A NEW BATO COMPLEX^99mTcCl（4—MCDO）3MeB FOR MYOCARDIAL IMAGING

A new nertral complex,^99mTcCl(4-MCDO)3MEB,((Bis[4-methyl-1,2-cyclohex-anedionedioximato(1-)-O]-[4-methyl-1,2-cyclohexanedione-dioximato(2-)-O] methyl-borato(2-)-N,N‘,N″,N‘‘‘,N‘‘‘‘0-chlorotechnetium,generally called BATO(Boronic acid adducts of technitium dioximes),has been synthesized and evaluated for potential use in myocardial perfusion imaging,It has intrinsic affinity for the blood clearance.The uptake of heart.lung and blood in mice at 2min separately are 1.12,2.48 and 6.66%ID.The complex formation is rapid,simple and highly yielded(≥93%).This process is easy to kit formation.     

Use of research methods of metal physics in determining the nature of defects on the surface of strips of automobile sheet steels

Translated from Metallurg, Vol. 39, No. 3, pp. 18–19, March, 1995.     

用过期“双迫”发射药改制射钉枪药的研究

文章分析了将过期“双迫”药改制成射钉枪药的可行性．实验表明,改制可采用球形药工艺,制品能满足射钉枪的使用要求．     

考虑EV充放电意愿的园区综合能源系统双层优化调度

随着电动汽车的普及度越来越高,工业园区的电动汽车用户日益增多,其充放电行为对园区综合能源系统规划和运行带来极大挑战。本文提出了考虑电动汽车充放电意愿的园区综合能源系统双层优化调度。首先基于动态实时电价、电池荷电量、电池损耗补偿、额外参与激励等因素建立充放电意愿模型,在此基础上得到改进的电动汽车充放电模型;然后,以园区综合能源系统总成本最小和电动汽车充电费用最小为目标建立双层优化调度模型,通过KKT条件将内层模型转化为外层模型的约束条件,从而快速稳定的实现单层模型的求解;最后,进行仿真求解,设置3种不同场景,对比了所提模型与一般充放电意愿模型,验证了文中所提引入EV充放电意愿模型的园区综合能源系统双层优化调度的有效性和可行性,具有一定的经济效益。     

考虑天然气混氢的园区综合能源系统电制氢优化配置

电制氢和天然气混氢技术在促进可再生能源消纳、降低系统碳排放量方面具有良好的理论研究和工程应用前景。面向含高比例可再生能源的园区综合能源系统,提出一种计及天然气混氢及跨季节存储的电制氢优化配置方法。首先梳理了含氢园区综合能源系统的运行框架和能量流动关系,建立园区内部能源生产、转换与存储设备的数学模型,其次以设备的年化投资成本、园区综合能源系统的年度运行成本和碳交易成本最优为目标,提出电制氢优化配置模型。最后通过算例分析表明电制氢及天然气混氢技术的引入可提升可再生能源的消纳能力,降低系统的整体经济成本和碳排放量,并分析了电解槽投资成本、混氢体积分数上限以及经济性和低碳性成本权重系数变化对规划运行结果的影响。关键词：园区综合能源系统;电制氢;天然气混氢;碳交易;跨季节储氢;优化配置 中图分类号：TM732     

过敏原肌质钙结合蛋白在毕赤酵母中的表达、优化及免疫反应性研究

目的 探究天然肌质钙结合蛋白(sarcoplasmic calcium binding protein, SCP)的可替代物,为蟹类过敏原的检测提供基础材料,本研究首次利用毕赤酵母(Pichia pastoris, P. pastoris)高效表达表达三疣梭子蟹(Portunus trituberculatus)重要过敏原SCP,并检验其免疫反应性。方法 根据毕赤酵母的密码子偏好性优化SCP基因并构建重组质粒。将其热激转化至P. pastoris GS115菌株后经遗传霉素(Geneticin, G418)筛选获得阳性高拷贝子。最后通过甲醇诱导表达重组SCP并结合免疫印记(Western blotting, WB)和间接酶联免疫吸附实验(enzyme-linked immunosorbent assay, ELISA)验证其免疫反应性。结果 SCP在P. pastoris GS115中实现了可溶性高效表达,其表观分子量约为28 kDa。在摇瓶水平下,最佳诱导条件为pH为6.0、每24 h添加1.0%(v/v)甲醇,于28℃发酵144 h,在此条件下,纯度为91.6%的SCP产量可达15 mg/L。WB和间接ELISA结果表明,重组SCP具有IgG结合能力。结论 毕赤酵母表达系统可以得到纯度较高且免疫反应性良好的重组SCP。本研究为SCP的理化研究及产业化应用奠定了基础,并有望促进特异性甲壳类过敏原检测的发展。     

