Kinetic study of liquid lipase-catalyzed glycerolysis of olive oil using Lipozyme TL 100L

Monoacylglycerol (MAG) and diacylglycerol (DAG) are two natural components found in most edible oils and fats. Conventional synthesis of MAG and DAG is usually conducted by glycerolysis of triacylglycerol (TAG) at high temperatures (above 200°C) in the presence of an alkaline catalyst. In this work, the synthesis of MAG and DAG using enzymatic glycerolysis of olive oil was investigated using Tween 80 as surfactant, n-butanol as co-surfactant and the novel lipase in free/liquid formulation Lipozyme TL 100L as catalyst. Experimental design was used to evaluate the effect of enzyme load and reaction temperature on the feedstock conversion. Enzyme load and system temperature were significant variables in the statistical design and the best condition was found at 35°C, 7.5 vol% of Lipozyme TL 100L and glycerol to oil volumetric ratio of 2:1 with conversion of TAG at approximately 98% after 2 h of process. A mathematical model based on the Ping-Pong Bi-Bi mechanism was used to describe the reaction kinetics. The model adequately described the behavior of the system and can be a useful tool for the design of reactors in larger scales.     

Flow characteristics of fresh air discharged from a ventilation duct for mine ventilation

Journal of Mechanical Science and Technology - Regarding mine ventilation in a tunnel with one mining face, the turbulent flow structure and Mean age of air (MAA) of fresh air discharged from the...     

Impedance Spectroscopy of (Bi1/2Na1/2)TiO3–BaTiO3 Ceramics Modified with (K0.5Na0.5)NbO3

The electrical and dielectric properties of (1 ? x)(0.94Bi_1/2Na_1/2TiO₃–0.06BaTiO₃)–x(K_0.5Na_0.5NbO₃) with x = 0, 0.03, 0.09, 0.18 have been investigated by impedance spectroscopy over a wide temperature range. The dc conductivity of the ceramics follows the Arrhenius law with an activation energy ranging from ~1.20 to 1.50 eV. Measurements under different atmospheres show the materials exhibit n‐type semiconducting behavior at elevated temperatures. The presence of a highly polarizable phase for all compositions is revealed by electric modulus (M″) spectra. The Burns temperature decreases with increasing KNN content. The change in temperature‐dependent permittivity with composition is explained by the difference in thermal evolution of polar nanoregions induced by the addition of KNN.     

Ionic liquid recovery alternatives in ionic liquid‐based three‐phase partitioning (ILTPP)

Ionic liquid‐based three‐phase partitioning (ILTPP) is a promising technique to recover high‐added value proteins at the liquid–liquid interface. Its economic and environmental performance highly depends on the net ionic liquid consumption. Alternatives to maximize the fraction of ionic liquid that can be recycled are studied. It is demonstrated that the addition of extra salt, previously proposed in literature, has a very limited effect on ionic liquid recovery for relatively high protein concentrations in the feed stream, and that it may even lead to an increase of the ionic liquid losses under certain conditions. However, small additions of salt are shown to be effective and profitable from an economic point of view. Vacuum evaporation is shown to allow for the complete ionic liquid and salt recovery, reinforcing the sustainability and viability of ILTPP processes. © 2014 American Institute of Chemical Engineers AIChE J, 60: 3577–3586, 2014     

Effect of thermal history during drying and curing process on the chain orientation of rod-shaped polyimide

Chain orientation in polyimide (PI) film is influenced by the thermal history during drying and curing process. The amount of residual solvent and the degree of imidization, among other factors, play a major role in determining the chain orientation during the process. In the present study, poly(amic acid), the precursor of PI, coated on the glass substrate was imidized to PI through different drying and curing protocols. On the way of complete imidization, the residual solvent concentration and the degree of imidization were characterized using confocal Raman spectroscopy. The poly(amic acid) began to imidize quickly while retaining more solvent in the film as the initial drying temperature increased. The degree of in-plane chain orientation in fully imidized PI film made by different process protocols was compared using polarized Raman spectroscopy. The fully imidized PI showed the lowest degree of in-plane chain orientation when it was processed by the protocol with the highest drying temperature. The difference in the degree of in-plane chain orientation among different PI films significantly influenced the in-plane thermal expansion coefficient, while no significant change in crystallinity or glass transition temperature was observed.     

Quantitative analysis of microbial community structure in two-phase anaerobic digesters treating food wastewater

An acidogenic reactor with a 0.5-L working volume and a methanogenic digester with a 5-L of working volume were operated for 150 days on a continuous mode to investigate the structure of a microbial community during food wastewater treatment. During the steady state of anaerobic digestion, volatile solids (VS) removal efficiency in the pilot plant was approximately 65%. The bacterial population was higher than any other methanogens detected during the entire anaerobic process and treatment of raw food wastewater. Methanomicrobiales (MMB), Methanosarcinales (MSL), and Methanobacteriales (MBT) were detected during digestion. The methanogenic population present in the acidogenic reactor was directly affected by the archaeal community in raw food wastewater. However, the shift of microbial community in the methanogenic digester was relatively gradual. The performance of methanogenic digester might be more related to the change of microbial metabolism affected by the physicochemical properties of the input substrate.     

