拉伸速率对PP/GB复合材料力学性能的影响

应用Instron材料试验机考察了室温下拉伸速率对玻璃微珠填充聚丙烯复合材料的弹性模量和屈服强度的影响，结果表明，随着微珠含量的增加，试样的弹性模量（Ec）增大，且与拉伸应变速率呈近乎幂律函数关系，而屈服强度（бyc）则随着微珠体积分数（Φf）的增加呈线性函数形式下降，并随着拉伸应变速率的增加呈幂律函数形式提高，此外，讨论了Ec、Φf与бyc三者之间的关系。     

对氧化物熔体浮区中重力对流的数值模拟

利用有限元分析方法数值模拟了界面形状对氧化物高温熔体碟形浮区中的温度分布和重力对流速率的影响，发现界面形状对重力对流速率有较大的影响，对于凸面，相对于炉圈平面5％的偏离使重力对流速率增大25％，偏离越大，重力对流速度越大，对于凹面，5％的偏离使重力对流速率减小15．7％，偏离越大，重力对流速度越小。     

现场总线技术在发电系统数据采集中的应用

介绍了现场总线网络在干熄焦汽轮机发电生产过程中所起的作用，并重点介绍了系统所完成的数据采集，监视和管理等功能。     

横流均匀环境中三维线源型正负浮力射流特性研究

本文利用混合有限分析法及交错网格。对横流均匀环境中三维线源型正负浮力射流及负浮力射流的特性进行研究，分析了不同工况下流速，温度和湍动能在断面上的分布及影响射流轨迹线的因素，讨论了轨迹线上温度的变化及浮力射流的贴壁现象。对三维长线源型负浮力射流，分析了流速比，喷口弗汝德数对负浮力射流的影响。     

Particle characteristics of a stable fluidized bed aerosol generator

An aerosol generator consisting of a vibrating system for feeding dust into a fluidized bed was developed and tested to determine its dust output characteristics. The dust feed unit can produce 0–40 g min⁻¹ of coal dust and shows constant output up to 3 h operation durations. These correspond to mass concentrations of 0–101 g m⁻³ of coal particles for an air flowrate of 395 l min⁻¹ through the aerosol generator. The aerosolized coal particles show constant particle size distribution with time for up to h of testing under varied operation parameters. The normalized particle size distribution remains almost identical for a given feed material for a range of dust loadings. The time required to reach steady state aerosol generation is negligible for the sizes of coal particles used in this investigation.     

宝山水电站坝区配电的选型及应用

本文通过ZWB组合式变电站在黑龙江省宝山水电站工程中的应用,论述了在坝区配电中选用组合式变电站的作用和必要性,并简要介绍了宝山电站组合式变电站的选型要点。     

Rapid determination of chlorophylls in vegetable oils by laser-based fluorometry

The presence of chlorophylls in vegetable oils is considered undesirable due to their adverse effects on oxidative deterioration, bleachability and hydrogenation. The usual methods for determination of chlorophylls in vegetable oils are absorption spectrophotometry, fluorometry and liquid chromatography using fluorescence detectors. This paper outlines a fluorometric method using a laser as the excitation source. The chlorophylls in crude palm oil, rapeseed oil, soya bean oil and olive oil were determined directly by laser-based fluorometry using (a) a helium-neon laser (632-8 nm, 5 mW) as the excitation source and an optical-multichannel analyser (OMA) with an intensified diode array as the detector, and (b) a helium-neon laser and a photomultiplier tube as the detector. The method is especially suitable for the detection of chlorophylls in crude palm oil since no pre-extraction step is required. The levels of chlorophylls measured in vegetable oils using the laser technique was also compared against values obtained by conventional spectrophotometric methods. The simplicity and rapid quantification of laser based fluorometry suggest that this technique can be readily applied to the detection or a wide variety of fluorescing species in vegetable oils.     

液氮温区同轴脉冲管制冷机的实验研究

脉冲管制冷机冷头朝上布置可以使制冷机与超导器件的耦合更方便 ,但对G -M型脉冲管制冷机 ,重力会对这种布置方式产生不利影响。对双向进气型脉冲管制冷机 ,直流和耦合传热会共同影响脉冲管制冷机的性能。介绍了液氮温区G -M型同轴脉冲管制冷机的实验结果 ,主要研究了蓄冷器温度分布和重力对脉冲管制冷机性能的影响     

超声变幅杆解析法设计的可靠性研究

本文提出了用有限元法验证变幅杆解析法设计的可靠性，对三种类型的变幅杆先作解析法设计；然后利用有限元分析软件ANSYS进行模态分析，确定了变幅杆的固有频率，计算了固有频率与工作频率之间的相对误差，以此来评价解析法设计的可靠性；并分析了影响解析法设计可靠性的两个基本因素。     

南洲水厂自动化综合监控系统

介绍了南洲水厂自动化控制系统的结构及组成，以及设计考虑的主要问题。针对系统规模大、监控点数多、控制复杂等特点，在传统DCS系统三层结构上进行扩展，采用最新的企业级分布式监控解决方案，应用多种通讯技术，揉合多种工业总线，解决了固定和移动设备、远程站点的卖时监控问题，实现了不同设备、不同子系统之间的数据交换，是真正意义上的一体化控制。