Comparison of microwave and thermal cure of epoxy resins

Stoichiometric mixtures of DGEBA (diglycidyl ether of bisphenol A)/DDS (diaminodiphenyl sulfone) and DGEBA/mPDA (meta phenylene diamine) have been isothermally cured by electromagnetic radiation and conventional heating using thin film sample configurations. Fourier transform infrared spectroscopy (FTIR) was used to measure the extent of cure. Thermal mechanical analysis (TMA) was used to determine the glass transition temperatures directly from the cured thin film samples. Well-defined glass transitions were observed in the TMA thermograph for both thermal and microwave cured samples. Significant increases in the reaction rates have been observed in the microwave cured DGEBA/DDS samples. Only slight increases in the reaction rates have been observed in the microwave cured DGEBA/mPDA samples. Higher glass transition temperatures were obtained in microwave cured samples compared to those of thermally cured ones after gelation. The magnitude of increases of glass transition temperature is much larger for the DGEBA/DDS system than DGEBA/mPDA system. The microwave radiation effect was much more significant in DGEBA/DDS system than in DGEBA/mPDA system. DiBenedetto's model was used to fit the experimental T_g data of both thermal and microwave cured epoxy resins.     

Evaluating the 1931 CIE color‐matching functions

The use of colorimetry within industry has grown extensively in the last few decades. Central to many of today's instruments is the CIE system, established in 1931. Many have questioned the validity of the assumptions made by Wright¹ and Guild,² some suggesting that the 1931 color‐matching functions are not the best representation of the human visual system's cone responses. A computational analysis was performed using metameric data to evaluate the CIE 1931 color‐matching functions as compared to with other responsivity functions. The underlying assumption was that an optimal set of responsivity functions would yield minimal color‐difference error between pairs of visually matched metamers. The difference of average color differences found in the six chosen sets of responsivity functions was small. The CIE 1931 2° color‐matching functions on average yielded the largest color difference, 4.56 ΔE. The best performance came from the CIE 1964 10° color‐matching functions, which yielded an average color difference of 4.02 ΔE. An optimization was then performed to derive a new set of color‐matching functions that were visually matched using metameric pairs of spectral data. If all pairs were to be optimized to globally minimize the average color difference, it is expected that this would produce an optimal set of responsivity functions. The optimum solution was to use a weighted combination of each set of responsivity functions. The optimized set, called the Shaw and Fairchild responsivity functions, was able to reduce the average color difference to 3.92 ΔE. In the final part of this study a computer‐based simulation of the color differences between the sets of responsivity functions was built. This simulation allowed a user to load a spectral radiance or a spectral reflectance data file and display the tristimulus match predicted by each of the seven sets of responsivity functions. © 2002 Wiley Periodicals, Inc. Col Res Appl, 27, 316–329, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.10077     

Embodied Robot versus Virtual Agent: Involvement of Preschool Children in Motor Task Performance

Embodied robots are known to be preferable in most cases to their virtual agents for interaction with and performance by human subjects. This study compared the efficacy of an embodied robot-coacher and its virtual agent in involving preschool children in the performance of playlike motor tasks. The robot or its virtual agent demonstrated movements, asked the children to repeat them, and provided positive feedback on their performance. The difficulty of the motor tasks was increased over the course of the session. Two groups of children were studied, one of them with and the other without previous experience of interaction with the embodied robot. In the experienced group, involvement in motor tasks was successfully induced by both the embodied robot and its virtual agent, but the children interacted less well with the virtual agent than with the embodied robot. Children in the inexperienced group did not interact at all during the experiment with the virtual agent. Because participants in the experiment were preschool children in their natural environment, this study proposes the combined use of an embodied robot and its virtual agent for motor involvement.     

Some dynamic mechanical properties of unimodal and bimodal networks of poly(dimethylsiloxane)

Summary Elastomeric networks of polydimethylsiloxane prepared by end-linking chains having molecular weights in the range 18,500 to 220 g mol^-1 were studied from -128 to 50°C using a Rheovibron DDV III Viscoelastometer. In the case of the unimodal networks, the glass transition temperature T_g was generally insensitive to degree of cross-linking. The intensity of the tan δ relaxation, however, increased by over an order of magnitude over the range of cross-link densities investigated. Bimodal networks prepared from mixtures of relatively long and very short PDMS chains also had values of T_g which were insensitive to degree of cross-linking. Finally, as expected, the intensities of the tan δ peak for the bimodal networks could not be explained on the basis of simple additivity of contributions from the relatively long and the very short network chains.     