The effect of the viscosity ratio of dispersed phase to matrix on the rheological,morphological, and mechanical properties of polymer blends containing a LCP

The effect of the viscosity ratio of the dispersed LCP phase to the polystyrene/poly(phenylene oxide) (PS/PPO) thermoplastic matrix on the rheological, morphological, and resultant mechanical properties of the LCP blends was investigated. The viscosity of PS/PPO is largely dependent on the blend composition, so that different levels of viscosity ratios of dispersed LCP phase to PS/PPO thermoplastic matrix are obtained by using PS/PPO premixtures of different blend ratios as a thermoplastic matrix. When the viscosity of the LCP dispersed phase is lower than that of the thermoplastic matrix, finely distributed fibril structure of LCP is obtained. Tensile modulus of injection molded specimens show a positive deviation from the additive rule when the viscosity ratio (η_LCP/η_matrix) is smaller than unity. These improvements in tensile modulus are attributed to the formation of finely distributed LCP fibrils. © 1996 John Wiley & Sons, Inc.     

Migratory behaviour of adult fast-growing brown trout (Salmo trutta,L.) In relation to water flow in a regulated Norwegian river

The migration pattern of spawners of brown trout (Salmo trutta) in relation to water flow was analysed by radio-tracking in the regulated River Gudbrandsdalslågen, Norway. During the upstream spawning migration in the high flow period, trout (2–12 kg) were caught, tagged and released 15 km downstream of a fish ladder at the Hunderfossen waterfall. The released fish displayed a systematic and directional upstream movement to the outlet of the tunnel from the hydroelectricity plant. In autumn and winter there is a minimum water discharge of 20–2 m³/s on p.s. in the river between the dam and the outlet of the tunnel, which has a discharge of 200–300 m³/s. When the water flowing over the Hunderfossen dam decreased to 20 m³/s, the ascent of brown trout up the river stopped and fish periodically entered the power plant tunnel. To determine the flow necessary to attract fish into the spawning reach above the tunnel outlet, two experiments were undertaken using 12 and 17 radio-tagged trout. In the first experiment, 60 m³/s of water released for 24 h resulted in the migration of 50% of the trout up the river. The second experiment, releasing 60 m³/s for 24 h, followed by 30 m³/s for 24 h two days later, resulted in the migration of 60% of the trout. Only one fish ascended the river at a flow of 30 m³/s. It is recommended that a repeated release of water at 60 m³/s is made in periods of minimum water discharge to save the spawning migration. The results demonstrate the advantage of using radio-tracking in experiments dealing with fish migration in relation to water-flow management.     

Water soluble polymeric nanofibres for rapid flocculation and enhanced dewatering of mature fine tailings

Water-soluble polymer flocculants have been used to efficiently release entrapped water in oil sands tailings by bridging fine particles to create large heavier flocs which can then settle faster and release water more efficiently. Due to their initial interaction with the fine particles suspended in tailings, polymer nanofibres may perform better than their parent polymers because of the entire surface of the nanofibres being fully accessible to the fine particles. In this work, commercially available poly(acrylamide-co-diallyl dimethylammonium chloride) was chosen as a basis for this study. Initial settling rate, supernatant turbidity, water recovery, capillary suction time, and solids content were measured to determine the effect of polymer nanofibres on solid-liquid separation. The solid forms of the polymer (either as nanofibre or powder) perform better than the polymer solution in each test, with optimum dosages of 5 wt% mature fine tailings (MFT) loading. Nanofibres could achieve settling rates of 60 m/h, while the other forms were only able to achieve 42 m/h. Additionally, the turbidity of the supernatant obtained after flocculation with nanofibres was 15 nephelometric turbidity units (NTU), while the polymer solution and powder produced turbidites of 162 NTU and 70 NTU, respectively. In addition, polymer nanofibres and powders generated larger flocs compared to the polymer solution, which produced small, homogenized flocs.     

Improving the flame retardancy of polypropylene foam with piperazine pyrophosphate via multilayering coextrusion of film/foam composites

A series of 16-layer polypropylene/flame retardant (PP/FR) film/foam composite structures were produced by microlayer coextrusion. A highly branched PP was used in the foam layers to increase strain hardening and cell stability, while the PP used in the film layers was a high shear viscosity grade to confine bubble growth. In addition to improved tensile properties, the PP/FR composite film/foams exhibited five times the compression modulus of PP/FR composite foams at each FR loading level. The thermal stabilities of the composites were investigated, exhibiting three step decompositions. The FR particles were effective in decreasing flammability by forming intumescent char. The PP/FR-film/foam-20 showed self-extinguishing behavior in a modified vertical burn test, while the PP/FR-foam-20 sample continued to burn. Cone calorimetry demonstrated that PP/FR film/foams had lower heat release than PP/FR foams due to the unique alternating film/foam structure of PP/FR film/foams. Scanning electron microscopy imaging of the residual chars from fire testing that the PP/FR composite film/foams showed a more continuous protective char surface when compared with PP/FR composite foams at each FR concentration. The combined data indicate that the formation of a surface film on top of a foam ensures a robust intumescent fire protective barrier for partly foamed materials and shows a new way toward lightweight materials with improved fire safety performance. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48552.