Propagation of transverse bulk and surface acoustic waves in LiNbO (3) variable time-delay devices

Experimental measurements are reported on voltage-controlled acoustic time-delay lines operating at 1 GHz in the nearly pure shear-horizontal (S-H) mode in 38 degrees rotated Y-cut LiNbO(3). The high-acoustic velocity (4800 m/s) in conjunction with the large electroacoustic effect exhibited by this orientation allows high-frequency operation and optimum time-delay tuning sensitivity with a planar, single surface, device geometry. The authors demonstrate fractional time delay of 0.3x10(-6) V(-1 ) for surface electrodes that produce an in-plane E-field. However, the simultaneous excitation and propagation of both a leaky surface-acoustic wave (LSAW) and surface skimming bulk wave (SSBW), both as (nearly pure) S-H waves in these devices, seriously restricts the extent to which it is possible to maximize the time delay modulation sensitivity by reducing electrode gap spacing as done in similar SAW devices. The LSAW and surface-skimming body wave (SSBW) propagate at nearly the same velocity on a free surface, and perturbation of their velocity and relative attenuation rates by surface electrodes causes pronounced interference effects between the two modes for some device geometries.     

Flavonoids of “La Alcarria” honey A study of their botanical origin

Summary The flavonoids present in ten selected samples of La Alcarria honey with different pollen compositions have been HPLC analysed in order to establish if correlations between botanical origin and flavonoid profiles are possible. A common flavonoid pattern is observed in the different samples showing that pollen is not the main source of honey flavonoids. A close correlation between the flavonoid patterns of honey flavonoids and propolis flavonoids has been found suggesting that flavonoid analysis could be more useful in geographical origin determinations than in botanical origin studies.

---

Flavonoide des La-Alcarria-Honigs Eine Studie ihres botanischen Ursprungs

Zusammenfassung Die Flavonoide in Proben in Alcarria-Honig mit unterschiedlicher Pollenzusammensetzung wurden untersucht, um Kortrelationen zwischen dem botanischen Ursprung und den möglichen Flavonoiden zu finden. In den verschiedenen Proben wurde ein Flavonoid-Muster gefunden, wobei der Pollen nicht die Hauptquelle der Honigflavonoide ist. Es wurde jedoch eine enge Korrelation zwischen den Flavonoid-Mustern des Honigs und des Bienenkittharzes gefunden, was für die geographische Herkunft wichtiger ist als die botanische.

     

Acoustic microscopy and nonlinear effects in pressurized superfluid helium

The operation of an acoustic microscope having a resolution of 15 mm has been demonstrated. It uses as a coupling medium superfluid (4 )He colder than 0.9 K and pressurized to greater than 20 bar. The microscope has been used to image objects that show little or no contrast on a scanning electron microscope. In addition, the acoustic microscope has been used to study the properties of sound propagation in the coupling fluid. At low acoustic intensities, the coupling fluid has very low acoustic attenuation at the microscope's operating frequency (15.3 GHz), but near the focal point the acoustic intensity can be high enough that the helium behaves with extreme nonlinearity. In fact, this medium is capable of entering new regimes of nonlinear interaction. Plots of the received signal versus input power display a nearly complete source depletion at certain input power levels and a reconversion to the source frequency at higher power levels. Arguments that the process underlying this nonlinear behavior is harmonic generation are presented.     

基于小波的实时烟雾检测*

传统的离子式、吸气式、光电式等烟雾检测器在大空间中检测烟雾时,会受到发射信号与接收信号之间的距离、平面角度、精确对准等限制,无法对整个空间的烟雾状况进行描述.新的方法通过监测区域的摄像机拍摄的视频图像序列,进行小波变换,分析图像帧在时域和空域的频率特性,来确定被监测区域是否有火灾烟雾的发生.实验证明该方法不受空间高度、热障、易爆、有毒等环境的限制,并且有灵敏度高、抗干扰力强、适用范围广等特点.     

HEAT TRANSFER IN PARTIALLY MISCIBLE TERNARY SYSTEMS

In the study of mass transfer between partially miscible liquids, temperature perturbations have been found to have an important effect in the generation of interfacial activity. Micro- and macro-generated interfacial convection usually occurs in combination with one another even in fairly simple heat or mass transfer events. These combinations are responsible for the enhancement of mass transfer rates. In an effort to acquire a better understanding of the heat transfer effects in ternary liquid-liquid systems, temperature difference profiles were measured when contacting two partially miscible phases. A vertical and a rotational transfer cell were designed to contact the partially miscible phases without inducing external disturbances. Five thermocouples were immersed in the bottom liquid phase at predetermined positions below the interface. In order to understand the influence of the convection generated, the vertical cell was designed to hinder convection in one phase, while the rotational cell permits convection in both phases. The experimental results showed larger temperature differences in the rotational cell after the contact of the phases. Also, systems which were initially unsaturated presented larger heat effects than those in which the partially miscible solvents were initially saturated. Several parameters indicating the importance of heat effects in the ternary systems studied are reported.     

