不等波纹函数低通原型的理论及应用

本文提出不等波纹函数低通原型，并对其理论进行初步探讨。切比雪夫函数及最平坦型巴特活兹函数皆为其特例。文中给出不等波纹函数的几个性质，最后给出两个应用实例，消除耦合环自感部分的影响；抑制高次模的微带圆盘腔带通滤波器。     

用于提高国产氩离子激光器相干长度的相干扩展器

本文报导了最近研制成功的用于提高国产氩离子激光器相干长度的相干扩展器。利用这种基于F-P理论的相干扩展器可以使国产氩离子激光器的相干长度由不足5cm一下提高到m的量级,功率损耗在25%～40%之间,有着很好的应用前景。     

激光冶炼太阳级硅材料的实验研究

通过实验研究表明，大功率ＣＯ２激光器在廉价硅材料制备中应用的可能性。     

Aortic valve papillary fibroelastoma. A diagnosis by transthoracic echocardiography

Cardiac papillary fibroelastomas are unusual, frond-like growths typically found on cardiac valves, diagnosed incidentally on autopsy or cardiac surgery, but rarely during life. We report a rare case of an aortic valve papillary fibroelastoma detected by transthoracic echocardiography and confirmed by histologic study.     

Principle and applications of retroreflective vision sensing for discrete part-presentation

For flexible manufacturing of short production runs where a large variety of product sizes, component types, and surface reflectance characteristics are encountered, it is desirable to build flexible computer-controlled systems for feeding parts into machine tools or assembly processes that combine maximum flexibility and reliability with minimum cost and cycle-time. This is not a general bin-picking problem; the parts are assumed to be propositioned approximately in totes/pallets/kits with regularly spaced locations. This article presents a machine vision technique based on the principle of retroreflective vision sensing for part-presentation. Since retroreflective material has a distinctive surface reflectance that is not commonly found in natural or man-made objects, the use of retroreflective surfaces enables reliable high object-to-background contrast images to be obtained for a wide variety of objects. Unlike conventional machine vision techniques, which rely on the variance of the surface reflectance of the objects to generate detailed images, retroreflective vision sensing aims at generating a reliable two-dimensional digital object silhouettes so that the location and orientation of the part can be reliably determined. Two application examples, machine loading and assembly, are illustrated.     

一种具有带孔补偿过滤器的γ剂量计的能响补偿计算

对在低能区有过高响应的γ辐射剂量计可采用带孔补偿过滤器进行能响补偿。本文介绍了对这类补偿过滤器选择最佳补偿参数(材料厚度和孔隙率)的近似求解方法;并对 CaSO:Tm 热释光剂量计用此方法作了实例计算。文中还计算了自制带有鼠笼结构的这类补偿过滤器的 CaSO:,Tm热释光剂量计对照射量的能量响应,与实测结果比较,各能量点响应的最大相差为10%。     

Driver detection and recognition of lineside signals and signs at different approach speeds

A study was carried out using simulation to investigate driver responses to lineside signals and signs at various approach speeds. The objectives of the study were: (1) to find out whether train speed would significantly affect signal/sign reading; (2) to examine at which point certain types of signs or signals could be detected or recognised, and (3) to determine a speed cut-off level above which certain types of signs or signals are no longer recognisable or detectable. Fifty-seven train drivers from 12 Train Operating Companies in the UK participated in the trials. Twenty different types of lineside signs and ten types of signals were tested under six different approach speeds ranging from 100 to 350 km/h (62–218 mph). Driver performance measures were ‘time remaining to the signal/sign’ at the point of detection or recognition, and reading error rate. The results showed a significant influence of train speed on driver responses to lineside signals/signs and demonstrated a non-linear relationship between driver responses to signals/signs and approach speed. This has been used to estimate a maximum approach speed limit within which a specific signal or sign can be correctly detected or recognised. The findings and implications of the study are discussed in the paper.     

预处理工艺对硬质合金与金刚石膜间粘结力的影响

在两种经不同预处理的硬质合金YG8基底上，采用微波等离子体化学气相沉积法，在微波功率2kW，压强4.0kPa和6.5kPa，CH4和H2流量分别为1.6cm/s和100.0cm/s的条件下生长金刚石薄膜。利用X射线衍射检测了金刚石薄膜是否存在，用拉曼光谱分析了薄膜的质量，用金相显微镜观察了薄膜的洛氏硬度压痕，标定并比较了不同预处理工艺膜与基底的结合力。实验结果表明，不同的预处理方法对于粘结力的影响不大，最主要的因素是钴含量的多少。     

The Solutions for Adjustment and Reconstruction of Water-Drive Surface Systems in the Old Areas of Daqing Oilfield

Introduction 　　Owing to long-time running, more facilities including stations, pipelines, vessels have become corrosive and aged ,some process has grown old, it has exert more burden for the maintenance and repair.Simultaneously, the fluid production rate, oil production rate and water injection rate has changed greatly so that the inflicts and problems from the established surface systems will become more obvious. Energy cost of production and running has increasing continuously. Capacity has been unbalance in systems and areas. 　　……     

印刷质量控制的基本方法(一)综述

无论哪一种印刷品的生产都要经过若干个工艺过程，才能将原稿上的图文信息转移到承印物上。由于印刷技术的飞跃发展，标准化和质量控制成为一个很重要的问题。标准化和质量控制在很大程度上是依靠仪器和控制装置来实现的。科学技术的极大发展，大大地推动了印刷技术的发展，印刷所使用的原材料和工艺得到了很大的改进，逐步实现了标准化，提高并稳定了生产高质量产品的能力。目前我们评价印刷品质量的优劣大致有三种方法：主观评价法、客观评价法和综合评价法。主观评价法，是以原稿为基础对照样张来评价。这里有人为的因素，根据评价人的知…