Fabrication of a pilot scale module of thin film composite hollow fiber membrane for osmotic pressure‐driven processes

Polyamide thin film composite hollow fiber membranes have advantages in their unique structure compared to flat sheet membranes. This study examined interfacial polymerization methods for fabricating pilot scale hollow fiber membranes (membrane area: 1.2 m², number of hollow fiber strands: 1200). For use in osmotic pressure‐driven processes, a one‐pot hydrophilic interfacial polymerization procedure was developed simultaneously to modify the surface property and synthesize polyamide thin film. With the procedure, a pilot scale module has a water flux of 13 LMH using a draw solution of 0.6M NaCl and a feed solution of distilled water through the design of the module configuration. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46110.     

Continuous operation of membrane bioreactor treating toluene vapors by Burkholderia vietnamiensis G4

A laboratory-scale biofilm membrane bioreactor inoculated with Burkholderia vietnamiensis G4 was examined to treat toluene vapors in a waste gas stream. The gas feed side and nutrient solution were separated by a composite membrane consisting of a porous polyacrylonitrile (PAN) support layer coated with a very thin (0.3 μm) dense polydimethylsiloxane (PDMS) top layer. After inoculation, a biofilm developed on the dense layer. The biofilm membrane bioreactor was operated continuously at different residence times (28–2 s) and loading rates (1.2–26.7 kg m⁻³ d⁻¹), with inlet toluene concentrations ranging from 0.21 to 4.1 g m⁻³. The overall performance of the membrane bioreactor was evaluated over a period of 165 days. Removal efficiencies ranging from 78% to 99% and elimination capacities from 4.2 to 14.4 kg m⁻³ d⁻¹ were observed after start-up period depending on the mode of operation. A maximum elimination capacity of 14.4 kg m⁻³ d⁻¹ was observed at a loading rate of 17.4 kg m⁻³ d⁻¹. Overall, the results illustrate that biofilm membrane reactors can potentially be more effective than conventional biofilters and biotrickling filters for the treatment of air pollutants such as toluene.     

Decision support systems in water resources in the demarcated region of Douro – case study in Pinhão river basin,Portugal

This paper puts forward the importance of decision support systems (DSS) for the planning and management of water resources. A case study of the Pinhão river basin, in Portugal, is presented. Given the importance of vineyards in the Douro region, it is important to determine if water availability will be enough to meet present and future water demands. In order to answer this question, DSS tools were used to assess different scenarios. The MIKE BASIN software was used in the hydrographical basin of Pinhão river, assisted by a geographic information system, GIS, which allowed the modelling of the basin, both temporally and spatially, facilitating the visualisation and interpretation of results. According to the attained results, it was verified that, at present, the hydrographical basin meets the considered water needs. The DSS proved to be an important tool to assist the decision‐making process in the studied river basin.     

Kinetics of nitrate and perchlorate removal and biofilm stratification in an ion exchange membrane bioreactor

The biological degradation of nitrate and perchlorate was investigated in an ion exchange membrane bioreactor (IEMB) using a mixed anoxic microbial culture and ethanol as the carbon source. In this process, a membrane-supported biofilm reduces nitrate and perchlorate delivered through an anion exchange membrane from a polluted water stream, containing 60 mg/L of NO₃⁻ and 100 μg/L of ClO₄⁻. Under ammonia limiting conditions, the perchlorate reduction rate decreased by 10%, whereas the nitrate reduction rate was unaffected. Though nitrate and perchlorate accumulated in the bioreactor, their concentrations in the treated water (2.8 ± 0.5 mg/L of NO₃⁻ and 7.0 ± 0.8 μg/L of ClO₄⁻, respectively) were always below the drinking water regulatory levels, due to Donnan dialysis control of the ionic transport in the system.Kinetic parameters determined for the mixed microbial culture in suspension showed that the nitrate reduction rate was 35 times higher than the maximum perchlorate reduction rate. It was found that perchlorate reduction was inhibited by nitrate, since after nitrate depletion perchlorate reduction rate increased by 77%. The biofilm developed in the IEMB was cryosectioned and the microbial population was analyzed by fluorescence in situ hybridization (FISH). The results obtained seem to indicate that the kinetic advantage of nitrate reduction favored accumulation of denitrifiers near the membrane, whereas per(chlorate) reducing bacteria were mainly positioned at the biofilm outer surface, contacting the biomedium. As a consequence of the biofilm stratification, the reduction of perchlorate and nitrate occur sequentially in space allowing for the removal of both ions in the IEMB.     

