MODELING OF ETHANOL BIOPRODUCTION IN THREE-PHASE FLUIDIZED BED REACTORS

A time dependent and one-dimensional model is developed to analyze the performance of three-phase fluidized reactors and is applied to the fermentation of glucose to ethanol. The reactor model takes into consideration the presence of three different phases; the yeast (solid) which is continuously fluidized by the liquid stream, the gas bubbles which greatly enhance mixing and the wake phase which follows the tracks of the gas bubbles. The reactor performance is analyzed as a function of major operating conditions. The analysis includes variations in dispersion of glucose and yeast inside the reactor, the concentration of glucose in feed, and of the yeast mass inside the reactor, reaction temperature, velocities of gas and liquid feeds, and reactor aspect ratio. Computed glucose conversion is presented as a function of reactor length and time. The results indicate that high glucose conversions can be obtained at high gas velocities, low liquid flow rates, large aspect ratios, high yeast concentration, and an optimum operating temperature of 36°C,     

CO<Subscript>2</Subscript>-laser treatment of indium tin oxide nanoparticle coatings on flexible polyethyleneterephthalate substrates

A CO₂-laser treatment was used to improve the electrical conductivity of coatings of indium tin oxide (ITO) nanoparticles on flexible polyethyleneterephthalate (PET) substrates. The electrical conductivity and the transparency of CO₂-laser-treated ITO nanoparticle coatings were characterized with regard to the application as transparent electrodes. Furthermore, the stability of the electrical conductivity under oscillatory bending was investigated. A specific resistance of 0.12 Ω cm is obtained by CO₂-laser treatment without thermally damaging the PET film. The improvement of the electrical conductivity can be explained by a slight sinter neck formation. For a film thickness of 3 μm, a sheet resistance of 400 Ω/□ and a transmission in the visible range of 80% were achieved. The stability of the electrical conductivity of CO₂-laser-treated ITO nanoparticle coatings under bending was investigated using a specially constructed device for the application of various oscillatory bending loads. For a bending radius of 10 mm, the sheet resistance does not exceed 1000 Ω/□ after 300 bending cycles. Compared to commercial sputtered ITO coatings, CO₂-laser-treated ITO nanoparticle coatings show a significant higher stability under oscillatory bending.     

One‐Pot Thioetherification of Aryl Halides Using Thiourea and Alkyl Bromides Catalyzed by Copper(I) Iodide Free from Foul‐Smelling Thiols in Wet Polyethylene Glycol (PEG 200)

In this article, we have developed a new protocol for the thioarylation of structurally diverse alkyl bromides such as benzyl, cinnamyl, n‐octyl, cyclohexyl, cyclopentyl, and tert‐butyl bromides with aryl iodides, bromides and an activated chloride using thiourea catalyzed by copper(I) iodide in wet polyethylene glycol (PEG 200) as an eco‐friendly medium in the presence of potassium carbonate at 80 and 100 °C under an inert atmosphere. The process is free from foul‐smelling thiols which makes this method more practical for the thioetherification of aryl halides. Another important feature of this method is the variety of alkyl bromides which are commercially available for the in situ generation of thiolate ions with respect to the existing protocols in which the less commercially available thiols are directly used for the preparation of arylthio ethers.     

Etude de l'influence du mode d'anodisation sur la cinétique de croissance des films d'alumine en milieu acide sulfurique

The kinetics of growth of Al₂O₃ oxide films made by anode oxidation of ALuminium 1050A with two anodization techniques has been investigatedan compared. The first technique is the classical method based on continuous tension during the complete electrlysis duration, and the second one is the modern method ofpulsed tensions, whcih consists of periodically imposing to the material two anodc tensions E₁ and E₂ (E₁ > E₂) during time T₁ and T₂ until the end on anodization. We have shown that the second technique allows the fabrication of films more rapidly for the same electrolysis duraton. Energy and electrolysis time are saved, making it attractive from an economical viewpoint. This advantage arises from the positive effect of excess heat disiption gathered during the imposition of tension, E₁, when E₂ is imposed thereafter (recovery effect). The logging of in situ transient responses in the case of pulsed anodization is a significant asset to explain the growth film kinetics obtained with this method.     

