基于多信息融合技术的智能汽车防盗报警系统研究与设计

为完善汽车的防盗系统,提出研制的智能汽车防盗报警器是在ARM嵌入式系统的基础上,利用Dempster--Sharer证据理论融合密码识别、加速度传感、GPS全球定位信息,判断车辆的安全状况,再将车况信息通过GPRS无线通信网络发送到车主手机。实验室测试表明,系统实现了监控基本功能并满足实时性,增强了汽车安全性和智能报警性。     

GPU加速的圆弧轨迹Katsevich锥束CT重建算法

通过改进GPU的渲染到纹理策略加速锥束反投影计算,提高了圆弧轨迹Katsevich锥束CT重建算法的执行效率.在CPU中完成投影数据的滤波处理,并将其重排为四通道浮点纹理载人GPU内存;绑定2个浮点输出纹理到帧缓冲对象的不同绑定点,用于将渲染结果输出到纹理,并同时完成反投影数据的累加计算;将矩形网格编码为四叉树结构用于加速物体切片的绘制.实验结果表明,文中算法在较大锥角时仍能重建出高质量图像,并获得接近于实时的重建速度.     

嵌入式系统的安全技术研究

随着嵌入式系统的网络化发展,嵌入式系统的安全将成为嵌入式系统必须考虑的问题。嵌入式系统的资源有限性使它的安全问题比一般的桌面系统更加复杂。因此,如何构建一个安全的嵌入式系统是个很值得研究的问题。同时,嵌入式系统的安全不是安全嵌入式系统的附加功能,安全嵌入式系统要在整个设计过程中考虑安全因素,从而决定采用哪种安全技术。从安全的整体性出发,研究了嵌入式系统的各种安全技术,总结归纳出几种安全增强方式,并指出其相应的应用特点,为如何建立嵌入式系统的安全提供依据。     

Tough Transient Ionic Junctions Printed with Ionic Microgels

Emerging soft ionotronics better match the human body mechanically and electrically compared to conventional rigid electronics. They hold great potential for human-machine interfaces, wearable and implantable devices, and soft machines. Among various ionotronic devices, ionic junctions play critical roles in rectifying currents as electrical p–n junctions. Existing ionic junctions, however, are limited in electrical and mechanical performance, and are difficult to fabricate and degrade. Herein, the design, fabrication, and characterization of tough transient ionic junctions fabricated via 3D ionic microgel printing is reported. The 3D printing method demonstrates excellent printability and allows one to fabricate ionic junctions of various configurations with high fidelity. By combining ionic microgels, degradable networks, and highly charged biopolymers, the ionic junctions feature high stretchability (stretch limit 27), high fracture energy (>1000 Jm⁻²), excellent electrical performance (current rectification ratio >100), and transient stability (degrade in 1 week). A variety of ionotronic devices, including ionic diodes, ionic bipolar junction transistors, ionic full-wave rectifiers, and ionic touchpads are further demonstrated. This study merges ionotronics, 3D printing, and degradable hydrogels, and will motivate the future development of high-performance transient ionotronics.     

声透镜指向性换能器研究

该文利用声学透镜使声波能量聚焦,实现小尺寸换能器窄波束声辐射。利用有限元方法分别建立了单凹面声透镜及双凹面声透镜仿真模型,优化了声透镜结构参数,设计并制作了双凹面声透镜指向性换能器,并在消声水池内对换能器样机和声透镜进行了性能测试。换能器样机辐射面积直径?120 mm,设置声透镜后,提高发送电压响应级4 dB,发射指向性-3 dB波束开角由76°变为约30°(@10 kHz),与仿真计算结果相符。实验结果表明,声透镜有效减小了换能器发射波束宽度,提高了换能器主瓣发送电压响应,验证了双凹面声透镜对优化换能器指向性的效果。     

Face anti-spoofing based on multi-modal and multi-scale features fusion

Face anti-spoofing is used to assist face recognition system to judge whether the detected face is real face or fake face. In the traditional face anti-spoofing methods, features extracted by hand are used to describe the difference between living face and fraudulent face. But these handmade features do not apply to different variations in an unconstrained environment. The convolutional neural network (CNN) for face deceptions achieves considerable results. However, most existing neural network-based methods simply use neural networks to extract single-scale features from single-modal data, while ignoring multi-scale and multi-modal information. To address this problem, a novel face anti-spoofing method based on multi-modal and multi-scale features fusion ( MMFF) is proposed. Specifically, first residual network ( Resnet )-34 is adopted to extract features of different scales from each modality, then these features of different scales are fused by feature pyramid network (FPN), finally squeeze-and-excitation fusion ( SEF) module and self-attention network ( SAN) are combined to fuse features from different modalities for classification. Experiments on the CASIA-SURF dataset show that the new method based on MMFF achieves better performance compared with most existing methods.     

