一种多采样率混合编帧数据采集技术的设计与实现

本文以FPGA为主控芯片,设计了一种多采样率混合编帧数据采集技术;重点介绍了A/D转换电路的设计;针对多采样率模拟量通道切换的问题设计了多级模拟信号通道选择拓扑结构;针对速变信号和缓变信号设计了帧结构表,有效的解决了多采样率下复杂信号的采集输入问题;通过试验,可以验证该数据采集技术具有多通道、精度高、可以适应不同采样率传感器等优点;使用该技术的采编器经过了多次高低温和振动试验,性能稳定可靠,目前已经应用在某飞行器大型地面试验中。     

LiMn_(1-x)Fe_xPO_4正极材料制备方法的研究进展

橄榄石型LiMPO_4正极材料相对于层状结构正极材料具有更好的热稳定性。将Mn与Fe按一定比例混合得到的LiMn_(1-x)Fe_xPO_4正极材料,兼具了LiFePO_4和LiMnPO_4二者的优点,从而得到研究者们大量的关注。综述了近五年来LiMn_(1-x)Fe_xPO_4正极材料制备方法的研究进展,并对每种方法的优缺点进行分析,最后分析了该领域今后的发展方向。     

Subnanosecond switching, plasma electrode pockels cell for high-contrast imaging with partially coherent light

A high-contrast optical switch for imaging partially coherent light (~150 times the diffraction limit) requires that it have a large angular acceptance. We describe the development of a high-speed Pockels cell that uses a thin crystal to simultaneously achieve high-contrast (greater than 1800:1) and large-angular acceptance (greater than 7 mrad for a 5-mm aperture). A KD*P crystal was used in a longitudinal-mode configuration with plasma discharges forming low-resistance, high optical transmission electrodes to couple the switching voltage. Rise times of the switched optical pulse of the order of 500 ps were observed. Characterization of the device in the near and far fields was also performed.     

Influence of layered tissue architecture on estimates of tissue optical properties obtained from spatially resolved diffuse reflectometry

Most instruments used to measure tissue optical properties noninvasively employ data-analysis algorithms that rely on the simplifying assumption that the tissue is semi-infinite and homogeneous. The influence of a layered tissue architecture on the determination of the scattering and absorption coefficients has been investigated in this study. Reflectance as a function of distance from a point source for a two-layered tissue architecture that simulates skin overlying fat was calculated by using a Monte Carlocode. These data were analyzed by using a diffusion theory modelfor a homogeneous semi-infinite medium to calculate the scatter and absorption coefficients. Depending on the algorithm and the radial distance, the estimated tissue optical properties were different from those of either layer, and under some circumstances, physically impossible. In addition, the sensitivity and cross talk of the estimated optical properties to changes in input optical properties were calculated for different layered geometries. For typical optical properties of skin, the sensitivity to changes in optical properties is highly dependent on the layered architecture, the measurement distance, and the fitting algorithm. Furthermore, a change in the input absorption coefficient may result in an apparent change in the measured scatter coefficient, and a change in the in put scatter coefficient may result in an apparent change in the measured absorption coefficient.     

Optical Storage Interactive Simulator (oasis): An Interactive Tool for the Analysis of Page-Oriented Optical Memories

Page-oriented optical memories combine high capacity with massive data-transfer rates and could provide the next generation of secondary storage systems. Several technological barriers need to be overcome before these memories become commercial products. One is the need for efficient interfaces to electronic computers. To assist in the analysis of all issues pertaining to such an interface, we have developed the optical storage interactive simulator (oasis), an interactive software tool. oasis can simulate data-encoding schemes, noise sources present in a particular memory system, and data-recovery mechanisms. Bit-error rates and other useful statistics can also be measured. The user has the option of studying the effects of individual error sources to the system output or of applying several of them in any order dictated by the system architecture. This multifaceted analysis will assist the user in evaluating the effectiveness of a particular error-correcting code and choosing the right one for the system.     

