基于贝叶斯模型与最佳伙伴相似度量的目标跟踪

提出了一种基于产生式与判别式联合模型的视觉目标跟踪算法。首先介绍了一种基于全局颜色特征直方图特征的贝叶斯分类器,检测出若干最有可能属于目标的候选区域,然后利用最佳伙伴相似性度量（Best-Buddies Similarity）得到候选区域与目标模板的相似度,结合概率值与相似度值估计出最优的目标状态。通过划分目标-背景区域模型、目标-干扰区域模型,对可能产生干扰的区域提前进行抑制,降低了长期跟踪可能产生的漂移问题的风险,同时引入了自适应尺度估计机制和在线模型更新策略,以获得更为精准的跟踪结果。在37组具有挑战性的图像序列上与7种优秀的算法对比实验表明,所提出的算法能够有效应对光照变化、遮挡、旋转与尺度变化等多种问题。     

柴达木盆地西南部重力流沉积特征及其沉积模式研究

根据野外露头、岩心观察和测井分析,在柴西南古近纪发现浊流和碎屑流2种重力流沉积。碎屑流以湖底扇的形式发育于山前滨浅湖带;浊流以浊积扇形式发育于半深湖中,这2种重力流在盆缘交替沉积。该区重力流沉积分为陡坡欠补偿型和缓坡过补偿型,前者形成近岸湖底扇+碎屑流—浊积扇沉积组合,后者形成扇三角洲—浊积扇沉积组合。     

损伤变量对复合材料损伤演化过程的影响分析

复合材料层合板损伤模型中的刚度退化需要通过损伤变量来实现。针对通常采用的2种损伤变量定义,给出了统一表达式。此外,损伤刚度矩阵是损伤变量的函数,基于应变等效假设推导了三维损伤刚度矩阵,从而避免了对损伤刚度矩阵的人为假定。最后,通过复合材料层合板在冲击载荷作用下的数值模拟,讨论了损伤变量的2种定义对数值结果的影响,表明损伤变量的不同定义对分层和基体损伤分布存在一定的影响,对冲击载荷的影响不大。建议在复合材料损伤模拟中,应予关注损伤变量。     

多点泰勒展开的渐进构造和显式计算及应用

渐进式构造公式具有渐进性,即假设得到n次逼近阶的n次多项式且需要计算具有n+1次逼近阶的n+1次多项式时,在n次多项式的基础上增加一项新的多项式及其对应的常系数即可,从而极大地简化了相应的计算量,且在多项式逼近等方面有着较重要的应用。该文给出了多点泰勒展开式的渐进式构造方法及其显式公式,并应用于曲线的逼近问题中。数值例子表明,与已有的方法相比,该文方法在次数变化时具有更小的计算量,或更好的逼近效果。     

生物拆分制备(S)-α-乙基-2-氧-1-吡咯烷乙酸工艺研究

耐酪氨酸冢村氏菌(Tsukamurella tyrosinosolvens)E105可选择性催化(R,S)-α-乙基-2-氧-1-吡咯烷乙酸乙酯生物拆分制备左乙拉西坦关键手性中间体(S)-α-乙基-2-氧-1-吡咯烷乙酸.通过单因素实验和响应面法对菌株产酶培养条件进行优化,并考察含酶静息细胞催化制备(S)-α-乙基-2-氧-1-吡咯烷乙酸的反应过程.结果表明:最优产酶培养条件为装液量30%,接种量4%,发酵36h;培养基组成为葡萄糖17.70g/L,酵母膏16.53g/L,NH4Cl 9.5g/L,K2HPO42g/L,KH2PO41g/L,NaCl 0.6g/L,MgSO4·7H2O 0.5g/L,初始pH值7.32.在优化条件下,酶活力为19.33U/g,细胞干重达4.13g/L,分别较优化前提高了32.6%和60.1%.当细胞加量为30g/L,底物浓度60mmol/L,反应体系为300mL,拆分24h后,产率和ee值分别为48%和99%,(S)-α-乙基-2-氧-1-吡咯烷乙酸浓度达28.8mmol/L,较优化前提高了32.1%.     

