Ozonation of CI Reactive Black 5 using rotating packed bed and stirred tank reactor

This study investigates the ozonation of CI Reactive Black 5 (RB5) by using the rotating packed bed (RPB) and completely stirred tank reactor (CSTR) as ozone contactors. The RPB, which provides high gravitational force by adjusting the rotational speed, was employed as a novel ozone contactor. The same ozone dosage was separately introduced into either the RPB or the CSTR for the investigation, while the experimental solution was continuously circulated within the apparatus consisting of the RPB and CSTR. The decolorization and mineralization efficiencies of RB5 in the course of ozonation are compared for these two methods. Moreover, the dissolved and off‐gas ozone concentrations were simultaneously monitored for the further analysis. As a result, the ozone mass transfer rate per unit volume of the RPB was significantly higher because of its higher mass transfer coefficient and gas–liquid concentration driving force. Furthermore, ozonation kinetics was found to be independent of the gravitational magnitude of an ozone gas–liquid contactor. Therefore, the results suggest employing RPBs as ozone‐contacting devices with the advantage of volume reduction. The experimental results, which can be used for further modeling of the ozonation process in the RPB, also show the requirement of correct design for the RPB. Consequently, the present study is useful for the understanding of practical application of RPBs. Copyright © 2004 Society of Chemical Industry     

Physical and dosimetric aspects of a multileaf collimation system used in the dynamic mode for implementing intensity modulated radiotherapy

The use of a multileaf collimator in the dynamic mode to perform intensity modulated radiotherapy became a reality at our institution in 1995. Unlike treatment with static fields using a multileaf collimator, there are significant dosimetric issues which must be assessed before dynamic therapy can be implemented. We have performed a series of calculations and measurements to quantify head scatter for small fields, collimator transmission, and the transmission through rounded leaf ends. If not accounted for, these factors affect the delivered dose to the prostate by 5%-20% for a typical plan. Data obtained with ion chambers and radiographic film are presented for both 6 and 15 MV x-ray beams. The impact on the delivered dose of the mechanical accuracy of the multileaf collimator, achieved during leaf position calibration and maintained during dose delivery, is also discussed.     

Multimode parameter extraction for multiconductor transmissionlines via single-pass FDTD and signal-processing techniques

We present two approaches to extract the broadband multimode parameters of guided wave structures from a single-pass finite-difference time-domain (FDTD) simulation. They include a two-dimensional (2-D) Fourier transform (FT) algorithm and a super-resolution estimation of signal parameters via rotational invariance technique (ESPRIT) algorithm. Comparison is made to show the superiority of the super-resolution approach. As a typical application, a three-line coupled microstrip structure is studied. After a single-pass FDTD simulation, broadband multimode parameters such as propagation constants, modal-field templates, and modal impedances are extracted and verified against published data obtained by the spectral-domain method. The main feature of this parameter-extraction methodology is that it decouples the computational electromagnetics engine (in this case, the FDTD simulator) from the post-processing parameter-extraction algorithm, thus providing more flexibility and connectivity among the various simulation tools     

GIS技术与微机制图

地理信息系统（ＧＩＳ）随着信息社会的发展愈发显示出强大的生命力。本文简要叙述ＧＩＳ的重要作用及其发展进程中涌出出来的四个设计模型，总结了运用ＧＩＳ国产软件平台ＭＡＰＧＩＳ制作遥感地质构造解译图的工作步骤和技术方法。     

低合金高强度钢的微观组织和疲劳裂纹扩展行为

用透射电镜观察了３０ＣｒＭｎＳｉＮｉ２Ａ钢等温的微观组织，疲劳裂纹扩展行为、裂纹尖端塑性区和位错结构，结果表明，等温状态组织由马氏体和贝氏体组成。在一个奥氏体晶粒内一般存在四个板条领域、裂纹尖端的塑性区内存在主位错带，疲劳断裂的基本组织单元为板条晶或板条束。裂纹遇到板条束界时方向发生较大偏斜。     

虚拟企业图纸数据传输

图纸数据是企业间合作需交换的一种重要的信息。本文分析了虚拟企业环境下企业之间交换图纸数据的要求，提出了一种具体的解决方案，并给出实例。     

聚碳硅烷的分子量分布与可纺性研究

阐述了聚碳烷的合成及其分子量分布，讨论了高低分子含量对聚碳硅烷熔点及可纺性的影响，而且提出了分子量分布的控制标准与方法。     

具有PDEB LB膜的声表面波湿度传感器

介绍一种新型聚炔离子导体湿敏材料－聚对二炔苯的Ｌａｎｇｍｕｉｒ－Ｂｏｌｄｇｅｔｔ成膜原理与制备，淀积有１０层ＰＤＥＢ ＬＢ膜层的声表面波延迟线型湿度传感器的特性。由于ＬＢ成膜技术拉制的膜可以在分子水平上进行定量控制，保证了膜的均匀性和一致性。     

实现多层混合刻蚀薄膜大面积均匀的方法浅探

采用多层光刻工艺结合氩离子铣的混合刻蚀方法，刻蚀高Ｔｃ超导ＹＢａＣｕＯ／ＺｒＯ２（１００）薄膜图形，取得了较好的结果。在进行氩离子镜的工艺步骤中，使用普通氩离子铣设备（离子束斑极不均匀），但采取了一定的措施─－使被刻样品在刻蚀台座上可移动，模糊地实现了薄膜的相对＂大面积＂（直径φ≥２０ｍｍ）均匀刻蚀─－可同时刻蚀２～３片６ｍｍ×１０ｍｍ薄膜，并且被刻蚀部分表面起伏约在１０ｎｍ左右。图形样品的最小线条达２μｍ，其Ｔｃ、Ｊｃ人与刻蚀前薄膜的Ｔｃ、Ｊｃ相当，即：ＴＣ为８５～９０Ｋ，Ｊｃ～１０６Ａ／ｃｍ２（在７７Ｋ下）。