Lipids ofCrassostrea virginica. I. Preliminary investigations of aldehyde and phosphorous containing lipids in oyster tissue

Oyster tissue contained 2.4% lipid, 0.14 μmole aldehyde per milligram lipid and at least 10 μg phosphorous per milligram lipid. The neutral lipid represented 58%, the glycolipid 6%, and the polar lipid 36% of the total lipid recovered after silicic acid column chromatography. Aldehydes were found in all fractions, but the presence of plasmalogen was verified in only the neutral and polar lipid fractions. At least 68% of the plasmalogen in oyster lipid was found in the polar lipid fraction. At least 13% of the phosphorous in oyster lipids was present as phosphonolipid. The distribution of phosphate and phosphonate lipids was: diacyl phospholipid 38.1%, plasmalogen phospholipid 21.8%, sphingophosphonolipid 13.5%, glyceryl ether phospholipid 8.3%, sphingophospholipid 6.9%, plasmalogen phosphonolipid 6.4%, diacyl phosphonolipid 2.6%, and glyceryl ether phosphonolipid 2.4%. When the per cent of phosphorous as phosphonolipid within the plasmalogen and glyceryl ether classes was calculated, similar values were obtained. These results support the hypothesis that there is a product precursor relationship between these two classes of lipids. Some of the data taken from a thesis to be submitted to the Graduate School, University of Maryland, by Leslye Johnson in partial fulfillment of the requirements for the M.S. degree in biochemistry.     

A study of structural determinants in the interleukin-1 fold

The structures of interleukin-1ß, basic fibroblastgrowth factor and Erythrina trypsin inhibitor have been analysedin order to determine whether the hydrophobic core remains conserved,even when the structures have extremely low sequence similarities.We find that there are significant differences in the way eachprotein achieves a satisfactory arrangement of core residuesand that positions which contribute to the core of one structureare not guaranteed to contribute to the integrity of another.Furthermore, the side-chain packing arrangements of these coreresidues vary significantly between the three structures. Duringthis analysis the side-chain rotamers for three independentlydetermined interleukin-1ß structures were also compared.It was found that although buried residues are generally inagreement the remaining residues frequently occupy differentrotamers in the three structures. This suggests that althoughmeaningful studies are possible for buried side-chains the resultsobtained from equivalent analyses of accessible residues shouldbe treated with caution. These results are discussed with specificreference to the optimization of side-chain packing in proteinsof known structure.     

Temporal evolution of contacts and communities in networks of face-to-face human interactions

Temporal dynamics of social interaction networks as well as the analysis of communities are key aspects to gain a better understanding of the involved processes, important influence factors, their effects, and their structural implications. In this article, we analyze temporal dynamics of contacts and the evolution of communities in networks of face-to-face proximity. As our application context, we consider four scientific coil- ferences. On a structural level, we focus on static and dynamic properties of the contact graphs. Also, we analyze the resulting community structure using state-of-the-art automatic community detection algorithms. Specifically, we analyze tile evolution of contacts and communities over time to consider the stability of the respective conmmnities. Furthermore, we assess different factors which have an influence on the quality of com- munity prediction. Overall, we provide first important insights into the evolution of contacts and communities in face-to-face contact networks.     

Thermal expansion of an SiC particle-reinforced aluminum composite

Using a push-rod dilatometer, we measured between 76 and 390 K the thermal expansion of a particle-reinforced-composite wrought plate obtained by powdermetallurgy methods. The particles, 30% by volume, consisted of monocrystals of -SiC with sizes near 10 m. The matrix consisted of a 6061 aluminum alloy with original particle sizes near 20 m. We found the perpendicular thermal expansivity, ₃, higher by 26% than the in-plane thermal expansivity, ₁-₂. These values differ from a rule-of-mixture prediction by –3 and –23%, respectively. All three _i, components lie outside the Rosen-Hashin bounds. Levin's isotropic model agrees within 10% with the ₁-₂-₃ average. Both the anisotropy and the bounds violation result from microstructural nonhomogeneity arising from processing. Rosen and Hashin's transverse-isotropicsymmetry relationships account approximately for these effects by introducing the anisotropic elastic constants. Using neutron diffraction, we determined that the SiC particles are textureless.Paper presented at the Tenth International Thermal Expansion Symposium, June 6–7, 1989, Boulder, Colorado, U.S.A.     

A high-temperature oxidation-resistant Fe-Mn-Al-Si alloy

To develop satisfactory alloys without Cr or Ni for high-temperature application up to 1100C, three alloys based on Fe-10%Al-Si with differing fourth (or fifth) element additions were oxidized in air at 1100°Cfor 24 hr. A low carbon, Fe-30Mn-10Al-Si alloy exhibited excellent high-temperature oxidation resistance. The total weight gain for 24 hr oxidation in air at 1100°C was only 1.03 mg/cm ². After air oxidation for 6 days at 1100°C, no nodule formation or breakthrough oxidation occurred. Post-oxidation SEM and EDAX examination showed that a thin, compact, protective alumina scale formed on the alloy.Visiting Scientist (People's Republic of China).     

Evolution-in-materio: solving computational problems using carbon nanotube–polymer composites

Evolution-in-materio uses evolutionary algorithms to exploit properties of materials to solve computational problems without requiring a detailed understanding of such properties. We show that using a purpose-built hardware platform called Mecobo, it is possible to solve computational problems by evolving voltages and signals applied to an electrode array covered with a carbon nanotube–polymer composite. We demonstrate for the first time that this methodology can be applied to function optimization and also to the tone discriminator problem (TDP). For function optimization, we evaluate the approach on a suite of optimization benchmarks and obtain results that in some cases come very close to the global optimum or are comparable with those obtained using well-known software-based evolutionary approach. We also obtain good results in comparison with prior work on the tone discriminator problem. In the case of the TDP we also investigated the relative merits of different mixtures of materials and organizations of electrode array.