Chemical characterization of fruit and fungal volatiles attractive to dried-fruit beetle,Carpophilus hemipterus (L.) (Coleoptera: Nitidulidae)

The chemical basis underlying orientation to fruit and fungal odors was investigated for the dried-fruit beetle,Carpophilus hemipterus (L.). In wind-tunnel bioassays of walking and flight response from 1.8 m, beetles were attracted to odors of the yeastSaccharomyces cerevisiae on agar, aseptic banana, or banana inoculated withS. cerevisiae, although both banana substrates elicited greater response than the yeast alone. When presented in a two-choice bioassay, the yeast-inoculated banana attracted approximately twice as many beetles as did the aseptic banana. GC-MS analysis of the headspace volatiles above these odor sources revealed a somewhat more complex and concentrated volatile profile for yeast-inoculated banana than for aseptic banana. The odor from yeast on agar had fewer components, and these were present at lower concentrations than the odors of either banana substrate. By blending mineral-oil or aqueous solutions of the 18 components of inoculated-banana odor in varying concentrations, it was possible to mimic closely the headspace profile of the natural odor. This synthetic odor also elicited beetle attraction in the wind tunnel at levels comparable to the inoculated banana. Through a series of bioassays in which individual components were subtracted from or added to a synthetic odor blend, it was determined that ethyl acetate, acetaldehyde, 2-pentanol, and 3-methylbutanol comprised the simplest blend of compounds evoking full behavioral response. However, 2-methylpropanol or butanol were apparently interchangeable with 3-methylbutanol in this blend, and comparable response could also be elicited by replacing acetaldehyde with a combination of both 2-pentanone and 3-hydroxy-2-butanone. Thus, our results suggest that this generalist insect herbivore locates its hosts by a long-range response to a variety of blends of common fruit volatiles, whose concentrations are enhanced by fungi.     

Aggregation pheromone characterization and comparison inDrosophila ananassae andDrosophila bipectinata

(Z)-11-Octadecenyl acetate (Z11–18Ac) and (Z)-11-eicosenyl acetate (Z11–20Ac) were identified as the aggregation pheromones ofDrosophila ananassae, andZ11–20Ac was identified as the aggregation pheromone ofDrosophila bipectinata. Z11–18Ac andZ11–20Ac were not attractive alone; however, in combination with fermenting food odors, the acetates attracted flies of both sexes in a wind-tunnel olfactometer. The pheromones were present in the ejaculatory bulb of sexually mature male flies and transferred to the female during mating. MaleD. bipectinata released little if anyZ11–20Ac to the food; however, recently mated females releasedZ11–20Ac to the surrounding surfaces in just a few hours after mating.D. ananassae males, on the other hand, appeared to release moreZ11–18Ac andZ11–20Ac to the surroundings than mated females. AlthoughD. bipectinata males had noZ11–18Ac, flies were as attracted toZ11–18Ac as to an equal quantity ofZ11–20Ac.D. ananassae were attracted toZ11–18Ac but not toZ11–16Ac orZ11–20Ac. However,Z11–20Ac in combination withZ11–18Ac was significantly more attractive thanZ11–18Ac alone.     

Incidence and severity of Arcanobacterium pyogenes injection site abscesses with needle or needle-free injection

Nursery-age pigs (n=198) were used to evaluate the difference in abscess formation at needle-free jet and conventional needle-and-syringe injection sites. Needle-free jet injection was used to administer injections in the neck and ham on one side of the animal whereas needle-and-syringe was used for neck and ham injections on the opposite side. Immediately prior to injection, the injection site surfaces were contaminated with an inoculum of Arcanobacterium pyogenes. Each pig was humanely euthanized 27 or 28days after injections. Histopathological results showed that needle-free jet injection was associated with more abscesses than needle-and-syringe injection at both neck (P=0.0625) and ham (P=0.0313) injection sites. Out of 792 injection sites, only 13 abscesses were observed, with 12 of those present at needle-free jet injection sites. Needle-free jet injection may increase the occurrence of injection site abscesses that necessitate carcass trimming at pork processing plants.     

Quantitative and temporal analysis of effects of twospotted spider mite (acari: Tetranychidae) female sex pheromone on male guarding behavior

Responses of male twospotted spider mite,Tetranychus urticae (Koch), to female sex pheromone were described by a glass slide bioassay and computerized pathway digitizer. Pheromone was extracted from quiescent deutonymphs and fractionated by HPLC, and responses of guarding males to each fraction, all fractions combined, unfractionated extract, and a hexane control were bioassayed for 6 min. Mean angular velocities, linear velocities, percent time stationary, and distance from the 3-mm-diameter treatment circle were calculated for each mite at 20-sec intervals and these behavioral parameters regressed on time. Analysis of variance of regression-equation intercepts showed that no differences in initial male angular velocities were observed among treatments, but initial linear velocities were greater in response to all fractions combined and to extract than to individual fractions, and greater in response to individual fractions than to the control. Angular velocities decreased and linear velocities increased more rapidly in response to individual fractions than to all fractions combined and extract, while males turned preferentially in one direction and were stationary (no displacement) more often in response to all-fraction combinations than to individual fractions and the control. Significant differences were observed among the parameter values elicited by individual fractions, suggesting that active fractions differed qualitatively. The described changes in movement parameters show that maleT. urticae response to presence of pheromone occurs almost immediately, and that multiple pheromonal components are necessary to elicit maximum male response. The overall effect of pheromonal components was to decrease the rate at which males moved away from the treatment cycle, thereby causing male arrestment.     

