基于安全模式的采购信息系统设计

在企事业的日常工作过程中,采购采购信息系统能提高运行效率。本文基于B/S架构设计了一个高校采购信息系统,分析了系统的安全威胁,提出了基于安全模式的系统设计方法 SDMBSP,利用SDMBSP选用合适的安全模式增强了系统的安全性,取得了良好的效果。     

知识开源化背景下信息安全类课程教学改革初探

本文针对当前知识开源化的现状,结合信息安全类相关课程在北京电子科技学院授课的实际情况,以利用知识开源化所带来的优势,改善课程的教学效果、提高学生的动手实践能力为目的,研究和探讨了信息安全类部分课程的教学模式改革方式和所取得的效果。     

ZrO2膜的相结构与显微组织

本文用X射线衍射和扫描电镜研究了ZrO2膜的晶体结构和显微组织。结果表明ZrO2膜的相结构为立方氧化锆（c-ZrO2）,晶粒尺寸细微。发现ZrO2膜中存在具有{111}面织构柱状晶结构,这种结构可用基片负偏压消除。     

Regeneration of Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>-based high-temperature coal gas desulfurization sorbent in atmosphere with sulfur dioxide

Regeneration of a high-temperature coal gas desulfurization sorbent is a key technology in its industrial applications. A Fe₂O₃-based high-temperature coal gas desulfurizer was prepared using red mud from steel factory. The influences of regeneration temperature, space velocity and regeneration gas concentration in SO₂ atmosphere on regeneration performances of the desulfurization sorbent were tested in a fixed bed reactor. The changes of phase and the composition of the Fe₂O₃-based high-temperature coal gas desulfurization sorbent before and after regeneration were examined by X-ray diffraction (XRD) and X-ray Photoelectron spectroscopy(XPS), and the changes of pore structure were characterized by the mercury intrusion method. The results show that the major products are Fe₃O₄ and elemental sulfur; the influences of regeneration temperature, space velocity and SO₂ concentration in inlet on regeneration performances and the changes of pore structure of the desulfurization sorbent before and after regeneration are visible. The desulfurization sorbent cannot be regenerated at 500°C in SO₂ atmosphere. Within the range of 600°C–800°C, the time of regeneration becomes shorter, and the regeneration conversion increases as the temperature rises. The time of regeneration also becomes shorter, and the elemental sulfur content of tail gas increases as the SO₂ concentration in inlet is increased. The increase in space velocity enhances the reactive course; the best VSP is 6000 h^?1 for regeneration conversion. At 800°C, 20 vol-% SO₂ and 6000 h^?1, the regeneration conversion can reach nearly to 90%.     

大型建筑工程企业网站的建设、发展与管理

信息化是现代社会的特征,网络优势也就是企业的竞争力。以上海“隧道网”为例,介绍大型建设工程企业网站的建设、发展与管理的过程。     

重载圆锥齿轮的自然齿形

从实际生产中冶金重载齿轮齿面发生严重塑性变形的问题受到启发 ,探讨研究了最适合齿轮接触强度和弯曲强度的齿形 ,并分析了这种齿形的形成原理。     

塑料方形把手注射成型工艺的探讨

通过对方形把手的工艺分析,介绍了模具的结构特点及设计方法,满足了产品技术要求,提高了塑件表面质量.     

Investigation on gradient material fabrication with electron beam melting based on scanning track control

A new electron beam control system was developed in a general vacuum electron beam machine by assembling with industrial control computer, programmable logic control （PLC）, deflection coil, data acquisition card, power amplifier, etc. In this control system, scanning track and energy distribution of electron beam could be edited off-line, real-time adjusted and controlled on-line. Ti-Mo gradient material （GM） with high temperature resistant was fabricated using the technology of electron beam melting. The melting processes include three steps, such as preheating, melting, and homogenizing. The results show that the GM prepared by melting technology has fine appearance, and it has good integrated interface with the Ti alloy. Mo and Ti elements are gradually distributed in the inter.face of the gradient material. The microstructure close to the Ti alloy base metal is α ＋ β basket-waver grain, and the microstructure close to the GM is a single phase of β solid solution.