Dual-responsive shape memory hydrogels with self-healing and dual-responsive swelling behaviors

Shape memory hydrogels (SMHs) can fix the hydrogels in a provisional shape and restore the initial shape under external stimulation. Herein, a dual-responsive shape memory hydrogel with dual-responsive swelling and self-healing properties is presented in this work. The SMHs were fabricated by one-step emulsion copolymerization of acrylic acid (AAc), acrylamide (AAm) and stearyl methacrylate (SMA). Sodium alginate (SA) was introduced as an interpenetrating polymer in the network. With ionic cross-linking between -COO⁻ and Fe³⁺ or saline-reinforced hydrophobic association, the hydrogels can be fixed in a provisional shape, which can be restored by immersing the hydrogels in vitamin C solution or pure water, respectively. When the as-prepared hydrogels were immersed in FeCl₃ solutions, additional ionic cross-linking between Fe³⁺ and -COO⁻ could be formed, thus constructing the dual physically cross-linked (DPC) network, which endows the hydrogels with excellent fracture stress (2.6 MPa) and toughness (5.47 MJ/m³). Besides, the reversible physical cross-linkings endowed the hydrogel with outstanding self-healing capability. Furthermore, the pH and saline responsive swelling properties of the SMHs are additional fantastic properties. Therefore, we believe that this simple strategy provides a great opportunity for the preparation of SMHs with multiple intellectual performances.     

Fine grinding of thermoplastics by high speed friction grinding assisted by guar gum

High speed friction grinding has been used to grind plant and food substances in water but never been explored for grinding of thermoplastics like polylactic acid (PLA), low and high density polyethylene and polypropylene. Such grinding was investigated in this work and was made possible by using 0.5% guar gum solution instead of just water because increasing the viscosity of water reduced their settling and the speed of passing through the grinder. Tensile, flexural, and impact strengths of the plastics were studied and higher grinding efficiency of PLA could be explained by its low elongation-at-break compared to low density polyethylene, high density polyethylene, and polypropylene. The microplastics (2000–45 μm) were studied for mass and particle size distributions and by scanning electron microscopy, ¹³C CP/MAS NMR, Fourier transform infrared spectroscopy, differential scanning calorimetry, and thermogravimetric analysis. In addition, viscosity of guar gum and contact angles was measured. This new technology can produce finely ground microplastics (710–45 μm) for a variety of applications.     

带束层膨胀对轮胎接地印痕的影响研究

研究带束层膨胀对轮胎接地印痕的影响。对比多种普通带束层膨胀的钢丝帘线角度变化法则,分析普通带束层膨胀对轮胎接地印痕仿真准确性的影响;探讨0°带束层钢丝帘线的特性,提出考虑0°带束层预应变的轮胎性能仿真方法,并分析0°带束层预应变对轮胎接地印痕的影响。本研究结果可为轮胎的结构设计、工艺设计和仿真分析方面提供指导。     

Biosorption behaviors of Cu~(2 ),Zn~(2 ),Cd~(2 ) and mixture by waste activated sludge

1Introduction Waste activated sludge is the by-product of sewage treated by activated sludge process.According to incomplete statistic,in China sewage discharge amount is4.474×107m3/d[1],and there are more than100sewage treatment plants with different sc…     

小冲杆测试材料屈服载荷的有限元分析

文章通过ABAQUS有限元分析软件模拟小冲杆试验过程,重点分析2.25Cr1Mo、16MnR、20#、1.25Cr0.5Mo4种材料的小冲杆屈服载荷。试验结果表明,有限元模拟得到的材料屈服载荷与常规拉伸试验所得出的屈服强度存在显著的线性关系,并具有相当高的相关系数。为最终通过小冲杆试验评价材料的屈服强度提供了一条新的思路。