A comparative study on the effect of VUV radiation in plasma SiOx-coated polyimide and polypropylene films

Wettability of polyimide (PI) and polypropylene (PP) films have been improved using SiO_x-like thin layers deposited from a mixture of hexamethyldisiloxane (HMDSO) and oxygen in a microwave distributed electron cyclotron resonance plasma reactor. The films wettability evolution behaviors were evaluated through the results of contact angle measurements, atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). The plasma depositions of SiO_x thin layers in presence of VUV radiation induce a contact angle decrease to about 7° and 35° for PI and PP films, respectively. XPS data showed that such difference in wettability is attributed to the increase of hydrophilic group's proportion at the surface of coated PI films due to VUV irradiation. AFM images showed that the PI surface topography remains relatively smooth when coated in presence of VUV radiation. However, in the case of PP films, AFM images revealed the growth of irregular structure due to a substrate etching effect supported by VUV radiation. For polymers coated without VUV irradiation, the deconvolution of the C1s peaks showed a significant decrease of CO bonds for both PI and PP substrates.     

La doping effects on intergrowth Bi2WO6–Bi3TiNbO9 ferroelectrics

La doping effects on intergrowth Bi₂WO₆–Bi₃TiNbO₉ ferroelectric ceramics were studied by X-ray diffraction, electron probe microanalysis and dielectric spectroscopy. It was found that the La³⁺ distribution, ferroelectric phase transition and dielectric relaxation behavior are apparently affected by La doping. With increasing La³⁺ content, the site of dopant ion varies, the grain growth of Bi₅TiNbWO₁₅ is restrained, the Curie temperature is reduced and broadened. Furthermore, two dielectric relaxation loss peaks were observed both in temperature and frequency spectra. The calculated relaxation parameters revealed the oxygen vacancy related to the relaxation process.     

Observation of calcium aluminate inclusions at interfaces between Ca-treated,Al-killed steels and slags

The evolution of Al₂O₃-CaO inclusions on molten steel surfaces and at molten steel/slag interfaces was observed in-situ through a confocal scanning laser microscope (CSLM) equipped with a gold-image furnace. Depending on the slag chemistry, some of the initially liquid inclusions evolved into irregular Al₂O₃ or SiO₂-enriched inclusions during the separation across the interface. Inclusions were found to cluster at specific locations at the steel/slag interface. Unlike capillary-depression-driven clustering, which is observed on molten steel surfaces, a weak repulsive force opposes fluid-flow-driven clustering at the steel/slag interface. After clustering, the irregular solid inclusions were observed to agglomerate to form large aggregates. This article is based on a presentation given in the Mills Symposium entitled “Metals, Slags, Glasses: High Temperature Properties & Phenomena,” which took place at The Institute of Materials in London, England, on August 22–23, 2002.     

Phytic Acid Degradation in Complementary Foods Using Phytase Naturally Occurring in Whole Grain Cereals

Complementary foods based on cereals and legumes often contain high amounts of phytic acid, a potent inhibitor of mineral and trace element absorption. The possibility to degrade phytic acid during the production of complementary foods by using whole grain cereals as the phytase source was investigated. Whole grain rye, wheat, or buckwheat (10%) were added to cereal‐legume‐based complementary food mixtures, and phytic acid was shown to be completely degraded in a relatively short time (1.5 to 3 h) when incubated at optimal conditions for cereal phytase. The potential usefulness of the method for industrial production was demonstrated with a complementary food based on wheat and soybean.     

Necessary optimality conditions in a nonsmooth control problem with variable structure

An optimal control problem with nonsmooth performance criterion described by a system of ordinary differential equations is considered. Necessary first-order optimality conditions are obtained.     

Inclusions of carbon in ingots of silicon carbide grown by the modified Lely method

The problem of the appearance of carbon inclusions in single-crystal silicon carbide ingots grown by the modified Lely method (the so-called graphitization of the ingot) is analyzed. It is shown that the process of graphitization of the ingot is not related to a deficit of silicon in the growth cell; in contrast, it is excess of silicon at the growth surface that inhibits the ingot growth rate and gives rise to intense corrosion of the graphite fittings.     

The principles of information processing based on the numerical solution of the nonlinear heat-conduction problem. Pt. 1. The three-dimensional discrete mathematical model

A three-dimensional solution of the direct problem of heat conduction when a linear pulsed heat source acts in the plane of contact of two semibounded bodies is presented. The solution is obtained by the method of finite differences. An example of the modeling is considered. __________ Translated from Izmeritel’naya Tekhnika, No. 10, pp. 42–45, October, 2007.     

Cyclamate intake and cyclohexylamine excretion are not related to male fertility in humans

Cyclamate and its metabolite cyclohexylamine affect male fertility in high dose animal studies, but this affect has not been investigated in epidemiological studies. This paper reports the first epidemiological study designed to investigate the possibility of a relationship between cyclamate and cyclohexylamine and male fertility in humans, in which 405 cases of clinically defined infertility in men and 379 controls were surveyed. Semen evaluation, urine analysis for cyclamate and cyclohexylamine and dietary questionnaires were compared between cases and controls. No evidence was found of a significant association between cyclamate intake and male infertility; neither high cyclamate nor high cyclohexylamine excretion were associated with elevated risk. The lack of association remained after adjusting by age, area of residence, education, total energy intake and other variables. No significant correlations were observed between cyclamate intake, metabolism or excretion, and sperm count and motility. The results demonstrate no effect of cyclamate or cyclohexylamine on male fertility at the present levels of cyclamate consumption.     

Mechanical properties of iron processed by severe plastic deformation

In the present study, the mechanical properties of Fe processed via severe plastic deformation (equal-channel angular pressing (ECAP)) at room temperature were investigated for the first time. The grain size of annealed Fe, with an initial grain size of about 200 μm, was reduced drastically during ECAP. After eight passes, the grain size reaches 200 to 400 nm, as documented by means of transmission electron microscopy (TEM). The value of microhardness during pressing increases 3 times over that of the starting material after the first pass and increases slightly during subsequent pressing for higher-purity Fe. Examination of the value of microhardness after eight passes as a function of post-ECAP annealing temperature shows a transition from recovery to recrystallization, an observation that resembles the behavior reported for heavily deformed metals and alloys. The tensile and compression behaviors were examined. In tension, a drop in the engineering stress-engineering strain curve beyond maximum load was observed both in the annealed Fe and the ECAP Fe. This drop is related to the neck deformation. The fracture surface, examined by scanning electron microscopy (SEM), shows vein patterns, which is different from the dimples found on the fracture surface of annealed Fe. In compression, an initial strain-hardening region followed by a no-strain-hardening region was observed in the ECAP Fe. The yield strength in tension of the ECAP Fe was observed to be higher than that in compression. The strengthening mechanisms and softening behavior are discussed.