Microwave Demulsification in Removing Naphthenic Acids from Diesel Oil

Emulsification is an undesired phenomenon in the refining of highly acidic oil by alkali-washing electro-refining. In this article, a novel microwave method is applied for demulsification in the removing of naphthenic acid from diesel oil. The internal heating is attributed to molecular rotation and ionic conduction. The decrease of interface zeta-potential and the viscosity of diesel oil are responsible for the demulsification with microwave irradiation. The results exhibited that the demulsification rate is maximized when the optimum microwave irradiation power, exposure time, and irradiation pressure for Anshan and Liaohe diesel oil are deemed to be 375 W, 5/6 min and 0.05 MPa, respectively.     

广东省大型工程建设中天然放射性核素引起的环境问题

本文介绍了广东省境内几个大型基本建设工程项目中天然放射性核素引起的环境问题及有关治理对策，并就今后类似建设项目的辐射环境保护工作提出了建议。     

液氮制冷低气压试验箱的仿真设计

在采用液氮制冷的低气压试验箱的设计中,用常规工程设计方法计算的降温过程冷负荷过大,从而导致真空系统设计容量过大。本文采用分布参数模型对试验箱低气压条件下降温过程的冷负荷进行了精确仿真模拟,以此作为真空系统容量设计的基础,减小了设计规模,取得了良好的效果。     

会计信息失真原因及防范

虚假的会计信息,将严重扭曲股票的价值,扰乱资本市场秩序,侵害投资者的利益。笔者就会计信息失真的原因进行了分析,并就如何防范进行了探讨。     

A practical SPICE model based on the physics and characteristics of realistic single-electron transistors

A practical model for a single-electron transistor (SET) was developed based on the physical phenomena in realistic Si SETs, and implemented into a conventional circuit simulator. In the proposed model, the SET current calculated by the analytic model is combined with the parasitic MOSFET characteristics, which have been observed in many recently reported SETs formed on Si nanostructures. The SPICE simulation results were compared with the measured characteristics of the Si SETs. In terms of the bias, temperature, and size dependence of the realistic SET characteristics, an extensive comparison leads to good agreement within a reasonable level of accuracy. This result is noticeable in that a single set of model parameters was used, while considering divergent physical phenomena such as the parasitic MOSFET, the Coulomb oscillation phase shift, and the tunneling resistance modulated by the gate bias. When compared to the measured data, the accuracy of the voltage transfer characteristics of a single-electron inverter obtained from the SPICE simulation was within 15%. This new SPICE model can be applied to estimating the realistic performance of a CMOS/SET hybrid circuit or various SET logic architectures.     

Current distribution, resistance, and inductance forsuperconducting strip transmission lines

A method for the calculation of the current distribution, resistance, and inductance matrices for a system of coupled superconducting transmission lines having finite rectangular cross-section is presented. These calculations allow accurate characterization of both high-T_c and low-T _c superconducting strip transmission lines. For a single stripline geometry with finite ground planes, the current distribution, resistance, inductance, and kinetic inductance are calculated as functions of the penetration depth for various film thicknesses. These calculations are then used to determine the penetration depth for Nb, NbN, and YBa₂Cu₃O_7-x superconducting thin films from the measured temperature dependence of the resonant frequency of a stripline resonator. The calculations are also used to convert measured temperature dependence of the quality factor to the intrinsic surface resistance as a function of temperature for an Nb stripline resonator     

TiAl＋Sb合金的热稳定性的研究

研究了退火处理对Ｔｉ－３４ｗｔ．％Ａｌ－０．５ｗｔ．％Ｓｂ合金的室温抗弯性能，显微组织，相组成和断口形貌的影响。发现，低于１０００℃退火处理，ＴｉＡｌ＋Ｓｂ合金的显微组织没有变化，其力学性能仍然保持较高的值。此合金成分适应高温使用条件。     

溶胶－凝胶法制备Pb（Zr，Ti）O_3玻璃陶瓷过程中的结构变化

本文介绍溶胶－凝胶法制备均匀ＰｂＺｒ－Ｔｉ－Ｂ－Ｓｉ凝胶玻璃，并通过适当热处理在凝胶玻璃中原位生长Ｐｂ（Ｚｒ；Ｔｉ）Ｏ３微晶的新工艺·利用ＩＲ谱考察了凝胶玻璃中的元素键合结构随温度的变化．结合热分析和ＸＲＤ；ＳＥＭ技术，研究了Ｐｂ（Ｚｒ，Ｔｉ）Ｏ３微晶在凝胶玻璃中的生长过程及该材料的结构特点．发现Ｐｂ２（Ｚｒ，Ｔｉ）２Ｏ６＋ｘ立方焦绿石介稳过渡相的纳米微晶首先出现于该体系中，并在更高的温度下先后完全转变成三方和四方Ｐｂ（Ｚｒ，Ｔｉ）Ｏ３钙钛矿相．电子显微观察结果表明，该工艺制备的Ｐｈ（Ｚｒ；Ｔｉ）Ｏ３玻璃陶瓷具有均匀的细晶结构．     

PTC－BaTiO_3射频溅射用靶材的制备

研究了用于射频溅射ＰＴＣ－ＢａＴｉＯ_３薄膜的厚大靶材制备工艺，所制成的靶材的室温电阻率为８００Ω·ｃｍ，ＰＴＣ效应＞１０５，平均粒径为１～３μｍ，讨论了配方中ＴｉＯ_２品种的选择、施受主添加剂的搭配与掺量以及烧成中的升降温速率对于ＰＴＣ效应的影响     

水闸闸室化算梯形横截面上不平衡剪力的分配计算

当地弹性地基梁法计算非岩石地基的水闸底板应力时，首先要求解出不平衡剪力，当闸墩截面选择梯形时（主要是边墩），常用方法是作图法，这既有误差又繁琐。所以就此推导出一个公式，可直接求解平衡剪力。