Error monitoring issues for common channel signaling

Motivated by field data which showed a large number of link changeovers and incidences of link oscillations between in-service and out-of-service states in common channel signalling (CCS) networks, a number of analyses of the link error monitoring procedures in the SS7 protocol were performed by the authors. This paper summarizes the results obtained thus far and include the following: (a) results of an exact analysis of the performance of the error monitoring procedures under both random and bursty errors; (b) a demonstration that there exists a range of error rates within which the error monitoring procedures of SS7 may induce frequent changeovers and changebacks; (c) an analysis of the performance of the SS7 level-2 transmission protocol to determine the tolerable error rates within which the delay requirements can be met; (d) a demonstration that the tolerable error rate depends strongly on various link and traffic characteristics, thereby implying that a single set of error monitor parameters will not work well in all situations; and (e) some recommendations on a customizable/adaptable scheme of error monitoring with a discussion on their implementability. These issues may be particularly relevant in the presence of anticipated increases in SS7 traffic due to widespread deployment of advanced intelligent network (AIN) and personal communications service (PCS) as well as for developing procedures for high-speed SS7 links currently under consideration by standards bodies     

Resonant couplers acting as add-drop filters made withsilica-on-silicon waveguide technology

Add-drop filters are demonstrated using silica-on-silicon optical waveguide technology. This device consists of a full directional coupler subdivided by Mach-Zehnder sections. Tapering of the coupling coefficients is experimentally shown to dramatically reduce the filters' sidelobes. Only one photolithographic step is required using the silica planar waveguide technology, yielding accurate wavelength control of the filters. Excellent agreement between measurement and design was achieved     

Evaluation of absorption and emission cross sections of Er-dopedLiNbO3 for application to integrated optic amplifiers

The polarization-dependent absorption and emission spectra of the ⁴I_13/2-⁴I_15/2 transition (λ~1.5 μm) in single crystal bulk Er:LiNbO₃ have been measured. Low-temperature (10 K) measurements of the Stark split energy levels of these two manifolds indicate at least two Er³⁺ sites. McCumber theory is applied to determine the Er:LiNbO₃ absorption and emission cross sections. These values are used to calculate the gain characteristics of Er:LiNbO₃ channel waveguides. Calculations indicate that a gain of 10 dB is achievable in a waveguide of several centimeters using ~20-mW pump power     

Dynamic range of coherent analog fiber-optic links

We investigate the performance of coherent analog optical links employing amplitude modulation (AM), phase modulation (PM), and frequency modulation (FM). The performance of these coherent links is compared to that of AM direct-detection (DD) links. The signal-to-noise ratios, nonlinearities, and-spurious-free dynamic ranges (SFDR's) of the foregoing links are evaluated. We calculate the SFDR for links using DFB and Nd:YAG lasers with typical linewidths of 10 MHz and 5 kHz, respectively. The performance of PM and FM links is dominated by phase noise above a critical value of received optical power. For a linewidth of 10 MHz, and SFDR's of PM and FM links are 30 and 31 dB, respectively, for a received optical power above -27 dBm in a 1 GHz bandwidth. For a linewidth of 5 kHz, the corresponding SFDR's above a received power level of 0 dBm are 51 and 53 dB. The performance of DD and AM links is dominated by RIN above a critical value of received optical power. For a RIN level of -155 dB/Hz, the SFDR's of DD and AM links are 49 and 47 dB, respectively, for a received optical power of 10 dBm in a 1 GHz bandwidth. The SFDR's of the DD and coherent links used for transmission of subcarrier-multiplexed (SCM) signals are also derived. We evaluate target laser parameters needed by a number of different applications. For AM video and antenna remoting applications, linewidths of <1 and <3 kHz are required to use PM and FM links, respectively. For FM video, linewidths of <150 and <350 MHz are required to use PM and FM links. For SCM digital applications, linewidths of <80 and <200 MHz are required to use PM and FM links. The paper concludes with a discussion of system implementation issues, including linearization, optical frequency modulation, balanced receivers, and IF issues     

