微波物位计测量干扰因素的研究

随着高精度微波物位计在储罐系统中的大量使用,其在实际工况中的测量精度得到了越来越多的关注.从频率源、天线形式、微波的测量技术以及信号的检测和处理算法等几个方面介绍了微波物位计的设计要素.说明了影响微波物位计测量的因素主要体现在安装方式和安装位置、信号的强度以及测量介质气相状况等.详细叙述了实际工作中采用较多的微波物位计的测量值修正方法,对广大工程技术人员的选型、安装和调试,乃至新产品研发具有一定的借鉴和参考作用.     

遗传算法与文本特征选择方法相结合的研究

对文本特征选择的传统方法进行了深入分析并对各自的优缺点进行了详细的对比;其次,通过利用遗传算法自身的寻优特点,把它与传统特征选择方法相结合,并得出了算法。最后,在对各自算法进行了分析,表明了在性能上有了明显的提高。     

飞机电气设备自动测试系统设计

从国内外飞机检测技术的现状入手,通过对飞机电气设备自动化检测的需求进行分析,设计了飞机电气设备自动测试系统,介绍其总体结构和工作原理,详细论述了硬件系统的各部分组成与功能,并给出软件系统的设计方案.在实际应用中,实现了飞机电气设备测试的自动识别,具有良好的扩展性,解决了人工测试方式费时费力的问题.     

Reducing control points in lofted B-spline surface interpolation using common knot vector determination

A new algorithm for reducing control points in lofted surface interpolation to rows of data points is presented in this paper. The key step of surface lofting is to obtain a set of compatible B-spline curves interpolating each row. Given a set of points and their parameterization, a necessary and sufficient condition is proposed to determine the existence of interpolating B-spline curves defined on a given knot vector. Based on this condition, we first properly construct a common knot vector that guarantees the existence of interpolating B-spline curves to each row of points. Then we calculate a set of interpolating B-spline curves defined on the common knot vector by energy minimization. Using this method, fewer control points are employed while maintaining a visually pleasing shape of the lofted surface. Several experimental results demonstrate the usability and quality of the proposed method.     

Layered image coding using the DCT pyramid

A block-based subband image coder that exploits the ability to perform decimation in the discrete cosine transform (DCT) domain to effect a pyramidal data structure is described. The proposed "DCT pyramid" has a distinct feature of improved image rendition properties without the associated blocking artifacts at low bit-rates.     

光通信技术在物联网中的应用

随着物联网的快速发展,越来越多的设备和传感器连接到互联网中,构成了一个庞大的物联网生态系统。这些设备和传感器之间的通信和数据传输至关重要,而传统的无线通信方式却面临带宽、稳定性等方面的限制。基于此,文中首先简要分析了光通信技术在物联网中的应用优势,随后详细阐述了光通信技术在物联网中的具体应用,以供相关人士交流参考。     

Aperture-Adjustable and Repairable Metal-Based MOFs Catalysis Membrane for Water Purification

Precise adjustment of the pore size, damage repair, and efficient cleaning is all challenges for the wider application of inorganic membranes. This study reports a simple strategy of combining dry-wet spinning and electrosynthesis to fabricate stainless-steel metal–organic framework composite membranes characterized by customizable pore sizes, targeted reparability, and high catalytic activity for membrane cleaning. The membrane pore size can be precisely customized in the range of 14–212 nm at nanoscale, and damaged membranes can be repaired by targeted treatment in 120 s. In addition, advanced oxidation processes can be used to quickly clean the membrane and achieve 98% flux recovery. The synergistic actions of the membrane matrix and the selective layer increase the adsorption energy of active sites to oxidant, shorten the electron transfer cycle, and enhance the overall catalytic performance. This study can provide a new direction for the development of advanced membranes for water purification and high-efficiency membrane cleaning methods.     

Proximity-Induced Fully Ferromagnetic Order with Eightfold Magnetic Anisotropy in Heavy Transition Metal Oxide CaRuO3

Ferromagnetic materials with a strong spin-orbit coupling (SOC) have attracted much attention in recent years because of their exotic properties and potential applications in energy-efficient spintronics. However, such materials are scarce in nature. Here, a proximity-induced paramagnetic to ferromagnetic transition for the heavy transition metal oxide CaRuO₃ in (001)-(LaMnO₃/CaRuO₃) superlattices is reported. Anomalous Hall effect is observed in the temperature range up to 180 K. Maximal anomalous Hall conductivity and anomalous Hall angle are as large as ∼15 Ω⁻¹ cm⁻¹ and ∼0.93%, respectively, by one to two orders of magnitude larger than those of the typical 3d ferromagnetic oxides such as La_0.67Sr_0.33MnO₃. Density functional theory calculations indicate the existence of avoid band crossings in the electronic band structure of the ferromagnetic CRO layer, which enhances Berry curvature thus strong anomalous Hall effects. Further evidences from polarized neutron reflectometry show that the CaRuO₃ layers are in a fully ferromagnetic state (∼0.8 μ_B/Ru), in sharp contrast to the proximity-induced canted antiferromagnetic state in 5d oxides SrIrO₃ and CaIrO₃ (∼0.1 μ_B/Ir). More than that, the magnetic anisotropy of the (001)-(LaMnO₃/CaRuO₃) superlattices is eightfold symmetric, showing potential applications in the technology of multistate data storage.     

Point cloud completion via structured feature maps using a feedback network

Computational Visual Media - In this paper, we tackle the challenging problem of point cloud completion from the perspective of feature learning. Our key observation is that to recover the...     

Cryptanalysis of Two Signature Schemes for IoT and Mobile Health Systems

Wireless Personal Communications - Recently, Lee et al. (Sensors 20(14): 3983, 2020) proposed a certificateless aggregate arbitrated signature scheme CLAAS for IoT environments. Addobea et...