消失模铸造铸铁件水基涂料的研制

选用石英粉为耐火骨料，酸式磷酸盐为粘结剂，通过正交试验确定了铸铁件消失模水基涂料的最佳配比。经测试和生产验证，其性能良好，能很好地适应生产要求。     

基于CAN总线的核医疗设备测控系统设计

介绍了以DSPIC30F6014单片机为核心控制器进行信号检测,并通过执行机构对设备实现控制.系统采用PC总线方式连接新型的CMOS集成温湿度传感器,同时控制CAN总线控制器和总线收发器MCP2551构成的总线通信系统进行数据传输,通过PCI-CAN适配卡将上位机与控制网络连接起来,完成核医疗设备的分布式测控系统设计.详细介绍了系统构成、部分软硬件设计方法等.     

Study on characteristics of Ni-W-B composites containing CeO2 nano-particles prepared by pulse electrodeposition

Ni-W-B composites containing CeO2 nano-particles on the surface of 45 steel were prepared by pulse electrodeposition,and the in-fluence of pulse frequency,pulse duty circle and heat treatment temperature on the structures and properties were investigated.The results in-dicated that the pulse co-deposition of Ni,W,B and CeO2 nano-particles led to Ni-W-B/CeO2 composites possessing higher microhardness and better wear resistance when heat-treated at 400 oC for 1 h.The microhardness of 636 HV and the deposition rate of 0.0281 mm/h of the as-deposited alloy were the highest at pulse frequency of 1000 Hz,pulse duty circle of 10% and pulse average current density of 10 A/dm2.The composites were mainly in the amorphous state and were partially crystallized as-deposited,and the crystallization trend was strength-ened when heat-treated at 400 oC.Decreasing pulse duty cycle from 75% to 10% was favorable to the refinement in grain structures and im-provement of microstructures.The crystal sizes of the composites were smaller by means of pulse electrodeposition.     

浅析当代自然风格首饰的设计思路

在当代社会中,人们的审美心理在很大程度仍受到自然界的影响,使得自然风格的首饰仍然占据设计风格的主导地位。首饰设计师如何结合当代艺术特征进行自然风格首饰设计,这也成为设计思路的重中之重。本文将结合当代自然风格首饰产生的综合因素,从设计角度进行剖析,指出当代自然风格首饰的设计思路和方向。     

Rapid growth of angle-confined large-domain graphene bicrystals

In the chemical vapor deposition growth of large-area graphene polycrystalline thin films,the coalescence of randomly oriented graphene domains results in a high density of uncertain grain boundaries (GBs).The structures and properties of various GBs are highly dependent on the misorientation angles between the graphene domains,which can significantly affect the performance of the graphene films and impede their industrial applications.Graphene bicrystals with a specific type of GB can be synthesized via the controllable growth of graphene domains with a predefined lattice orientation.Although the bicrystal has been widely investigated for traditional bulk materials,no successful synthesis strategy has been presented for growing two-dimensional graphene bicrystals.In this study, we demonstrate a simple approach for growing well-aligned large-domain graphene bicrystals with a confined tilt angle of 30° on a facilely recrystallized single-crystal Cu (100) substrate.Control of the density of the GBs with a misorientation angle of 30° was realized via the controllable rapid growth of subcentimeter graphene domains with the assistance of a cooperative catalytic surface-passivation treatment.The large-area production of graphene bicrystals consisting of the sole specific GBs with a tunable density provides a new material platform for fundamental studies and practical applications.     

2012年美国自动扣留我出口食品情况分析

本文介绍了2012年美国"自动扣留"我国出口食品的情况,旨在帮助我国政府相关部门和企业全面、深入了解美国"自动扣留"制度,以采取针对性措施,推动我国食品输美更加便利、顺畅,扩大对美食品贸易。     

G型里氏硬度计在测试中的适用性分析

针对用便携G型里氏硬度计对低强度钢板测试其硬度值偏低的现象 ,利用静载台式硬度计及动载里氏硬度计对高强度不锈钢板和低强度结构钢板进行了测试 ,并进行了对比分析。得出 ,对同一低强度钢板 ,用G型里氏硬度计测出的值比台式硬度测试值低。探讨了里氏硬度测试值偏低的原因 ,对使用里氏硬度计测试低强度钢板硬度提供了科学依据。     

A π-extended tetrathiafulvene derivative: Synthesis and photoluminescence properties

Solid-state emissive organic materials have received increasing attention due to their prospective applications in large-area. Here, a novel π-extended tetrathiafulvene derivative DPD with donor-π-donor structure has been newly developed to produce the prominent characteristic of aggregation-induced enhanced emission (AIEE) that exhibits higher fluorescence quantum efficiency in solid film compare to its solutions. The AIEE mechanism of DPD was studied in detail through photophysical investigations and can be dominant attributed to the formed excimer state of DPD and J-aggregates in solid state.     

多不动点约束下的网格变形算法

提出一种多不动点约束下的网格变形算法,能直接对模型进行变形,在算法执行过程中不需要计算控制晶格,具有较低的计算代价。实验结果表明,该算法能够有效改善传统自由变形算法存在的局限性和复杂性问题。     

Image coding quality assessment using fuzzy integrals with a three-component image model

Based on importance measures and fuzzy integrals, a new assessment method for image coding quality is presented in this paper. The proposed assessment is based on two subevaluations. In the first subevaluation, errors on edges, textures, and flat regions are computed individually. The errors are then assessed using an assessment function. A global evaluation with Sugeno fuzzy integral is then obtained based on the importance measure of edge, texture, and flat region. In the second subevaluation, an importance measure is first established depending on the types of regions where errors occur, a subtle evaluation is then obtained using Sugeno fuzzy integral on all pixels of the image. A final evaluation is obtained based on the two subevaluations. Experimental results show that this new image quality assessment closely approximates human subjective tests such as mean opinion score with a high correlation coefficient of 0.963, which is a significant improvement over peak signal-to-noise ratio, picture quality scale, and weighted mean square error, three other image coding quality assessment methods, which have the correlation coefficients of 0.821, 0.875, and 0.716, respectively.