用硫磺盖帽电探针测定工业炸药爆轰压力

文中介绍了利用硫磺盖帽电探针测定工业炸药爆轰压力的方法，并对煤炭工业常的４类１１个品种炸药的爆轰压力进行了实际测量。     

�;��ȶ�����״̬�µ������Ծ���������

本文提出了油井稳定生产状态下的脉冲试井数学模型,利用时间和空间叠加原理求得其解析解。并用非线性回归分析方法来进行脉冲试井分析。     

Controlled oxygen incorporation in indium gallium arsenide and indium phosphide grown by metalorganic vapor phase epitaxy

The defect engineering in metalorganic vapor phase epitaxy In_xGa_1-xAs and InP by controlled oxygen doping using diethyl aluminum ethoxide (DEALO) was developed in this study. DEALO doping has led to the incorporation of Al and O, and the compensation of shallow Si donors in In_xGa_1−xAs: Si with 0 ≤ x ≤ 0.25. With the same DEALO mole fraction during growth, the incorporation of Al and O was found to be independent of x, but the compensation of Si donors decreases with increasing In content. Deep level transient spectroscopy analysis on a series of In_xGa_1-xAs: Si. samples with 0 ≤ x ≤ 0.18 revealed that oxygen incorporation led to a set of deep levels, similar to those found in DEALO doped GaAs. As the In composition was increased, one or more of these deep levels became resonant with the conduction band and led to a high electron concentration in oxygen doped In_0.53Ga_0.47As. Low temperature photoluminescence emission measurements at 12K on the same set of samples revealed the quenching of the near-band edge peak, and the appearance of new oxygen-induced emission features. DEALO doping in InP has also led to the incorporation of Al and O, and the compensation of Si donors due to oxygen-induced multiple deep levels.     

Postoperative evaluation in mandibular prognathism treated by bilateral sagittal split osteotomy

The present study was undertaken to evaluate the postoperative relapse from the period of unwiring to 1 year postoperatively and its correlation to the amount of mandibular setback and change in vertical dimension after mandibular bilateral sagittal split osteotomy. Twenty-seven patients were evaluated cephalometrically by the time preoperatively, 6 weeks, 6 months and 1 year postoperatively. It was found that 1) the average amount of mandibular setback at pogonion point, 6 weeks postoperatively, is 7.6mm backward and 1.9mm downward, 2) the average amount of horizontal relapse at pogonion point, 6 months and 1 year postoperatively, are 1.9mm and 2.3mm respectively. 86% of the horizontal relapse, 1 year postoperatively, occurs in the first 6 months after removal of intermaxillary fixation, 3) the average amount of vertical relapse at pogonion point, 6 months and 1 year postoperatively, are 0.9mm and 1.1mm upward. 82% of the vertical relapse, 1 year postoperatively, occurs in the first 6 months after removal of intermaxillary fixation, 4) the amount of 1 year postoperatively horizontal relapse is significantly correlated both with the amount of horizontal mandibular set back and vertical downward change (r = 0.58, 0.67, p < 0.001), whereas the amount of vertical relapse is with the vertical downward change only, but horizontal setback isn't.     

管外上升R－113流体的沸腾换热试验

详细介绍了Ｒ－１１３流体管外上升流动的沸腾换热试验，包括试验台架、流量计和温度测量的修正，以及试验数据。拟合的换热关系式为ｑ＝５２８（Ｔｗ─Ｔｓ）１．３３。     

Silicon carbide-toughened zirconia ceramics

Tetragonal zirconia polycrystalline (TZP) ceramics containing SiC reinforcement in the form of fine particles (nano-scale), particles (micro-scale), whiskers and platelets were synthesized by hot-pressing. The effects of morphology and grain size of SiC reinforcement on the strength and fracture toughness at room temperature were investigated. The addition of SiC (in whatever form) caused decreases in strength and toughness at room temperature with the exception of whisker-reinforced materials. Toughness fell off with increasing temperature, but nevertheless retained about one-half of the room-temperature value for that particular SiC reinforcement. However, the whisker- and particle-reinforced materials had higher K _lc values at high temperature than fine particle- or platelet-reinforced materials, with values in excess of 7 MPa m^1/2 at 1000 °C. The microstructure was examined for SiC whisker-reinforced/TZP materials by TEM and HREM, to examine the nature of the whisker/zirconia interface.     

预应力工程中的OVM锚固体系

ＯＶＭ锚固体系是我国第一种采用二片四开式，锚碇１８６０ＭＰａ级低松弛钢绞线的预应力锚固体系。本文介绍其基本性能，与其他系列锚具的组合以及它在斜拉桥主索上的应用。     

A Ka-band circularly polarized high-gain microstrip array antenna

In this article, the development of a circularly polarized microstrip array with 28 dBic of gain at 32 GHz is presented. Two primary objectives of this development are minimizing the microstrip array's insertion loss and maintaining a reasonable frequency bandwidth (3%). The parallel/series feed technique for the array's power distribution circuit and the sequential rotation method for the element arrangement are employed to meet these objectives     

珠江口盆地(西部)早第三纪古环境分析

珠江口盆地(西部)早第三纪的古环境变迁与盆地的形成及演化紧密相关。早第三纪盆地演化经历了4个阶段。第一阶段,盆地早期拉张,以粗粒沉积物沉积为主,部分地域发育小湖盆。第二阶段,盆地稳定下沉,是富营养性湖泊的鼎盛期,形成优质湖相烃源岩。第三阶段,湖盆萎缩,煤系沼泽发育,形成湖相和煤系两类重要烃源岩。第四阶段,古湖泊消亡,海水漫进,滨浅海砂岩体发育,形成油气勘探的有利目的层。     

锥形有源条半导体光放大器增益和饱和特性分析

以行波半导体光放大器速度方程为基础，采用传输矩阵方法，对锥形结构半导体光放大器的增益和饱和特性进行理论研究。讨论了不同锥形长度，不同结构时的增益和饱和特性差异。理论研究表明，锥形结构能改善半导体光放大器的偏振灵敏度。在同一锥度下，长锥形长度能提高饱和增益，降低偏振度。在进行半导体光放大器有源条结构设计时要综合考虑锥度及锥形长度的影响，以实现结构优化 。