Effect of Wall Surface Properties at Different Drying Kinetics on the Deposition Problem in Spray Drying

Current methods in alleviating the wall deposition problem in spray drying emphasize mainly controlling the stickiness of the drying particles and less attention is placed on the properties of the dryer wall. In this experimental study, the effect of wall surface properties on the deposition mechanism has been investigated. Properties considered in classifying different wall materials were surface energy, roughness, and dielectric properties. The model solution contained sucrose, representing low-molecular-weight sugars commonly encountered in spray drying of fruit and vegetable juices. The effect of wall properties on deposition was explored at different drying rates producing particles of different surface rigidity. Larger surface roughness produced higher deposition fluxes for particles with high impact velocity and moisture. Surface energy and surface roughness were found to have no significant effect for dry rigid particles at the middle and bottom elevation of the drying chamber. However, material with lower surface energy (Teflon) exhibited less deposition for rubbery particles at such elevations. Analysis shows that dielectric wall material (Teflon) tends to enhance deposition of dry particles because of attrition at the surface. Higher wall temperature was found to produce slightly more deposition. The results of this work give a general indication of the effect of wall material on the deposition problem and provide the fundamental understanding for further studies along this line. Proper selection of dryer wall material will provide potential alternatives for reducing the deposition problem.     

One-to-Many and Many-to-One Optical Chaos Communications Using Semiconductor Lasers

A theoretical construction of one-to-many (OTM) and many-to-one (MTO) chaos synchronization communications using semiconductor lasers is presented. One center laser provides strong injections (strong link) to other side lasers, and the side lasers also provide weak injections (weak link) to the center one. Simulation results show that the side lasers synchronize with the center laser through injection-locking. In addition, messages transmitted via the strong links or the weak links experience strong chaos pass filtering, enabling us to realize OTM and MTO communications.     

Determination and interpretation of fractal properties of the sandstone pore system

A knowledge of fractal properties of the pore system is extremely useful with regard to the interrelationships between moisture transport and pore structure. The fractal dimension characterises the egree of resolutiondependence of a property. Given a completely interlaced pore system such as that of sandstone, the fractal dimension of the pore volume, or the porosity, quantifies the cross-sectional variability of the pore channels and is thus of great relevance with regard to transport processes. The fractal dimension of the pore surface describes the surface roughness. A newly-developed measuing technique is presented for the simultaneous determination of fractal dimensions of porosity and pore surface and for establishing fraction radii distributions in order to derive relevant parameters for moisture transport.     

Determination of the width of the transition layer between the crystalline and amorphous zones in nylon 1010 by SAXS

The width of the transition layer between the crystalline and amorphous zones in nylon 1010 was determined by SAXS with point collimation and long-slit collimation, respectively. The width of the transition layer, E, was found to be 1.7 nm. The results show that the width of the transition layer is independent of crystallinity.     

Sirius叠前深度偏移在莺歌海盆地“泥拱模糊带”处理中的应用

在对Sirius叠前深度偏移软件应用开发的基础上,分析讨论了Sirius 2D叠前深度偏移速度模型建立、层析成像及演、叠前深度偏移以及深度聚焦等技术环节的基本原理,并以莺歌海盆地某测线的处理为例,具体分析了Sirius 2D叠前深度偏移处理的流程、主要参数及时效.文中还分析讨论了莺歌海盆地中央“泥拱带”叠前深度偏移处理的地质效果.实践表明,莺歌海盆地广泛发育的与“泥拱模糊带”有关的构造各有其特殊性,只有通过3D叠前深度偏移处理才能从根本上解决“泥拱模糊带”的成像问题.     

基于TMN的接入网网管系统模型

本文介绍了 TMN 网管系统的体系结构,进而讨论了接入网网管系统的体系结构和管理接口的有关问题。     

浅谈抽水蓄能电站的特点及其优越性

本文介绍了国外抽水蓄能电站的发展过程与现状，修建抽水蓄能电站的八大优点。为了改善我省电力系统的运行条件，提出了在我省修建抽水蓄能电站的四点建议。     

SMS——智能网的业务管理系统

本文叙述了智能网的业务管理系统所实现的３种功能：业务管理功能，网络管理功能和业务管理访问功能，还介绍了业务管理和网络管理之间的关系，ＳＭＳ的集中式和分布式两种体系结构及业务管理功能的设计方法和进一步研究方向。     

通过室内实验及同位素测井技术评价高分子聚合物驱油效果

2500万超高分聚合物室内驱油实验研究了聚合物分子量、浓度、粘度、聚用量、段塞组合等各项性能指标对驱油效果的影响。本文根据室内实验结果,在北一区断西注聚后期开展矿场试验,取得了较好的开发效果。试验前后对比,注入粘度明显增大,月含水上升速度得到有效控制,吸入剖面有了新的动用,有63.1%的油井出现了明显的二次受效特征,取得了显著的经济效益。同时对驱油效果进行系统分析。驱油效果表明:应用2500万超高分聚合物是进一步提高聚驱采收率的有效途径。     

准噶尔盆地腹部超压层分布研究

准噶尔盆地腹部普遍发育深层（大于4000m）超压系统，很多钻井都钻遇超压。通过对超压段钻井、地质、测井、地震特征系统研究发现，超压段泥浆密度大幅增加，具有高声波时差、低电阻率以及地震低速的超压响应特征。利用Dix公式计算地震层速度和利用Fillippone公式计算地层压力，得到超压数据体。准噶尔盆地腹部超压在白垩系及其以下沉积地层中均有分布，超压层的深度范围不同。分1井西凹陷边缘以及昌吉凹陷西南有空层现象。超压顶面分布的层位由北往南、从东到西逐渐变浅，从三叠系顶部到白垩系底部。深部超压对油气分布和富集有着重要的控制作用，准噶尔盆地腹部超压层分布的研究将对本区油气勘探起积极的推动作用。