Craft Beer Microflora Identification Before and After a Cleaning Process

Although beer is a relatively safe product, growth of spoilage microorganisms can cause economic damage. The most effective way to prevent the spoilage of beer is to control contamination with adequate cleaning and sanitation. The aim of this work was to evaluate the microbial flora present both before and after a specific hygiene process was implemented during a brewpub's craft beer production. Various selective and differential culture media methods for the enumeration of beer‐spoilage species are available, but they are time consuming compared to modern techniques. The utilisation of accurate molecular methods, added to the routine microbiological analyses, allowed for the fast identification of common environmental contaminants of beer. A poor sanitation plan by the brewer resulted in microbial contamination of the brewpub. This result demonstrates the importance of good sanitation to avoid the presence of undesirable microorganisms in the product. A cleaning‐in‐place (CIP) method, in operation in many small breweries, could be utilised to prevent the occurrence of such brewery and beer microbial contaminants. In small breweries, the simplest CIP units consist of a single tank and a portable pump. This method requires no additional equipment besides a spraying ball, which is usually included in the design of most tanks.     

Diminished macrophage cholesterol removal rate by the altered HDL metabolism in the Nagase analbuminemic rat

Dyslipoproteinemia of the Nagase analbuminemic rat (NAR) is characterized by elevated concentrations of VLDL and LDL attributed to increased rates of liver lipoprotein synthesis. Increased lysophosphatidylcholine (LPC) in NAR HDL has been attributed to high plasma LCAT activity. We show here that, as compared with Sprague-Dawley rats (SDR), NAR plasma triacylglycerol (TAG), total cholesterol (TC), HDL TAG, protein, total phospholipids (PL), LPC, and PS are increased. These alterations rendered the NAR HDL particle more susceptible to the activity of the enzyme hepatic lipoprotein lipase (HL), which otherwise was unaltered in our study. Fractional catabolic rates in blood of the autologous ¹²⁵I-apoHDL (median and lower quartile values), were, respectively, 0.231 and 1.645 (n=10) in NAR as compared with 0.140 and 0.109 (n=10) in SDR (P=0.012), corresponding to synthesis rates of HDL protein of 89.8±33.7 mg/d in NAR and 17.4±6.5 mg/d in SDR (P=0.0122). Furthermore, Swiss mouse macrophage free-cholesterol (FC) efflux rates, measured as the percent [¹⁴C]-cholesterol efflux/6 h, were 8.2±2.3 (n=9) in NAR HDL and 11.2±3.2 (n=10) in SDR HDL (P=0.03). Therefore, in NAR the modification of the HDL composition slows down the cell FC efflux rate, and together with the increased rate of plasma HDL metabolism influences the reverse cholesterol transport system.     

High‐Pressure High‐Temperature Transparent Fixed‐Bed Reactor for Operando Gas‐Liquid Reaction Follow‐up

A 3‐MPa, 350 °C fixed‐bed reactor was designed to follow‐up gas‐liquid‐solid reactions on a millimetric size heterogeneous catalyst with Raman spectroscopy. The transparent reactor is a quartz cylinder enclosed in a Joule effect heated stainless‐steel tube. A methodology to determine how to focus the microscope for liquid and solid phase characterization is presented. The setup was validated by performing diesel hydrodesulfurization on a CoMo/alumina extrudate catalyst with a conversion very close to expected values along with the acquisition of Raman spectra of the solid catalyst showing an evolution of the catalyst phase during sulfidation.     

Electrospinning of gelatin fibers using solutions with low acetic acid concentration: Effect of solvent composition on both diameter of electrospun fibers and cytotoxicity

Gelatin fibers were prepared by electrospinning of gelatin/acetic acid/water ternary mixtures with the aim of studying the feasibility of fabricating gelatin nanofiber mats at room temperature using an alternative benign solvent by significantly reducing the acetic acid concentration. The results showed that gelatin nanofibers can be optimally electrospun with low acetic acid concentration (25%, v/v) combined with gelatin concentrations higher than 300 mg/mL. Both gelatin solutions and electrospun gelatin mats (prepared with different acetic acid aqueous solutions) were analyzed by Fourier transform infrared spectroscopy and differential scanning calorimetry techniques to determine the chemical and structural changes of the polymer. The electrospun gelatin mats fabricated from solutions with low acetic acid content showed some advantages as the maintenance of the decomposition temperature of the pure gelatin (～ 230°C) and the reduction of the acid content on electrospun mats, which allowed to reach a cell viability upper than 90% (analyzed by cell viability test using human dermal fibroblast and embryonic kidney cells). This study has also analyzed the influence of gelatin and acetic acid concentration both on the solution viscosity and the electrospun fiber diameter, obtaining a clear relationship between these parameters. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42115.     

