Inhomogeneous plastic straining of iron based amorphous alloys

Anisotropic plastic straining has been observed in iron based amorphous alloys. This phenomenon is explained proceeding from the notions about internal stresses in amorphous metal ribbons.     

Influence of Thermal Treatment on Inhomogeneous Plastic Deformation of Rolled Amorphous Strips of Iron-Based Alloys

The effect of thermal treatment on the character of the development of shear bands near the concentrator of stresses in iron-based amorphous alloys has been studied. It was found that rolling facilitates a decrease of the temperature at which inhomogeneous plasticity of the condensed system that does not possess a long-range order disappears; as loading on the indentor increases, the number of semiring-type shear bands in the rolled specimens decreases, with the number and length of the beam-type shear bands being larger than in the original materials.     

Biomass-Derived Bifunctional Cathode Electrocatalyst and Multiadaptive Gel Electrolyte for High-Performance Flexible Zn–Air Batteries in Wide Temperature Range

High-efficiency and low-cost bifunctional electrocatalysts for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), as well as gel electrolytes with high thermal and mechanical adaptability are required for the development of flexible batteries. Herein, abundant Setaria Viridis (SV) biomass is selected as the precursor to prepare porous N-doped carbon tubes with high specific surface area and the 900 °C calcination product of SV (SV-900) shows the optimum ORR/OER activities with a small E_OER–E_ORR of 0.734 V. Meanwhile, a new multifunctional gel electrolyte named C20E2G5 is prepared using cellulose extracted from another widely distributed biomass named flax as the skeleton, epichlorohydrin as the cross-linker and glycerol as the antifreezing agent. C20E2G5 possesses high ionic conductivity from −40 to + 60 °C, excellent tensile and compressive resistance, high adhesion, strong freezing and heat resistance. Moreover, the symmetrical cell assembled with C20E2G5 can significantly inhibit Zn dendrite growth. Finally, flexible solid-state Zn–air batteries assembled with SV-900 and C20E2G5 show high open circuit voltage, large energy density, and long-term operation stability between −40 and + 60 °C. This biomass-based approach is generic and can be used for the development of diverse next-generation electrochemical energy conversion and storage devices.     

Controlled synthesis of a large fraction of metallic single-walled carbon nanotube and semiconducting carbon nanowire networks

Controlled synthesis of both single-walled carbon nanotube and carbon nanowire networks using the same CVD reactor and Fe/Al(2)O(3) catalyst by slightly altering the hydrogenation and temperature conditions is demonstrated. Structural, bonding and electrical characterization using SEM, TEM, Raman spectroscopy, and temperature-dependent resistivity measurements suggest that the nanotubes are of a high quality and a large fraction (well above the common 33% and possibly up to 75%) of them are metallic. On the other hand, the carbon nanowires are amorphous and semiconducting and feature a controlled sp(2)/sp(3) ratio. The growth mechanism which is based on the catalyst nanoisland analysis by AFM and takes into account the hydrogenation and temperature control effects explains the observed switch-over of the nanostructure growth modes. These results are important to achieve the ultimate control of chirality, structure, and conductivity of one-dimensional all-carbon networks.     

Reactive oxygen plasma-enabled synthesis of nanostructured CdO: tailoring nanostructures through plasma-surface interactions

Plasma-assisted synthesis of nanostructures is one of the most precise and effective approaches used in nanodevice fabrication. Here we report on the innovative approach of synthesizing nanostructured cadmium oxide films on Cd substrates using a reactive oxygen plasma-based process. Under certain conditions, the surface morphology features arrays of crystalline CdO nano/micropyramids. These nanostructures grow via unconventional plasma-assisted oxidation of a cadmium foil exposed to inductively coupled plasmas with a narrow range of process parameters. The growth of the CdO pyramidal nanostructures takes place in the solid-liquid-solid phase, with the rates determined by the interaction of plasma-produced oxygen atoms and ions with the surface. It is shown that the size of the pyramidal structures can be effectively controlled by the fluxes of oxygen atoms and ions impinging on the cadmium surface. The unique role of the reactive plasma environment in the controlled synthesis of CdO?nanopyramidal structures is discussed as well.     

Non-thermal plasma enhances performances of biochar in wastewater treatment and energy storage applications

Surface functionalization or modification to introduce more oxygen-containing functional groups to biochar is an effective strategy for tuning the physicochemical properties and promoting follow-up applications. In this study, non-thermal plasma was applied for biochar surface carving before being used in contaminant removal and energy storage applications. The results showed that even a low dose of plasma exposure could introduce a high number density of oxygen-functional groups and enhance the hydrophilicity and metal affinity of the pristine biochar. The plasma-treated biochar enabled a faster metal-adsorption rate and a 40% higher maximum adsorption capacity of heavy metal ion Pb²⁺. Moreover, to add more functionality to biochar surface, biochar with and without plasma pre-treatment was activated by KOH at a temperature of 800 °C. Using the same amount of KOH, the plasma treatment resulted in an activated carbon product with the larger BET surface area and pore volume. The performance of the treated activated carbon as a supercapacitor electrode was also substantially improved by>30%. This study may provide guidelines for enhancing the surface functionality and application performances of biochar using non-thermal-based techniques.     

Plant oil derivatives as additives for lubricants

The possibility of using oxidized, epoxidized, and polymerized fractions of rape and sunflower oils as viscosity and antifriction additives for hydraulic and motor oils was examined. Their biodegradability was evaluated. __________ Translated from Khimiya i Tekhnologiya Topliv i Masel, No. 2, pp. 29–30, May–June, 2006.