Thermal conversion (visbreaking) of heavy Iraqi residue

A heavy Iraqi residue was thermally cracked using a soaker visbreaking process at temperatures between 435 and 480 °C, with a range of residence times of 43–109 s in the coil and 151–379 s in the soaker. The pressure was kept constant at 7 bar. Visbroken products were characterized, evaluated and fractionated into light, middle and heavy cuts. The stability of the visbroken products was compared with that of the original feedstock. Also an activation energy was calculated for the visbreaking process and related to the severity of the process. The results obtained show that the conditions used were not severe and could be applied to obtain a required conversion depending on the uses of the products.     

Chlorophyll and plankton of the Gulf coastal waters of Saudi Arabia bordering a desalination plant

As on land, plants are the real producers in the sea, and on them depend all marine living resources and the basic sustainability of ecosystems. Primary production is performed by chlorophyll-bearing plants ranging from the tiny phytoplankton to the giant kelps through the process ofphotosynthesis. Zooplankton play an important role as secondary producers, and together with phytoplankton they support the vast assemblages of marine food chain with all their diversity and complexity. Data on chlorophyll pigments, phytoplankton and zooplankton are regarded as a sound basis for environmental appraisal of ecosystems. This paper presents a set of data collected from the Saudi Arabian coastal waters near the desalination plants in AI-Jubail. Materials were collected from six different sites covering the intake and discharge zones during cruises carried out in 1997-1998. Analyses of chlorophyll pigments were made using the spectrophotometric method. Plankton samples were collected using a Nansen plankton net with a mesh size of 75 μ and analyzed following standard procedures. Chlorophyll a, b, c and phaeophytin are the most commonly occurring pigments in seawater. Their concentrations showed wide fluctuation. The phytoplankton community was composed of 35 genera representing the Diatoms, Dinoflagellates and blue- green algae. Zooplankton were composed ofProtozoa, Coelenterata, Ctenophora, Aschelminthes, Annelida, Mollusca, Arthropoda, Echinodermata and Chordata. Arthropoda, represented by Cladocera, Copepoda and Crustacean larvae, formed the largest group followed by Chordata. The distribution of phyto- and zooplankton was examined and discussed on a seasonal, annual and inter-annual basis. In terms of species, overall species composition was not affected by plant discharge. The study brings out a greater understanding of the changes experienced by biotic communities as a result of impingement, entrainment and entrapment consequent to water passage through the plant structures. The study reflects the ecological relationships that the phytoplankton and the zooplankton of the region possess with respect to intake and discharge. Further, the study has brought to light a very redeeming feature of the ecosystem to sustain its productivity and planktonic abundance. It was observed that seawater temperature, conductivity and total suspended solids did not act as limiting factors. Besides throwing much light on the little known biological aspects of desalination sites, the data provided constitute a significant addition to the knowledge base of marine living resources in an industrial zone of Gulf coastal waters.     

Weight loss, polarization, electrochemical impedance spectroscopy, SEM and EDX studies of the corrosion inhibition of copper in aerated NaCl solutions

This work reports results of weight loss, potentiodynamic polarization and impedance measurements on the corrosion inhibition of copper in aerated non-stirred 3% NaCl solutions in the temperature range 15–65 °C using sodium oleate (SO) as an anionic surfactant inhibitor. These studies have shown that SO is a very good ”green”, mixed-type inhibitor. The inhibition process was attributed to the formation of an adsorbed film on the metal surface that protects the metal against corrosive agents. Scanning electron microscopy (SEM) and energy dispersion X-ray (EDX) observations of the electrode surface confirmed the existence of such an adsorbed film. The inhibition efficiency increases with increasing surfactant concentration and time of immersion, while it decreases with solution temperature. Maximum inhibition efficiency of the surfactant is observed at concentrations around its critical micellar concentration (CMC). The potential of zero charge (pzc) of copper was studied by ac impedance, and the mechanism of adsorption is discussed. The sigmoidal shape of the adsorption isotherm confirms the applicability of Frumkin’s equation to describe the adsorption process. Thermodynamic functions for the adsorption process were determined.     