Mechanism and kinetics of the free radical ring-opening polymerization of cyclic allylic sulfide lactones

The polymerization of 7-, 8- and 11-membered lactones, 6-methylene-1,4-oxathiepan-7-one, 3-methylene-1,5-oxathiocan-2-one and 3-methylene-1-oxa-5-thiacycloundecan-2-one in benzene at 70, 40–70 and 40–65 °C, respectively, is presented. All polymerizations proceeded with complete ring-opening up to approximately 25% conversion, where insoluble polymer was formed. Evidence is given attributing polymer double bond loss to crosslinking, although redistribution of the molecular weights via addition to polymer double bonds followed by β-fragmentation also appears to occur for polymerizations of the 8- and 11-membered lactones. Michael adducts of lactones with 2-methyl-2-propanethiol were prepared as models for chain-transfer products of hydrogen abstraction by carbon-centred radicals. Polymerization rates were found to increase marginally with ring size. Arrhenius parameters obtained for the polymerizations of the 8- and 11-membered lactones indicated that the addition step was more important than fragmentation in determining the rate of propagation.     

Catalytic performance of silica-aluminas synthesised with the help of chitosan biopolymer

Mesoporous amorphous silica-aluminas were synthesised with standard aluminium and silicon sources by means of the formation of inorganic–organic composites with the addition of chitosan biopolymer, and compared to analogous catalysts synthesised conventionally. Some catalysts were subjected to hydrothermal treatment. The resulting specific surface areas were from 480 to 573 m²/g in the untreated samples and 300–430 m²/g in the hydrotreated catalysts, average pore sizes ranging from 32 to 100 Å with sharp, unimodal distributions. The chitosan materials showed higher specific surface areas and larger pore sizes than those of their non-chitosan counterparts. The most important differences in the acidic properties were in the relationships between tetrahedral and octahedral aluminium atoms, the chitosan materials having higher relative amounts of tetrahedral aluminium than the conventional silica-aluminas. Evidences of stabilization in the physical and chemical properties were observed in the chitosan-containing catalysts. The catalytic performance was evaluated with the conversion of tri-isopropylbenzene at 400 °C, to assess activity and accessibility, and cyclohexene at 300 °C, to assess hydrogen transfer properties. The highest activity and accessibility was observed in the hydrotreated, chitosan-containing catalyst, while hydrogen transfer capabilities were similar to those of medium unit cell sizes, equilibrium commercial FCC catalysts.     

Control of grain size and -orientation in multi-crystalline silicon ingots

Two different cooling rates have been imposed during the early solidification of two multi-crystalline silicon ingots with 250mm diameter and 100mm height in a pilot scale directional solidification furnace. This has been done by opening a variable heat leak system below the crucible in order to achieve a high initial cooling rate in one of the ingots. The grain-structure and -orientation of these two ingots have been investigated by light microscopy (LM) and electron backscattered diffraction (EBSD), and their electrical properties by quasi-steady state photo-conductance (QSSPC) and surface photovoltage (SPV) method. The ingot with the high initial cooling rate shows predominantly grains which are significantly larger than what is usually found in mc-Si. The minority carrier diffusion lengths measured on the large grains in the ingot with high cooling rate show higher values than those measured on the ingot with smaller grains. These results indicate that principles of grain size and -orientation control in mc-Si ingots can be applied to a pilot scale furnace, and the potential for up-scaling to industrial ingots with improved electrical properties and, thus, higher solar cell conversion efficiency.     

Main, mediating, and moderating effects of social support on the well-being of survivors of intimate partner violence across 2 years.

Intimate partner violence is a serious and pervasive social problem with deleterious consequences for survivors’ well-being. The current study involved interviewing 160 survivors 6 times over 2 years to examine the role of social support in explaining or buffering these negative psychological consequences. The authors examined both between- and within-persons variability to explore women’s trajectories regarding their experiences of abuse, social support, depression, and quality of life (QOL). Findings revealed the complex role of social support on women’s well-being. Evidence was found for main, mediating, and moderating effects of social support on women’s well-being. First, social support was positively related to QOL and negatively related to depression. Social support also partially explained the effect of baseline level and subsequent change in physical abuse on QOL and depression over time, partially mediated the effects of change in psychological abuse, and moderated the impact of abuse on QOL. The buffering effects of social support were strongest at lower levels of abuse. Implications for future research and intervention are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)