the different emerging bronze alloy oxides.
This work is funded by the German Research Association DFG within the Transregional Collaborative Research Center SFB/TR4
“Process Chains for the Replication of Complex Optical Elements”. 相似文献
Droplet-based microfluidic allows high throughput experimentation in with low volume droplets. Essential fluidic process steps are on the one hand the proper control of the droplet composition and on the other hand the droplet processing, manipulation and storage. Beside integrated fluidic chips, standard PTFE-tubings and fluid connectors can be used in combination with appropriate pumps to realize almost all necessary fluidic processes. The segmented flow technique usually operates with droplets of about 100–500 nL volume. These droplets are embedded in an immiscible fluid and confined by channel walls. For the integration of segmented flow applications in established research workflows—which are usually base on microtiter plates—robotic interface tools for parallel/serial and serial/parallel transfer operations are necessary. Especially dose–response experiments are well suited for the segmented flow technique. We developed different transfer tools including an automated “gradient take-up tool” for the generation of segment sequences with gradually changing composition of the individual droplets. The general working principles are introduced and the fluidic characterizations are given. As exemplary application for a dose–response experiment the inhibitory effect of antibiotic tetracycline on Escherichia coli bacteria cultivated inside nanoliter droplets was investigated. 相似文献
In this paper, the multiclass supervised training problem is considered when a discrete set of classes is assumed. Upon generating affine models for finite data sets, we have observed the invariance of certain measures of performance after a trained classifier has been presented with test data of unknown classification. Specifically, after constructing mappings between training vectors and their desired targets, the class membership and ranking of test data has been found to remain either invariant or close to invariant under a transformation of the set of target vectors. Therefore, we derive conditions explaining how this type of invariance can arise when the multiclass problem is phrased in the context of linear networks. A bioinformatics example is then presented in order to demonstrate various principles outlined in this work. 相似文献
The response of a novel fiber-optic Raman probe to low levels of trichloroethylene (TCE) vapors is characterized. The detection limit of the current probe for TCE vapor is 34 mg/L, and the probe exhibits a fully reversible response. The probe uses an organic-polymer, low-density polyethylene to concentrate TCE vapors in the optical path of the fiber-optic Raman spectrometer. The relative standard deviation for measurement of 677 mg/L of TCE in the vapor is 0.3%. 相似文献
Ultrasonic surface waves are suitable for the characterization of surface hardened materials. This is shown on laser hardened turbine blades. The martensitic microstructure within the surface layer of surface hardened steels has a lower surface wave propagation velocity than the annealed or normalized substrate material. Because the propagation velocity depends on the ratio of layer thickness to wavelengthd/, its measurement allows the determination of the hardening depth. If the surface wave frequency is high enough, the surface wave propagates mainly within the hardened layer. A correlation of the surface wave velocity to the surface hardness has been found. Because the variation of the surface velocity in hardened steels is small, a high measurement accuracy is necessary to obtain the interesting hardening parameters with sufficient certainty. Therefore, a measuring arrangement has been developed where laser pulses, guided by optical fibers to the surface hardened structure, generate simultaneously surface wave pulses at two different positions. The two ultrasonic pulses are received by a piezoelectric transducer. The surface wave velocity is obtained from the time delay between these pulses which is determined by the cross-correlation method. To evaluate simultaneously surface waves with different penetration depths from the same signal acquisition, digital filtering has been used in connection with the cross-correlation. 相似文献