Estimation of the surface velocity of debris flow with computer-based spatial filtering

A computer-based spatial-filtering velocimeter to measure the surface velocity of natural debris flow is described. This is a simple and interesting technique implemented with a spatial filter constructed as a software program that processes the video image of debris flow instead of a hardware implementation. The surface velocity of the debris flow at the Mt. Yakedake Volcano, Japan, was estimated by this computer-based spatial-filtering method, and the results were compared with those obtained by a hardware-based spatial-filtering method. Computer-based spatial filtering has the important advantage of a capability for tuning the spatial-filter parameters to the target flow.     

Optoelectronic Recoded and Nonrecoded Trinary Signed-Digit Adder that uses Optical Correlation

A symbolic-substitution-based optical numeric processor that uses recoded and nonrecoded trinary signed-digit (TSD) number representations is proposed. Also, we propose new joint spatial encodings for the TSD numbers that reduce the symbolic-substitution computation rules involved in the processor. Optoelectronic implementation of the proposed recoded adder is feasible. Also, the nonrecoded TSD addition can be performed optically in two steps. Both the proposed recoded and nonrecoded adders are more compact than a recently reported modified signed-digit counterpart and use fewer correlators and spatial light modulators.     

Biased motion-adaptive temporal filtering for speckle reduction in echocardiography

Describes a new fully motion-adaptive spatio-temporal filtering technique to reduce the speckle in ultrasound images. The advantages of this approach are demonstrated in echocardiographic boundary detection and in comparison with other techniques. The first stage of many automated echocardiographic image interpretation schemes is filtering to reduce the amount of speckle noise. The authors show how the two-dimensional least mean squares (TDLMS) filter can be configured as a motion-compensated filter for a time sequence of ultrasound images that eliminates the blurring associated with direct averaging. For an image corrupted by multiplicative speckle noise, the mode of the intensity distribution approximates the maximum likelihood estimator. In consequence, the temporal filter's output is biased towards the mode from the mean, using information contained within the speckle itself. A new adaptive algorithm for controlling the filter's convergence is also included. To evaluate performance, application to simulated, phantom, and an in vivo test sequence of the carotid artery are considered in comparison with other techniques. The effect of filtering on edges is of great importance, as these are used by subsequent image interpretation schemes. Quantitative measurements demonstrate the effectiveness of the Biased TDLMS filter, for both noise reduction and edge preservation. Echocardiographic images have a high noise content and suffer from poor contrast. Despite this challenging environment, the Biased TDLMS filter is shown to produce images that are better inputs for subsequent feature extraction. The benefits for echocardiographic images are highlighted by considering the problems of mitral valve analysis and extraction of the left atrium boundary.     

Trace Analysis of Zn(II), Be(II), and Bi(III) by Enzyme-Catalyzed Chemiluminescence

A novel technique for the trace analysis of metal ions Zn(II), Be(II), and Bi(III) in bulk solutions is discussed. This technique involves the generation of a chemiluminescence signal from alkaline phosphatase catalyzed hydrolysis of a phosphate derivative of 1,2-dioxetane. Zn(II) can be determined by two methods, reactivation of the alkaline phosphatase apoenzyme and inhibition of the native enzyme. Be(II) and Bi(III) can be determined quantitatively by inhibition of the native enzyme. Subppb to ppm level detection of Zn(II), Be(II), and Bi(III) has been achieved. Initial studies with mixed metals are also reported. The technique described is rapid and sensitive and can be readily applied to the microassay of heavy metal ions.     

Rapid, noninvasive concentration measurements of aqueous biological analytes by near-infrared Raman spectroscopy

Accurate concentration measurements of glucose, lactic acid, and creatinine in saline solution have beena chieved with near-IR Raman spectroscopy and a partial least-squares analysis. The Raman spectra were acquired remotely through optical fibers. A root-mean-squared prediction error of 1.2 mM for glucose concentration was achieved in 100 s. Concentrations of other analytes were predicted with similar accuracy.