A time domain approach for avoiding crosstalk in optical blockingmultistage interconnection networks

Crosstalk in multistage interconnection networks can be avoided by ensuring that a switch is not used by two connections simultaneously, in order to support crosstalk-free communications among N inputs and N outputs, a space domain approach dilates an N×N network into one that is essentially equivalent to a 2N×2N network. Path conflicts, however may still exist in dilated networks. This paper proposes a time domain approach for avoiding crosstalk. Such an approach can be regarded as “dilating” a network in time, instead of space. More specifically, the connections that need to use the same switch are established during different time slots. This way, path conflicts are automatically avoided. The time domain dilation is useful for overcoming the limits on the network size while utilizing the high bandwidth of optical interconnects. We study the set of permutations whose crosstalk-free connections can be established in just two time slots using the time domain approach. While the space domain approach trades hardware complexity for crosstalk-free communications, the time domain approach trades time complexity. We compare the proposed time domain to the space domain approach by analyzing the tradeoffs involved in these two approaches     

P-N double quantum well resonant interband tunneling diode withpeak-to-valley current ratio of 144 at room temperature

The current-voltage characteristics of the P-N double quantum well resonant interband tunneling (RIT) diodes in InAlAs-InGaAs system have been improved in this letter. The peak-to-valley current ratio (PVCR) is as high as 144 at room temperature. As we know, this is the highest room temperature PVCR ever reported in any tunneling devices. Moreover, the influence of the central barrier thickness varying from 10 Å to 30 Å on the device characteristics is also studied     

Similarity, interactive activation, and mapping.

The question of "What makes things seem similar?" is important both for the pivotal role of similarity in theories of cognition and for an intrinsic interest in how people make comparisons. Similarity frequently involves more than listing the features of the things to be compared and comparing the lists for overlap. Often, the parts of one thing must be aligned or placed in correspondence with the parts of the other. The quantitative model with the best overall fit to human data assumes an interactive activation process whereby correspondences between the parts of compared things mutually and concurrently influence each other. An essential aspect of this model is that matching and mismatching features influence similarity more if they belong to parts that are placed in correspondence. In turn, parts are placed in correspondence if they have many features in common and if they are consistent with other developing correspondences. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Yeast sequencing reports. Isolation and sequence analysis of a gene from the linear DNA plasmid pPAC1–2 of Pichia acaciae that shows similarity to a killer toxin gene of Kluyveromyces lactis

The toxin-encoding linear plasmid systems found in Pichia acaciae and Kluyveromyces lactis yeasts appear to be quite similar, both in function and structural organization. By Southern hybridization, a linear plasmid of P. acaciae, pPac1–2, was found to hybridize to the second open reading frame (ORF2) of K. lactis plasmid pGKL1, known to encode the α and β subunits of the K. lactis toxin. A 1·7 kbp segment of pPac1–2 DNA was cloned, sequenced and shown to contain four regions of strong homology to four similarly oriented regions of K. lactis ORF2. This 1·7 kbp fragment also contained an ORF of 1473 bp that could encode a protein of ～ 55·8 kDa. Like the α subunit gene of K. lactis ORF2, a very hydrophobic region occurs at the N-terminus, perhaps representing a signal sequence for transport out of the cell. Unlike K. lactis ORF2, however, the encoded polypeptide is much smaller and lacks a recognizable domain common to chitinases. The structure of a toxin that includes the translation product of this P. acaciae ORF would likely be quite different from that of the K. lactis toxin. Analysis of the upstream region of the P. acaciae ORF revealed an upstream conserved sequence identical to that found before ORFs 8 and 9 of pGKL2. A possible hairpin loop structure, as has been described for each of the four K. lactis pGKL1 ORFs, was found just upstream of the presumed start codon. The similarity of the promoter-like elements found in the linear plasmid genes of these diverse yeasts reinforces the idea of the existence of a unique, but highly conserved, expression system for these novel plasmids. The sequence has been deposited in the GenBank data library under Accession Number U02596.