非木本木质素磺酸镁对水泥净浆和砂浆性能的影响

用红外光谱法等测定了非木本木质素磺酸镁的结构特征参数,研究了其对水泥净浆和砂浆性能的影响,并与木本木质素磺酸钙进行了对比。非木本木质素磺酸镁结构中的甲基、酚羟基、芳香环比木质素磺酸钙少;特性黏度为 0. 61mL/g,仅是木质素磺酸钙的 61%;磺化度为 0 78mmol/g,比木质素磺酸钙低约 40%。木质素磺酸镁溶液的最低表面张力为 49 82mN/m,起泡性能与木质素磺酸钙相近。非木本木质素磺酸镁对水泥净浆和砂浆减水分散作用为木本木质素磺酸钙的 86 6% ~91 1%。但掺质量分数 0 5%的木质素磺酸镁的砂浆, 28d的抗压强度比掺木质素磺酸钙的高 70 5%。     

An XML-based approach to represent generic bill of materials

To solve the difficulty in describing the generic bill of material (GBOM) with the conventional tabular structure in a relational database system,a novel XML-based approach is presented to represent GBOM. It can represent and maintain one generic structure that encompasses all variants of a product. With the combination of product-oriented notation,this approach further gives a high degree of flexibility to support the user in the product variant specification task. The generic BOM system is then introduced for the particular product variant,and a prototype system has been developed. It is indicated that the presented approach is feasible.     

自源无线温度检测技术的研究与应用

基于温差模块、DS18B20和红外技术的自源无线温度检测技术,利用故障发热部位与环境的温度差发电自给,解决高压现场内难以获得低压电源的问题;利用红外线传输信号,避免在高压变电站中布线和信号受高压现场的强电磁干扰.实验结果表明,半导体温差模块输出电压与温差在一定范围内呈线性关系,温差越大,输出电压越大.采用带有超低压启动器的DC/DC电压提升电路进行电压提升,解决实际应用中由于温差过小而导致的半导体温差模块输出电压过低,不足以提供所需的电压问题.     

浅析数据仓库中的元数据管理技术

数据仓库是数据库的发展方向之一,对企业管理和决策支持起着重要的辅助作用.简要介绍了数据仓库和元数据的基本概念,重点阐述了元数据的功能、管理、CWM标准、来源,并就元数据具体应用进行了初步的研究和探讨.     

网络融合边界的电信DoS攻击检测*

为了检测网络融合边界的电信拒绝服务攻击,首先针对攻击的类型分别提出了基于呼叫统计或流量信号分析的检测方法,并采用分步骤的策略设计了检测系统,将两种检测算法分别应用于粗检测步骤,再通过精检测步骤确认攻击并找出攻击源.模拟实验结果表明,该方案能够有效地检测出典型的攻击,并能够实时在线检测,具有良好的实用价值,为应对网络融合所带来的新安全问题提供了一种解决方案.     

Effects of coagulation bath temperature on structure and performance of poly （vinyl butyral） hollow fiber membranes via thermally induced phase separation

Poly （vinyl butyral） （PVB） hollow fiber membranes were fabricated via thermally induced phase separation （TIPS）. The effects of coagulation bath temperature （CBT） on the structure and performance of membranes were investigated in detail. The morphologies of the membranes were studied by scanning electron microscopy （SEM）, the performances of water permeability, rejection, breaking strength and elongation were measured, respectively. The results indicate that all the membranes have the asymmetric morphology and the thickness of the skin layer decreases and the pore size of the outer layer increases with the increase of CBT. The permeability of membranes prepared at air gap 1.0 cm and take-up speed 0.253 m/s increases from 1.047×10-7 to 5.909×10-7 m3/（m2·s-kPa） with the CBT increasing from 20 ℃ to 40℃, and sharply increases to 35.226×10 7 m3/（m2.s.kPa）once the CBT arrives at 50 ℃. While the carbonic ink rejections have no significant decrease, totally exceed 98%, but that of acid-maleic acid copolymer greatly decreases with the increase of CBT. Both the breaking strength and elongation decrease with the increase of CBT.     

Bioleaching of pyrrhotite by Sulfobacillus thermosulfidooxidans

The bioleaching of pyrrhotite was investigated using Sulfobacillus thermosulfidooxidans.The effects of pH,pulp concentration,inoculation amount,external addition of ferrous and ferric ions were examined.The pH is found to exert a profound effect on the leaching process for controlling the bacterial activity and precipitation of ferric ions mainly as jarosite.The results show that low pulp content increases the leaching rate of iron.The inoculation amount from 1×107 cell/mL to 1×108 cell/mL has positive effects on the leaching rate.The results also imply that addition of ferrous sulfate（1 g/L） is required for the bacteria to efficiently drive the extraction of iron,however,the leaching efficiency has no obvious enhancement when 2 g/L ferrous sulfate was added.Comparatively,addition of ferric sulfate（2 g/L） significantly inhibits the bioleaching process.At the end of bioleaching,jarosite and sulfur are observed on the surface of pyrrhotite residues by using XRD and SEM.With the passivation film formed by jarosite and sulfur,the continuous iron extraction is effectively blocked.     

基于Maya的人物角色行走运动的设计

阐述在Maya软件中制作人物角色行走的流程以及一些相关注意事项。通过分析人体行走过程的重要特征,详细论述人物角色行走动画的制作过程,探讨Maya技术在人物角色行走动画中的应用技巧。     

基于J2EE的多媒体设备管理系统的设计与实现

该文介绍了多媒体设备管理系统的设计与实现,阐述了J2EE开发该系统的关键技术,重点说明了该系统的功能与特点。     

雷达数字脉压在FPGA上的研究与实现

采用FPGA技术实现雷达数字脉压,克服了DSP处理速度有限、实时性差的问题。本文以自行研制的雷达信号处理PCI卡为平台,详细介绍了数字脉压在FPGA芯片上实现的原理和过程,对脉压中的匹配滤波器进行了优化设计,解决了FP-GA资源相对有限的问题。最后说明了利用FPGA进行数字脉压的优势,为雷达数字脉压的工程实现提出了一条新思路。