Fabrication of NiO Buffer Layer for YBCO Coated Conductors by Combining Sputtering and SOE Method

In research of YBCO coated conductors, the development of a oxide template for epitaxial growth of YBCO is very important. Matsumoto et al have demonstrated the potential of the surface oxidation epitaxial (SOE) route for formation a cube textured NiO layer on nickel tapes. The epitaxial NiO functions as a buffer layer of chemical reaction between YBCO and nickel, and as a template for the epitaxial growth of YBCO. However, the surface quality of NiO is difficult to control and defects such as crack, spall and deep grooves exist in SOE NiO layer. A new approach combining sputtering and SOE method to obtain crack-free and cube textured NiO layer were reported. Ni tapes prepared by the combination of rolling and recrystallization were used for this work. A coating of Ni was first deposited on the tapes via magnetron sputtering. Then on the coating tapes, continuous and textured NiO layer were achieved by SOE technology.     

一种新型声光玻璃研究与研制

研制出了一种新型锗酸盐声光玻璃。与已报导的亚碲酸盐玻璃和重燧石玻璃的性能作了比较。我们的锗酸盐玻璃的声光品质因数优于重燧石玻璃。     

基于Jack的虚拟环境中一种防止穿越的实现

在虚拟环境下虚拟人手和虚拟物体的交互中,会发生穿越现象。为了解决穿越问题,在人体模型系统Jack的虚拟环境中,根据约束Constraint对象的特点,利用Constraint对象来模拟物体对人手阻挡作用,并利用约束队列实现了对场景中Constraint对象的管理,达到防穿越的效果。     

冷源真空筒氢爆过程实验研究

冷源真空筒内发生氢气-空气混合气体爆炸对真空筒结构完整性构成最大威胁,研究全尺寸模拟件的氢爆过程实验,得到各种工况下真空筒内氢爆炸产生的压力变化.实验结果表明理想配比的氢-空气在真空简内只会发生气体爆燃现象,最大超压为350 kPa.据此计算得到真空筒的von Mises等效应力及各主应力都远低于材料弹性极限,表明即使冷源装置发生最大破坏性的氢爆事故,真空筒仍能保持其结构完整性,不会危及到反应堆结构物安全性.     

屏蔽结构医用直线加速器Halcyon机房的放射防护设计

以某医院核技术应用项目Halcyon加速器为例,通过分析相关射线参数与工作负荷,依据 NCRP No.151和GBZ /T 201,计算Halcyon机房各方向屏蔽墙所需的厚度和关注点的剂量率水平,对改建机房的屏蔽设计与施工方案进行优化,设计了经济可靠的放射防护方案,评估自屏蔽结构在屏蔽设计中的作用,并论证设计的自屏蔽加速器的防护方案效果符合相关法律法规与标准要求,为此类自屏蔽加速器项目的环评和控评提供参考。     

Preparation and structure of fluorinated/non-fluorinated polyacrylate gradient emulsion blend film

The emulsion blend method, which is environmentally friendly and energy saving, was used to prepare a compositional gradient film of fluorinated/non-fluorinated polyacrylate in this paper. The size and glass-transition temperature (T_g) of the emulsion particles were designed to enhance the driving force of their selective congregation and promote the formation of gradient structure. The structures and surface properties of the obtained films were characterized. The results showed that when the fluorinated components have much smaller particle size and higher T_g than those of fluorine-free polyacrylate components, the gradient structures formed in the direction across the film thickness of the films. The concentration of the fluorinated component increased gradually from film-glass interface to film-air interface in the blend film, making the surface free energies of the two sides of the gradient film distinctively different.     

Truly Concomitant and Independently Expressed Short‐ and Long‐Term Plasticity in a Bi2O2Se‐Based Three‐Terminal Memristor

Concomitance of diverse synaptic plasticity across different timescales produces complex cognitive processes. To achieve comparable cognitive complexity in memristive neuromorphic systems, devices that are capable of emulating short‐term (STP) and long‐term plasticity (LTP) concomitantly are essential. In existing memristors, however, STP and LTP can only be induced selectively because of the inability to be decoupled using different loci and mechanisms. In this work, the first demonstration of truly concomitant STP and LTP is reported in a three‐terminal memristor that uses independent physical phenomena to represent each form of plasticity. The emerging layered material Bi₂O₂Se is used for memristors for the first time, opening up the prospects for ultrathin, high‐speed, and low‐power neuromorphic devices. The concerted action of STP and LTP allows full‐range modulation of the transient synaptic efficacy, from depression to facilitation, by stimulus frequency or intensity, providing a versatile device platform for neuromorphic function implementation. A heuristic recurrent neural circuitry model is developed to simulate the intricate “sleep–wake cycle autoregulation” process, in which the concomitance of STP and LTP is posited as a key factor in enabling this neural homeostasis. This work sheds new light on the development of generic memristor platforms for highly dynamic neuromorphic computing.     

Ag/LaNixCo1-xO3触点材料的制备及电接触性能研究

本文运用溶胶-凝胶燃烧法合成了双钙钛矿型LaNixCo1-xO3(LNCO)纳米材料,利用粉末冶金和热挤压技术制备了相应的Ag/LNCO触点材料及元件样品。重点考察了不同Ni、Co含量对Ag/LNCO触点材料微观结构、物相组成、物理性能、力学性能及电寿命服役能力的影响,对其电弧侵蚀失效行为进行了研究,并与SnO2粉体增强Ag基触点材料进行对比。结果表明:溶胶凝胶法合成的LNCO纳米颗粒粒径为20-30 nm,经粉末冶金工艺制备的Ag/LaNi0.5Co0.5O3触点材料电学性能和电寿命都优于Ag/SnO2触点材料,其电阻率低至2.10 μΩ?cm,电寿命性能达到51287次。表明Ag/LaNi0.5Co0.5O3触点材料性能较佳,是一种可以取代Ag/CdO的新型触点材料。     

Evaluation of Fatigue Crack Orientation Using Non-collinear Shear Wave Mixing Method

In this paper, a non-collinear shear wave mixing technique is proposed for evaluation of fatigue crack orientation. Numerical analysis of the nonlinear interaction of two shear waves with crack is performed using two-dimensional finite-element simulations. The simulation results show that the nonlinear interaction of the two shears waves with cracks leads to the generation of transmitted and reflected sum-frequency longitudinal waves (SFLW), moreover the propagation direction of reflected SFLW is correlated with the orientation of crack, which can be used for crack orientation evaluation. Non-collinear wave-mixing experiments were conducted on specimens with fatigue crack. The experimental results show that the directivity of the generated SFLW agrees well with the simulation results, and non-collinear shear wave mixing has potential use in fatigue crack orientation evaluation.     

组成、粘度比及加工条件对PB／CS共混物粘度和形态的影响

研究了组成、粘度比、转速和混合时间对聚丁烯／玉米浆共混物的粘度和形态的影响。结果表明，共混物的粘度均随转速的提高而增大。在高转速下，８０／２０共混物的粘度比其它组成的共混物的粘度增长迅速。在聚丁烯和玉米浆的界面观察到复合乳化结构。分散相液滴尺寸较小时，液滴尺寸的变化对共混物的粘度有很大的影响。