On the robust control of stable minimum phase plants with large uncertainty in a time constant. A fractional-order control approach

This paper addresses the problem of designing controllers that are robust to a great uncertainty in a time constant of the plant. Plants must be represented by minimum phase rational transfer functions of an arbitrary order. The design specifications are: (1) a phase margin for the nominal plant, (2) a gain crossover frequency for the nominal plant, (3) zero steady state error to step commands, and (4) a constant phase margin for all the possible values of the time constant (T$T$): 0<T<∞$0<T<\infty$. We propose a theorem that defines the structure of the set of controllers that fulfil these specifications and show that it is necessary for these robust controllers to include a fractional-order PI$PI$ term. Examples are developed for both stable and unstable plants, and the results are compared with a standard PI$PI$ controller and a robust controller designed using the QFT$QFT$ methodology.     

Event-driven,pattern-based methodology for cost-effective development of standardized personal health devices

Experiences applying standards in personal health devices (PHDs) show an inherent trade-off between interoperability and costs (in terms of processing load and development time). Therefore, reducing hardware and software costs as well as time-to-market is crucial for standards adoption. The ISO/IEEE11073 PHD family of standards (also referred to as X73PHD) provides interoperable communication between PHDs and aggregators. Nevertheless, the responsibility of achieving inexpensive implementations of X73PHD in limited resource microcontrollers falls directly on the developer. Hence, the authors previously presented a methodology based on patterns to implement X73-compliant PHDs into devices with low-voltage low-power constraints. That version was based on multitasking, which required additional features and resources. This paper therefore presents an event-driven evolution of the patterns-based methodology for cost-effective development of standardized PHDs. The results of comparing between the two versions showed that the mean values of decrease in memory consumption and cycles of latency are 11.59% and 45.95%, respectively. In addition, several enhancements in terms of cost-effectiveness and development time can be derived from the new version of the methodology. Therefore, the new approach could help in producing cost-effective X73-compliant PHDs, which in turn could foster the adoption of standards.     

Improving process models by mining mappings of low-level events to high-level activities

While it is possible to analyze the run-time behavior of a business process through process mining techniques, in practice there is often a gap between the low-level nature of the events recorded in an event log and the high-level of abstraction at which the process is modeled. This makes it difficult to understand the recorded behavior in terms of the high-level activities in the process model. Also, it makes it difficult to improve the model based on run-time data about the process. In this work we present an approach to mine mappings between the events in the log and the activities in the model. These mappings can be used to generate suggestions of how the process model can be extended in order to capture the behavior recorded in the event log. Using a real-world and publicly available event log, we show how the approach can improve the model in a stepwise manner, until it covers all the behavior recorded in the event log.     

Digestibility and nutritional value of crude oil from three amaranth species

Oils from a selection ofAmaranthus caudatus, A. hypochondriacus andA. cruentus were extracted with hexane. The crude oils were analyzed for acid value, saponification and iodine number, and were included in basal casein diets for rat studies at 5 and 10% levels to replace equal amounts of refined cottonseed oil. The oils fromA. cruentus andA. hypochondriacus were similar in the oil properties studied and different fromA. caudatus. At either 5 or 10% food intake levels, weight gain and PER were not statistically different from values reported for cottonseed oil. True digestibility of amaranth oil was lower than that of cottonseed oil.A. cruentus oil gave the lowest digestibility. Oil levels induced statistical differences in food intake and digestibility. Oils fromA. caudatus, A. hypochondriacus and cottonseed induced similar serum cholesterol levels, while oil fromA. cruentus gave statistically higher values. Hemoglobin, hematocrit and serum proteins were similar among all groups. Microscopic analysis of the organs of the rats revealed some changes that were also found in cottonseed oil-fed rats. It was concluded that crude amaranth oil has lower digestibility than cottonseed oil, but that it is not responsible for growth-depressing effects when the seed is fed raw as compared to processed materials.     

The toughness of copolymers of polypropylene

A series of fracture mechanics tests of a set of random and impact copolymers of polypropylene, in which the ethylene content was varied, is described. The plane strain toughness is found to change from the homopolymer value, but thereafter to be independent of ethylene content. The yield stress of the impact copolymers decreases markedly with ethylene content, while that for random copolymers increases only slightly. This is reflected in toughness values in tension. A comparison with the behavior of other rubber-modified materials is made and it is concluded that crazing is an important mechanism in polypropylene and is perhaps more rate and temperature sensitive than in acrylonitrile-butadiene-styrene (ABS).