高速公路收费站车辆能耗研究

车辆通过高速公路收费站时,需要减速或停车缴费,当车辆较多时,容易形成排队,产生大量延误,大大削弱了车辆的运行效率,增加了车辆的能耗,同时使得车辆尾气的排放量增加,严重污染了环境。本文使用排队论知识对收费站车辆排队与疏散情况进行分析,减少车辆的排队等候时间和驶离站口所需时间,以达到减少行车能耗的目的。最后,通过一个实例给出几种收费方式下的能耗,并给出了相应的分析和建议,可为高速公路收费方式和能耗研究提供一定的参考。     

Antibacterial and corrosive properties of copper implanted austenitic stainless steel

Copper ions were implanted into austenitic stainless steel (SS) by metal vapor vacuum arc with a energy of 100 keV and an ions dose range of (0.5-8.0)×1017 cm-2. The Cu-implanted SS was annealed in an Ar atmosphere furnace. Glancing X-ray diffrac-tion (GXRD), transmission electron microscopy (TEM) and Auger electron spectroscopy (AES) were used to reveal the phase compositions, microstructures, and concentration profiles of copper ions in the implanted layer. The results show that the antibacterial property...     

简论《周易》对《汉书·艺文志》的影响

班固的《汉书·艺文志》源于刘向及其子刘歆的《七略》,是我国现存最早的目录学文献。《汉书·艺文志》中多处引用《周易》,并尊《周易》为“五经之原”,充分体现了汉初《周易》在学术界及思想界的重要地位,从中还可看出《周易》在汉初已成为儒家立论言说的理论基础及辨章学术,考镜源流的“万方之略”。     

叶盘结构频率转向特征的量化分析研究

研究叶盘结构频率转向的曲线特征,是预测叶盘结构的失谐敏感性及振动局部化程度的重要前提。文章基于叶盘系统的集中参数模型,分析了频率转向曲线特征参数(频率曲线转向处曲率、频率曲线斜率、两频率曲线转向处最小距离)与叶盘系统结构参数(耦合刚度,轮盘质量)之间的内在联系,仿真研究了频率转向曲线特征参数随叶盘系统结构参数的变化规律。研究结果表明:频率曲线转向处曲率越大(或斜率越大),系统失谐敏感性越大;频率转向曲线间隙处附近的系统模态局部化变化剧烈,该区域模态对结构失谐非常敏感。     

Separation of nanocolloids driven by dielectrophoresis: A molecular dynamics simulation

The nonequilibrium molecular dynamics (MD) method was used to model the nanocolloids and the solvent particles. By introducing a non-uniform electric field, colloids were polarized to have opposite polarities. Separation of colloids driven by dielectrophoresis (DEP) could be seen clearly under a strong electric field at low temperatures. Analyzing the ratio of DEP velocities of colloids to thermal velocities of neutral solvent particles showed that when the ratio was correspondingly big, collision between colloids and solvent particles would be intense, making the DEP velocity of colloids fluctuate frequently. By changing the electric field strength, it was found that the enhancement of electric field strength would quicken the separation of colloids. But when the electric field strength increased to a certain degree, the separation motion would be slow because of the strong friction resistance of the solvent particles to the colloids. Moreover, studying the separation reason of colloids based on the potential energy showed that after colloids were polarized, the attractive potential energy among the colloids would be weaker than before, while the increase of temperature would reduce the attractive potential energy and increase the repulsive potential energy, which accorded with the DLVO theory. Supported by the National Hi-Tech Research and Derelopment Program of China (“863” Project) (Grant No. 2006AA04Z351) and the National Natural Science Foundation of China (Grant Nos. 50675033, 30770553)     

Rapid prediction method for nonlinear expansion process of medical vascular stent

A neural network model with high nonlinear recognition capability was constructed to describe the relationship between the deformation impact factors and the deformation results of vascular stent.Then,using the weighted correction method with the attached momentum term,the network training algorithm was optimized by introducing learning factor η and momentum factor ψ,so the speed of the network training and the system robustness were enhanced.The network was trained by some practi-cal cases,and the statisti...     

Fractional partial differential equation denoising models for texture image

In this paper,a set of fractional partial differential equations based on fractional total variation and fractional steepest descent approach are proposed to address the problem of traditional drawbacks of PM and ROF multi-scale denoising for texture image.By extending Green,Gauss,Stokes and Euler-Lagrange formulas to fractional field,we can find that the integer formulas are just their special case of fractional ones.In order to improve the denoising capability,we proposed 4 fractional partial differential equation based multiscale denoising models,and then discussed their stabilities and convergence rate.Theoretic deduction and experimental evaluation demonstrate the stability and astringency of fractional steepest descent approach,and fractional nonlinearly multi-scale denoising capability and best value of parameters are discussed also.The experiments results prove that the ability for preserving high-frequency edge and complex texture information of the proposed denoising models are obviously superior to traditional integral based algorithms,especially for texture detail rich images.     

VB与Matlab混合编程在梯度胶片制作中的应用

在梯度胶片制作系统的设计中,为了完成制胶系统上位机数据计算、图形显示、系统管理软件的设计,采用Matlab函数根据采样数据合出步进电机进给控制曲线,结合VB将曲线和数据显示在人机交互界面上,将所计算的参数提供给下位控制系统,系统通过曲线插补计算对步进电机进行控制来完成胶片制作.经实践检验,这种方法所设计的监控程序功能完善、界面良好、操作方便.     

油气井钻进钻铤进动特性仿真研究

油气井钻进破岩过程发生于地下几千米,难以获取井底钻具组合的运动状态.井底钻具组合与岩石的相互作用产生多种形式的振动及振动的耦合.为进一步研究破岩引发钻进中振动的产生机理,建立了井底钻具组合钻铤段非线性动力学模型,通过数值仿真,分析了破岩过程中转速、钻井液、井底钻具组合偏心距、摩擦等对钻铤段旋转进动的影响.数值研究表明,系统参数的变化导致井底钻具组合进动轨迹的多样性和不可预测性;井底钻具组合受到外力作用,导致钻铤进动出现混沌;钻进过程中钻铤与井壁间会发生周期性碰摩现象,为研究钻进引发钻柱黏滑振动提供新的研究思路.     

Effects of CaO and Na<Subscript>2</Subscript>CO<Subscript>3</Subscript> on the reduction of high silicon iron ores

The effects of CaO and Na₂CO₃ on the reduction of high silicon iron ores at 1 250 °C were studied. The experimental results showed that the metallization rate was significantly hindered by the addition of CaO and Na₂CO₃, particularly at the early stage of roasting, compared to the rate without additives. In the absence of additives, iron oxides were quickly reduced to metallic iron, and fayalite was difficult to form. When CaO and Na₂CO₃ were added, the low reducible iron-containing silicate compounds formed and melted, subsequently retarding the metallization process. The inhibition of Na₂CO₃ was more noticeable than that of CaO, and higher Na₂CO₃ doses resulted in stronger inhibition of the increased metallization rate. However, when Na₂CO₃ was added prior to CaO, the liquid phase formed, which facilitated the growth of the metallic phase. To reinforce the separation of the metallic phase and slag, an appropriate amount of liquid phase generated during the reduction is necessary. It was shown that when 10% CaO and 10% Na₂CO₃ were added, a high metallization rate and larger metallic iron particles were obtained, thus further decreasing the required Na₂CO₃ dosage.