Kinetics of synthesis of Li4Ti5O12 through solid-solid reaction

1. Introduction The solid-solid reaction used in synthesizing various kinds of electrochemical materials has many advantages, such as simple process, without using solvent, saving energy, friendly to the environment and easy to obtain good quality materials like nano-size materials. Recently, the manufacturing of electrochemistry materials has been paid more atten- tion due to its increasing needs. Therefore it is a natural interest to study the synthesis of electro- chemical materials by usin…     

Preparation and properties of PAn/ATTP/PE conductive composites

Polyaniline/Attapugite/PE（PAn-ATTP/PE）composites containing particles with core-shell structure were obtained via the two-step blending processs. The experimental condition is as follows： Organo-attapulgite and PAn was obtained by modifying attapulgite with laury benzenesulfonic acid sodium salt and, then added to PE. The electrical conductivity, structure and properties of the composites were studied. Under the function of shear stress, core-shell structure particles with ATTP as the core and PAn as the shell were formed in the composites. The structure of PAn-ATTP/PE composites were characterized by FTIR,XRD,SEM, etc, respectively. The effects of concentration of doping agent on the conductivity and mechanical property of the composites were investigated. The mechanical properties and impact fracture surface of the ternary composites were studied by means of the tensile tester, SEM, etc. The results show that polyaniline encapsulated ATTP enhances the strength of the PE. And the conductivity of PAn-ATTP/PE composites of is improved effectively when polyaniline encapsulated ATTP is added. The composite have good conductivity when 10% polyaniline encapsulated ATTP is added.     

用CAXA电子图板求解冲模压力中心

在模具设计中 ,冲裁模压力中心通常采用解析法或图解法求解。本文提出一种用CAXA绘图软件在设计制图时直接求解的方法 ,快速直接 ,简单方便 ,精度较高。     

冷却条件对超级钢钨极氩弧焊焊接接头组织性能的影响

采用钨极氩弧焊焊接方法对400MPa级超级钢进行焊接，并对焊后空冷和水冷两种冷却条件下的焊接接头进行了组织性能分析。研究结果表明，水冷条件下，其接头的综合力学性能要优于空冷条件，可以应用与实际生产。     

黄金冶炼厂污染源治理技术

本文阐述了采用加温加压无氰解吸、金电解精炼，活性炭酸洗、火法再生产工艺，所产生污染物的治理技术。     

PP／mPE／无机填料三元复合材料的形态结构和力学性能

采用刚性无机填料对茂金属聚乙烯（mPE)弹性体增韧聚丙烯（PP）二元共混体系进行增强，从而制得PP／mPE无机填料三元复合材料。分别探讨了CaCO3用量对复合材料拉伸性能和低温冲击性能影响，并考察了不同填料的增强效果。实验结果表明，由于弹性体的存在，无机填料的增强作用减弱；共混物的低温冲击强度也因填料的加入而大幅度下降，但经过表面处理的高岭土体系的冲击强度反而提高。SEM断裂形貌显示，未经表面处理的填料和基体的界面结合较弱，而改性高岭土则以层状结构分散于基体中，并呈现牢固的界面结合。     

纽结理论与三叶结分子合成研究进展

拓扑学中的纽结理论在化学和生物学中有非常重要的应用,首先介绍了纽结理论在化学中的应用发展,然后对三叶结分子合成方法的发展及其可能的反应机理进行了阐述。     

燃烧固硫反应的动力学和热力学及其影响固硫产物分解因素的研究

煤在高温条件下燃烧不利于固硫反应，并从热力学角度出发，得出了煤燃烧中钙基固硫剂反应自由能与温度的关系函数，由化学反应动力学得出院 硫酸钙分解反应的动力学方程及其相关参数，在还原性气氛中，从理论和实验上都证明了硫酸钙在较低温下会发生二次分解，理论分解温度与实际分解温度非常吻合，煤灰中氧化钙和三氧化二铝的存在，可以提高硫酸钙的分解温度同阳也给出了钙基固硫剂的应用条件。     

论梅州水库的防洪调度与效益分析

根据梅州水库实际调度存在的问题,从水库自身特点及下游防洪的要求出发,对原防洪调度原则及汛限水位进行研究和合理调整,分析论证调整方案的合理性及防洪效益。     

悬浮法合成聚丙烯腈高吸水性树脂

以偶氮二异丁腈为引发剂，用悬浮聚合法合成了交联聚丙烯腈，然后对其进行水解，得到了高吸水性聚丙烯腈。交联剂用量和水解条件对树脂吸水倍数的影响很大。树脂吸去离子水倍数为420倍，平均粒径为250μm。