Quantitation of vitamin K in human milk

A quantitative method was developed for the assay of vitamin K in human colostrum and milk. The procedure combines preparative and analytical chromatography on silica gel in a nitrogen atmosphere followed by reversed phase high performance liquid chromatography (HPLC). Two HPLC steps were used: gradient separation with ultraviolet (UV) detection followed by isocratic separation detected electrochemically. Due to co-migrating impurities, UV detection alone is insufficient for identification of vitamin K. Exogenous vitamin K was shown to equilibrate with endogenous vitamin K in the samples. A statistical method was incorporated to control for experimental variability. Vitamin K₁ was analyzed in 16 pooled milk samples from 7 donors and in individual samples from 15 donors at 1 month post-partrum. Vitamin K₁ was present at 2.94±1.94 and 3.15±2.87 ng/mL in pools and in individuals, respectively. Menaquinones, the bacterial form of the vitamin, were not detected. The significance of experimental variation to studies of vitamin K in individuals is discussed.     

Degradation of Nextel™ 610‐based oxide‐oxide ceramic composites by aluminum oxychloride decomposition products

Nextel? 610 alumina fibers and alumina‐YAG (yttrium‐aluminum garnet) matrices were used to make oxide‐oxide ceramic matrix composites (CMCs) with and without monazite (LaPO₄) fiber‐matrix interfaces. Twelve sequential aluminum oxychloride (AlOCl) infiltrations with 1 hour heat treatments at 1100°C and a final 1 hour heat treatment at 1200°C were used for matrix densification. This matrix processing sequence severely degraded CMC mechanical properties. CMC tensile strengths and interlaminar tensile (ILT) strengths were less than 10 MPa and 1 MPa, respectively. Axial fracture of Nextel? 610 fibers was observed after ILT testing, highlighting the extreme degradation of fiber strength. Extensive characterization was done to attempt to determine the responsible degradation mechanisms. Changes in Nextel? 610 fiber microstructure after CMC processing were characterized by optical microscopy, SEM, and extensively by TEM. In AlOCl degraded fibers, grain boundaries near the fiber surface were wetted with a glass that contained Y₂O₃/SiO₂ or Y₂O₃/La₂O₃/P₂O₅/SiO₂, and near‐surface pores were partially filled with Al₂O₃. This glass must also contain some Al₂O₃ and initially some chlorine. AlOCl decomposition products were predicted using the FactSage^® Thermochemical code, and were characterized by mass spectrometry. Effects of AlOCl precursors on monazite coated and uncoated Nextel? 610 fibers tow and filament strength were evaluated. A mechanism for the severe degradation of the oxide‐oxide CMCs and Nextel? 610 fibers that involves subcritical crack growth promoted by release of chlorine containing species during breakdown of intergranular glasses in an anhydrous environment is proposed.     

Bioceramics

Ceramics used for the repair and reconstruction of diseased or damaged parts of the musculo-skeletal system, termed bioceramics, may be bioinert (e.g., alumina and zirconia), resorbable (e.g., tricalcium phosphate), bioactive (e.g., hydroxyapatite, bioactive glasses, and glass-ceramics), or porous for tissue ingrowth (e.g., hydroxyapatite-coated metals). Applications include replacements for hips, knees, teeth, tendons, and ligaments and repair for periodontal disease, maxillofacial reconstruction, augmentation and stabilization of the jaw bone, spinal fusion, and bone repair after tumor surgery. Pyrolytic carbon coatings are thromboresistant and are used for prosthetic heart valves. The mechanisms of tissue bonding to bioactive ceramics have resulted in the molecular design of bioceramics for interfacial bonding with hard and soft tissue. Bioactive composites are being developed with high toughness and elastic modulus that match with bone. Therapeutic treatment of cancer has been achieved by localized delivery of radioactive isotopes via glass beads. Clinical success of bioceramics has led to a remarkable advance in the quality of life for millions of people.     

Detecting and ordering salient regions

We describe an ensemble approach to learning salient regions from arbitrarily partitioned data. The partitioning comes from the distributed processing requirements of large-scale simulations. The volume of the data is such that classifiers can train only on data local to a given partition. Since the data partition reflects the needs of the simulation, the class statistics can vary from partition to partition. Some classes will likely be missing from some or even most partitions. We combine a fast ensemble learning algorithm with scaled probabilistic majority voting in order to learn an accurate classifier from such data. Since some simulations are difficult to model without a considerable number of false positive errors, and since we are essentially building a search engine for simulation data, we order predicted regions to increase the likelihood that most of the top-ranked predictions are correct (salient). Results from simulation runs of a canister being torn and from a casing being dropped show that regions of interest are successfully identified in spite of the class imbalance in the individual training sets. Lift curve analysis shows that the use of data driven ordering methods provides a statistically significant improvement over the use of the default, natural time step ordering. Significant time is saved for the end user by allowing an improved focus on areas of interest without the need to conventionally search all of the data.