Wear of graphite anodes during electrolysis of add sulphate solutions

Graphite electrodes were prepared by mixing calcined coke and coal tar pitch. They were pressed under 250 kg cm^–2 and heat treated up to 2800° C. Rectangles measuring 70 mm x 40 mm x 8 mm were anodically polarized under galvanostatic and potentiostatic conditions. Electrolyses were conducted at 10–50 mA cm^–2 for periods ranging from 10–120 hours in Na₂SO₄ solutions acidified with sulphuric acid to various pH values. The wear of graphite anodes increased with decreasing bath temperature, increasing acid concentration, decreasing pH of the electrolyte and increasing current density. A model is suggested which assumes that corrosion takes place via the formation of a lamellar crystal compound with the formula (C ₈ ⁰ O)(OH)₃HSO ₄ ^– ·2H₂SO₄.The compound is unstable at higher temperatures when corrosion is effected by oxidation of graphite by atomic oxygen. The formation of the carbon ions was found to be a necessary precondition for the formation of the complex.     

Synchronous receiver initiated MAC protocol for long-lived sensor networks

In this paper, we discuss the design of a new Medium Access Control (MAC) protocol, SRI-MAC (Synchronous Receiver Initiated MAC), for wireless sensor networks whose goal is to extend the lifetime of the network by avoiding major energy waste causes, such as collisions, overhearing and idle listening.     

Chaos based Zero-steganography algorithm

Multimedia Tools and Applications - Conventional steganography focuses on invisibility and undetectability, as the main concern is to make the algorithms immune to steganalysis. Zero-steg-anography...     

The impact of interaction quality factors on the effectiveness of Web-based information system: the mediating role of user satisfaction

Recently, IS researchers have focused on the assessment of Web-based information system (WBIS) at the individual level as it highly contributes to the organizations’ employees. The evaluation and development of WBIS is significantly needed because the top management is in need of justifying their costly IT investment in terms of its impacts on employee performance. For this purpose, this study is primarily concerned with the development and validation of new multidimensional instrument, and also a theoretical framework for assessing the impacts of user interface quality, online communication quality, and user satisfaction on the effectiveness of Web employee portals. The effectiveness is assessed in terms of contextual performance. In a large-scale study, a sample of 384 United Nations Relief and Works Agency for Palestine Refugees respondents are gathered in order to validate and check the reliability of the adapted study instrument. The results of validity and reliability analysis provide enough confidence to proceed toward validating the proposed theoretical framework. The results of multiple-regression analysis indicate that there is a positive significant relationship between user interface quality, communication quality, user satisfaction, and effectiveness at significance level (sig. < 0.01). As another important point, the results of hierarchical regression showed that user satisfaction has a mediating role on the relationship between user interface quality, communication quality, and contextual employee performance. The findings and implications of this research are discussed. Finally, it is expected that this study would contribute to empirical studies in the fields of IS and user behavior assessment.     

Determination of residual organic matter in extracted oil sands using a low temperature ashing method

The application of a low temperature ashing method for estimating total residual organic matter (toluene insolubles) in oil sands is described. A linear correlation exists between organic carbon content and loss on ignition at 400 ± 10 °C of solvent extracted oil sands. The ratio between total organic carbon and the weight loss on ignition (CT/LOl) owing to the removal of residual organic matter is much lower than that obtained for toluene soluble bitumen fractions, indicating very different chemical composition for the residual organic matter. The measured carbon content of the residual organic matter in oil sands suggests that this material could be a mixture of various fractions contained in resins, asphaltenes, asphaltic acids and humic acids.     

Formation of Nanocrystalline Calcia by the Decomposition of Calcite

Formation of nanocrystalline calcia from calcite has been studied in situ via transmission electron microscopy. The crystallographic transformation occurred via two mechanisms: the first is by distortion of the cleaved rhombohedron of calcite, formed by {104} planes in hexagonal coordinates, into a cube. This produced a microstructure of oriented, elongated nanocrystals of calcia with planar boundaries. In the second mechanism, the micrometer-sized parent calcite particles broke up into nano-sized grains as the decomposition began, leading to irregularly shaped, randomly oriented nanocrystals of calcia.