Physical examination of arteriovenous fistula: The influence of professional experience in the detection of complications

Vascular access is one of the leading causes of mobilization of financial resources in health systems for people with chronic kidney disease on hemodialysis. Physical examination of the arteriovenous fistula (AVF) has demonstrated its effectiveness in identifying complications. We decided to evaluate the influence of nurses' professional experience in the detection of complications of the AVF (venous stenosis and steal syndrome). The study took place in eight hemodialysis centers between May and September of 2011 in the north of Portugal. Sample was constituted by registered nurses. The nurses involved in the experiment were divided in two groups: those who had more than 5 years of experience and those who had less than 5 years of experience. Ninety‐two nurses participated in the study: 34 nurses had less than 5 years of professional experience and 58 had more than 5 years of professional experience. In the practices considered by nurses in the detection of venous stenosis, there were no differences observed between the groups (P > 0.05). In steal syndrome, there were no differences observed between the groups in the practices of the nurses in the detection of this complication of the AVF (P > 0.05). We concluded that professional experience does not influence the detection of venous stenosis and steal syndrome.     

Mortar composition defined according to rheometer and flow table tests using factorial designed experiments

This paper reports the effects of distinct contents of silica fume (SF), superplasticizer (SP) and water/binder ratio (W/B) in mortars. Samples with SF (0–10 wt%), SP (1.0–1.2 wt%) and W/B ratio (0.30–0.35) were produced. Flow table test and rheometry were used as parameters to formulate mortars by means of a factorial design experiment. Setting time, water absorption, apparent porosity and compressive strength of mortars at 28 days were also determined. Mortar formulations with lower fluidity are restricting when a rheometer was used. For higher torques, adjustments with the regressive equation of the Bingham model are less accurate, since the flow behavior is less constant. On the other hand, mortars with higher fluidity it is limited by spread test. The spread value on flow table test is more related to yield stress than to plastic viscosity. The design experiments identified the main factors (SF, SP and W/B) and their interactions for all properties on the fresh and hardened state, showing that experimental design with multiple regression equations is an appropriate tool to be applied in this case. Water content was the controlling parameter for practically all properties studied.     

Innovation regional planning and latent dimensions: the case of the Algarve region

Regional innovation systems (RSI) concept is an important theoretical framework to analyse regional profiles of regions when trying to understand Innovation but it has also been used by practioners to design and implement policies. This study hopes to contribute to the understanding of the Algarve RSI, a peripheral Portuguese region in the National and European framework, where an economic growth is supported by Tourism, which leaves it out of the group of poorest regions when the GDPpc indicator is taken in account. The regional profile, the comparison with the other European regions and the characterisation of RSI following developed typologies are discussed in this paper. Through the analysis of 175 regions of the EU 15 the study seeks to find the dimensions underlying the innovative phenomena and to create homogeneous groups of regions that display similar profiles. Factorial Analysis was used to reduce the dimension of data from a barrage of regional indicators such as: Critical Mass of Territories, Economic Performance, Level of Wealth, Employment Market, Sectoral Structure of the Economy, Age Group Structure, Education and Training, Technological Employment, R&D and Patents. Having determined the four main factors with significant results (Technological Innovation, Human Capital, Economic Structure and Availability of the Employment Market) what followed was a hierarchical analysis of Clusters, resulting in five groupings of regions: Disadvantaged Regions, Average Regions, Central Regions, Large Economic Centres and Innovating Regions. A synthesis of the recent Regional Innovation Strategies for the Algarve is presented including previous experiences (Ettirse and INOVAlgarve) and the Algarve’s Regional Innovation Plan, which will try to create a pathway for regional development supported by knowledge-based activities for a more diversified regional economy.