Precisely Aligned Monolayer MoS2 Epitaxially Grown on h‐BN basal Plane

Control of the precise lattice alignment of monolayer molybdenum disulfide (MoS₂) on hexagonal boron nitride (h‐BN) is important for both fundamental and applied studies of this heterostructure but remains elusive. The growth of precisely aligned MoS₂ domains on the basal plane of h‐BN by a low‐pressure chemical vapor deposition technique is reported. Only relative rotation angles of 0° or 60° between MoS₂ and h‐BN basal plane are present. Domains with same orientation stitch and form single‐crystal, domains with different orientations stitch and from mirror grain boundaries. In this way, the grain boundary is minimized and a continuous film stitched by these two types of domains with only mirror grain boundaries is obtained. This growth strategy is also applicable to other 2D materials growth.     

Ultra-dense planar metallic nanowire arrays with extremely large anisotropic optical and magnetic properties

A nanofabrication method for the production of ultra-dense planar metallic nanowire arrays scalable to wafer-size is presented. The method is based on an efficient template deposition process to grow diverse metallic nanowire arrays with extreme regularity in only two steps. First, III–V semiconductor substrates are irradiated by a low-energy ion beam at an elevated temperature, forming a highly ordered nanogroove pattern by a “reverse epitaxy” process due to self-assembly of surface vacancies. Second, diverse metallic nanowire arrays (Au, Fe, Ni, Co, FeAl alloy) are fabricated on these III–V templates by deposition at a glancing incidence angle. This method allows for the fabrication of metallic nanowire arrays with periodicities down to 45 nm scaled up to wafer-size fabrication. As typical noble and magnetic metals, the Au and Fe nanowire arrays produced here exhibited large anisotropic optical and magnetic properties, respectively. The excitation of localized surface plasmon resonances (LSPRs) of the Au nanowire arrays resulted in a high electric field enhancement, which was used to detect phthalocyanine (CoPc) in surface-enhanced Raman scattering (SERS). Furthermore, the Fe nanowire arrays showed a very high in-plane magnetic anisotropy of approximately 412 mT, which may be the largest in-plane magnetic anisotropy field yet reported that is solely induced via shape anisotropy within the plane of a thin film.

Open image in new window

     

'98 Escherichia coli SWISS-2DPAGE database update

The combination of two-dimensional polyacrylamide gel electrophoresis (2-D PAGE), computer image analysis and several protein identification techniques allowed the Escherichia coli SWISS-2DPAGE database to be established. This is part of the ExPASy molecular biology server accessible through the WWW at the URL address http://www.expasy.ch/ch2d/ch2d-top.html . Here we report recent progress in the development of the E. coli SWISS-2DPAGE database. Proteins were separated with immobilized pH gradients in the first dimension and sodium dodecyl sulfate-polyacrylamide gel electrophoresis in the second dimension. To increase the resolution of the separation and thus the number of identified proteins, a variety of wide and narrow range immobilized pH gradients were used in the first dimension. Micropreparative gels were electroblotted onto polyvinylidene difluoride membranes and spots were visualized by amido black staining. Protein identification techniques such as amino acid composition analysis, gel comparison and microsequencing were used, as well as a recently described Edman "sequence tag" approach. Some of the above identification techniques were coupled with database searching tools. Currently 231 polypeptides are identified on the E. coli SWISS-2DPAGE map: 64 have been identified by N-terminal microsequencing, 39 by amino acid composition, and 82 by sequence tag. Of 153 proteins putatively identified by gel comparison, 65 have been confirmed. Many proteins have been identified using more than one technique. Faster progress in the E. coli proteome project will now be possible with advances in biochemical methodology and with the completion of the entire E. coli genome.     

Die shape optimisation for net-shape accuracy in metal forming using direct search and localised response surface methods

In this paper, three direct search algorithms, i.e. a modified simplex, random direction search and enhanced Powell’s methods together with a new localised response surface method are presented and applied to solve die shape optimisation problems for achieving net-shape accuracy in metal forming processes. The main motivation is to develop efficient and easy to implement optimisation algorithms in metal forming simulations which often involve complex tool and workpiece interaction and coupled thermal and mechanical analysis. Three case studies are presented including a simple upsetting, a 2D blade forging and a forward extrusion problem. In all cases, the objective was to achieve net-shape accuracy of the formed parts, one important criterion for precision forming. C+ + programs were developed to implement these algorithms and to automatically integrate optimisation computation and forging simulation. The optimisation results from the three case problems show that direct search based methods especially the modified simplex and the localised response surface methods are computationally efficient and robust for net-shape forging and extrusion optimisation problems. It is also suggested that these methods can be used in more complex forging problems where die shape design and optimisation are essential for achieving net-shape accuracy.