低温等离子体处理模式对冷藏南美白对虾中假单胞菌的抑菌效果及机理研究

摘 要：目的 探究低温等离子体(cold plasma, CP)处理模式对冷藏南美白对虾中常见荧光假单胞菌(Pseudomonas fluorescens)的抑菌效果及其作用机制。方法 通过CP直接处理和循环处理P. fluorescens,研究了两种处理模式下臭氧含量动态变化对P. fluorescens的生长曲线、细胞活力,生物膜形成、细胞壁、细胞膜完整性和南美白对虾菌落总数及假单胞菌数等指标的影响。结果 两种处理模式在CP处理3 min或3 cycles后,包装内臭氧含量达到最高值,分别为(850±10) mg/m3和(874±20) mg/m3。CP循环处理模式使得臭氧含量随处理循环数递增,因此获得更长的臭氧存在时间从而具有更大的抑菌能力。P. fluorescens生长曲线表明CP处理使得菌体延迟期变长且对数生长期推迟。此外,CP处理后的P. fluorescens细胞活力显著下降(P<0.05),CP-1 min,CP-3 min和CP-3 cycles组的细胞活力分别为33.03%、5.90%和4.82%。同时相比CP-3 min组,CP-3 cycles组的P. fluorescens生物膜OD值下降27.61%。碱性磷酸酶(alkaline phosphatase, AKP)活性和核酸蛋白泄漏量结果表明,细胞壁和细胞膜完整性受损可能是P. fluorescens失活的直接原因。对虾保鲜测试结果证实,贮藏第6 d,CP-3 cycles组虾体中的菌落总数和假单胞菌数相比CP-3 min组分别降低了58.02%和79.54%。结论 CP循环处理模式通过延长对臭氧与对虾的暴露时间,提高了对P. fluorescens的灭活效果,同时还具有更优越的保鲜能力。本研究为开发基于CP技术的新型保鲜技术应用提供了理论参考。 关键词：低温等离子体;荧光假单胞菌;抑菌机制;保鲜     

Tuning the band gap of the CIGS solar buffer layer Cd1-xZnxS (x=0—1) to achieve high efficiency

To evaluate the impact of zinc sulfate (ZnSO4) concentration on the structural properties of the films, Cd1-xZnxS thin films were formed on glass substrates using chemical bath deposition (CBD) in this study. The effect of ZnSO4 precursor concentration on the surface morphology, optical properties, and morphological structure of the Cd1-xZnxS films was investigated. To study the impact of zinc doping content on the performance metrics of Cu(In1-xGax)Se2 (CIGS) cells in the experimental group and to improve the buffer layer thickness, simulations were run using one-dimensional solar cell capacitance simulator (SCAPS-1D) software.     

Research on wind turbine blade damage based on pre-stressed FBG strain sensors

One of the essential parts of a wind power generator that captures wind energy is the wind turbine blade. The safety of the blades rapidly declines as a wind turbine''s operating period grows. For real-time monitoring, a chip-type pre-stressed fiber Bragg grating (FBG) strain sensor was fabricated. The sensor''s structure was improved using simulation analysis along with optimization. It was discovered through calibration trials that the pre-stressing method expanded the sensor''s range of measurement, guaranteed overall linearity, and prevented the potential hysteresis phenomena during compression. The sensor''s final sensitivity was calculated to be 1.970 pm/με, and its linear fitting coefficient was 0.999. Finally, the sensor was used to monitor the wind turbine blades and the strain change curve of the root of a normally functioning blade is found to be a sine curve, which provides a certain reference value for judging whether the blade is damaged in the future.