Minor Intron Splicing from Basic Science to Disease

Pre-mRNA splicing is an essential step in gene expression and is catalyzed by two machineries in eukaryotes: the major (U2 type) and minor (U12 type) spliceosomes. While the majority of introns in humans are U2 type, less than 0.4% are U12 type, also known as minor introns (mi-INTs), and require a specialized spliceosome composed of U11, U12, U4atac, U5, and U6atac snRNPs. The high evolutionary conservation and apparent splicing inefficiency of U12 introns have set them apart from their major counterparts and led to speculations on the purpose for their existence. However, recent studies challenged the simple concept of mi-INTs splicing inefficiency due to low abundance of their spliceosome and confirmed their regulatory role in alternative splicing, significantly impacting the expression of their host genes. Additionally, a growing list of minor spliceosome-associated diseases with tissue-specific pathologies affirmed the importance of minor splicing as a key regulatory pathway, which when deregulated could lead to tissue-specific pathologies due to specific alterations in the expression of some minor-intron-containing genes. Consequently, uncovering how mi-INTs splicing is regulated in a tissue-specific manner would allow for better understanding of disease pathogenesis and pave the way for novel therapies, which we highlight in this review.     

Synthesis,characterization and adsorption studies of h-BN crystal for efficient removal of Cd2+ from aqueous solution

In the present study, hexagonal boron nitride (h-BN) was synthesized from boric acid and melamine by thermal annealing method in a nitrogen atmosphere. The pure h-BN was used as an efficient sorbent for the uptake of Cd²⁺ ions from the solution phase. The kinetics and sorption studies of metal ions onto the h-BN were carried out in batch adsorption experiments at different temperature, time, pH, sorbent dosage, and concentration of metal ions. The optimum pH for the removal of the Cd²⁺ ions was found to be pH 7. The effect of temperature showed that the process of Cd²⁺ sorption remained endothermic in the range of 298 K–328 K. The Lagergren's first and Ho's second kinetic models were tested to interpret the adsorption kinetic data, however the present data was explained well by Ho's model for kinetics. The thermodynamic perameters ΔG, ΔS and ΔH were determined using the available adsorption data at different temperatures. The physicochemical properties of the synthesized product were also characterized before and after adsorption by different analytical techniques like FT-IR, TGA, XRD and Point of Zero Charge (PZC). The morphology of the surface was analyzed with the help of Scanning Electron Microscopy. The h-BN proved to be an efficient adsorbent for the uptake of the Cd²⁺ ions from aqueous media.     

The advanced set-up and control system for Dofasco's tandem coldmill

The new coupled pickle line and cold mill (CPCM) has been processing steel since December 1991 at Dofasco Inc. in Hamilton, Ontario, Canada. This mill rolls both sheet and tin plate. The work rolls for the last stand are often textured by grit blasting to roll “matte” finished strip. A new computer-targeted control system was developed for the roll speeds and gaps, specifically for matte rolling. The new set-up system uses Stone's model, which is more appropriate for the limited reductions evident with the rougher rolls. Conventional automatic gauge control (AGC) systems using thickness measurements after the last stand are limited in performance by the effect of long transport delays. These limitations are particularly critical during mill acceleration and deceleration. The use of a thickness gauge before the stand with matte rolls allows the development of AGC systems using shorter control loops for final gauge control. The AGC system uses a Smith predictor for transport lag, (phase shift), and compensation. The combination of the shorter AGC loop and the Smith predictor allows higher gains to be used in the control system. This set-up and control system has contributed to Dofasco's position as a market leader in thickness performance     

ECG anomalies and axis deviations in heart transplant recipients: MRI studies]

Side effects of morphine are common when given in titrated doses to control severe pain in advanced cancer. We report a case series of acutely ill cancer patients suffering from pain, complications of advanced disease, and opioid side effects. They were treated with intravenous (i.v.) ketorolac along with i.v. morphine using repeated dosing. Excellent pain relief with improvement in the opioid bowel syndrome was achieved. We found it possible to switch from IV ketorolac to oral ketorolac along with oral morphine for long-term pain control. Ketorolac can be well tolerated in high-dose, long-term use even in this frail patient population. An algorithm is presented for the suggested use of ketorolac as a morphine sparing agent. Potential methods for studying ketorolac further in this role are discussed.     

Talbot imaging and unification

The fractional Talbot effect brings into play a superimposition of shifted and complex weightedreplicas of the original object. This phenomenon can be used to replicate images of nonperiodic objects by means of Talbot array illuminators. These diffractive elements can also be used to concentrate replicas into a single image. These techniques are useful for several applications such as beam shaping.