油田联合站油水分离的模糊-PID控制

联合站油水分离过程是将高含水原油处理成为合格产品的重要生产过程，从控制理论角度看，此过程具有多变量、干扰因素复杂、非线性、大滞后、压力与界面强耦合的特点，为了实现此过程的自动控制，本文针对典型的两段式脱水工艺进行了理论分析，通过对人工智能控制经验的总结，确定了模糊-PID控制策略。     

Improvement of Microwave Loss Tangent and Tunability of Ba0.55Sr0.45TiO3/MgO Composites Using the Heterogeneous Precipitation Method

Ba_0.55Sr_0.45TiO₃/MgO composites were successfully prepared by the heterogeneous precipitation method and their structural, surface morphological, tunable properties, and dielectric properties at microwave frequency were systemically investigated. Compared with the sample prepared by the traditional solid-state method, the sample prepared by the heterogeneous precipitation method exhibits a smaller grain size, more uniform microstructure, higher tunability, and lower microwave loss, and these properties are very beneficial to the development of the microwave tunable devices application. Moreover, the effects of La₂O₃ doping on the dielectric and tunable properties of BST/MgO composites are investigated. The result shows that the La³⁺-doped sample has higher tunability and lower microwave loss than the undoped one.     

Parametrized Maximum Principle Preserving Flux Limiters for High Order Schemes Solving Multi-Dimensional Scalar Hyperbolic Conservation Laws

In this paper, we will extend the strict maximum principle preserving flux limiting technique developed for one dimensional scalar hyperbolic conservation laws to the two-dimensional scalar problems. The parametrized flux limiters and their determination from decoupling maximum principle preserving constraint is presented in a compact way for two-dimensional problems. With the compact fashion that the decoupling is carried out, the technique can be easily applied to high order finite difference and finite volume schemes for multi-dimensional scalar hyperbolic problems. For the two-dimensional problem, the successively defined flux limiters are developed for the multi-stage total-variation-diminishing Runge–Kutta time-discretization to improve the efficiency of computation. The high order schemes with successive flux limiters provide high order approximation and maintain strict maximum principle with mild Courant-Friedrichs-Lewy constraint. Two dimensional numerical evidence is given to demonstrate the capability of the proposed approach.     

PPS的共混改性

简要介绍了聚苯硫醚(PPS)与其他聚合物进行共混改性的研究进展。着重讨论了PPS PA66、PPS PC、PPS PPO等的共混及其性能。此外,展望了PPS合金的发展前景。     

应用WCA微扰理论推算非极性液体比热容的新方法

本文首次将统计热力学的Ｗｅｅｋｓ－Ｃｈａｎｄｌｅｒ－Ａｎｄｅｒｓｏｎ（简称ＷＣＡ）微扰理论应用于非极性液体定容比热容和定压比热容的推算，用一些液体的ｐ－ｖ－Ｔ实验数据拟合了理论中所用ＬＪ势能函数的势能参数，并提出一个通用关联式。本文方法具有通用性，在编制的计算程序中只需输入物质的临界温度、临界比容、偏心因子等就能算出相应的比热容，工程应用十分方便。     

Fabrication and amplification of Rhodamine B‐doped step‐index polymer optical fiber

A step‐index polymer optical fiber (SI POF) containing Rhodamine B in poly(methyl methacrylate) (PMMA) has been fabricated by a preform technique. Fluorescence of different fiber lengths were observed and discussed. A high gain (23 dB) for a SI POF with 60‐cm length, 400‐μm diameter was obtained. The Rhodamine B content of the doped SI POF is 5 ppm‐wt. The signal wavelength providing the highest gain for a 60 cm SI POF is around 630 nm, and the optimum fiber length is about 60 cm at 10 kW launched pump power. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 681–685, 2004     

纤维素科学与技术研究进展

本文综述纤维素科学与技术的研究进展。阐述了纤维素结构、纤维素的合成、纤维素液晶、功能纤维素、纤维素溶剂、纤维素裂解和纤维素的废物利用等的最新动态。     

Dynamic response of Ti3SiC2 under shock compression up to 112 GPa

Ti₃SiC₂ is of interest due to its unique dual nature reminiscent of both brittle ceramics and ductile metals at ambient conditions. In this work, plate-impact experiments have been performed to study the dynamic behavior of Ti₃SiC₂ under shock compression up to 112 GPa by using laser velocity interferometer and electric pin techniques. Hugoniot elastic limits (HEL), spall strength, and Hugoniot equations of state have been obtained based on measured particle velocity profiles and shock wave velocities. The ratio of spall strength to HEL for Ti₃SiC₂ is larger than brittle ceramics but smaller than metals. This result indicates that the dual nature of Ti₃SiC₂ remains at least up to 10 GPa. On the other hand, the linearity of the Hugoniot equation of state, $D=6.9\text{0}1(22)+1.153(53)u_{\text{p}}$, suggests that the initial structure of Ti₃SiC₂ should be stable up to 112 GPa, in contrast to the result reported by Jordan et al. [J. Appl. Phys., 93 (2003) 9639].     

复合泡沫塑料的性能改进研究

为改善复合泡沫塑料的介电性能,采用金属氧化物粒子填充改性双马来酰亚胺空芯玻璃微球复合泡沫塑料得到了高介电常数、低介质损耗因数、低密度、力学性能良好的电介质材料。     

When smart grid meets PHEVs: a smart load distribution mechanism in smart grid

Along with the increasing popularity of electric vehicles caused by economic and environmental incentives, the penetration of plug-in hybrid electric vehicles (PHEVs) poses a great threat to the power grid, especially to the aggregated load in the power system. Motivated by this observation, in this paper, we analyze the impact of large-scale usage of PHEVs and address the load distribution problem by solving a decentralized optimization problem and smoothening the peak load with pricing strategies in the power grid. We also investigate the influence of charging time and charging mode on load distribution, as the charging price varies with the changes of these two factors. Our simulation study on PJM’s data warehouse shows that the proposed strategies can well smooth the peak load by pricing on the charging time and mode. The results also indicate that our strategies always distribute the load in a smoother manner at a smaller load fluctuation compared with other schemes (e.g., First Come First Service and PMCS) and thus improving the stability and reliability of the power grid.