A hexane solution deposition of SnS2 films from tetrabutyltin via a solvothermal route at moderate temperature

SnS₂ films have been deposited on glass and alumina plate substrates by the reactions between an organotin precursor [tetrabuyltin, (CH₂CH₂CH₂CH₃)₄Sn] and carbon disulfide in n-hexane at the temperature range 180-200 °C for 10-40 h. The reaction system was oxygen free and applied at a moderate temperature. The films so prepared were characterized by techniques of X-ray diffraction, Scanning electron microscopy, Raman and Mössbauer spectroscopies. The films deposited on glass as well as on alumina plate have an average thickness of 30 μm, but have different rose-like morphologies, which are influenced by both the anisotropic growths of crystals and the different substrate structures. Photoluminescence measurements show that the films have an emission peak at approximately 590 nm.     

Reliability of Au bump––Cu direct interconnections fabricated by means of surface activated bonding method

As a room temperature bonding method, surface activated bonding (SAB) method has been introduced to be one of the most appropriate interconnection methods for the next generation of electronic packaging. Thus it is important to study the reliability of SAB interconnection in long term life test.In this paper, interconnections of Au bump and Cu film bonded by SAB method were performed in high temperature thermal aging test. Degradation of properties such as electrical resistance, shear strength of bump and interface microstructure during aging process were studied to investigate the failure mechanism of the interconnection. Intermetallic compound Cu₃Au was found formed at the interface during thermal aging, and it causes evolvement of the properties and failure mode of the interconnection changing in shear test. Results reveal that SAB is suitable for the interconnection between Au bump and Cu film and it is reliable in thermal reliability test.     

精馏塔静态仿真：Ⅰ.静动态混合数学模型的应用

本文为了克服精馏塔静态仿真不易收敛和初值难以给定等难题，巧妙地利用隐含数值积分方法的特点，将稳态与动态数学模型耦合起来，用以求解高难度的非理想精馏塔静态仿真问题。所得静动态混俣模型大大提高了精馏塔静态仿真的鲁棒性，对于高度非理想精馏塔的仿真尤为有效。通过对某丙烯腈萃取精馏塔的静态仿真，充分证明了这种混合模型化方法的可行性。     

^125I,^131I诱发小鼠精子畸形发生率比较

本文选用 ICR 雄性小鼠,经腹腔分别注射不同剂量的~(125)I 及~(131)I,观察并比较它们对小鼠精子畸形发生率的影响及染毒后睾丸中放射性活度的变化。实验结果表明:(1)~(125)I 染毒后4—5周,0、185、370和555 kBq 各组精子畸形发生率分别为9.00‰、9.57‰、11.6‰及13.9‰;~(131)I 染毒后4—5周,上述各组精子畸形发生率分别为8.50‰、12.5‰、14.7‰和15.5‰;在相同注入量下,~(125)I 与~(131)I 诱发小鼠精子畸形发生率的差异各组均不显著(X~2检验,p>0.05)。(2)~(125)I、~(131)I 染毒后2h 至7天内,两者在睾丸中的放射性活度及变化规律相似,即在染毒后2h 达最高值,每克睾丸中~(125)I 和~(131)I 的放射性活度分别占初始注入量(370 kBq)的0.72％和0.50％,然后迅速下降,至一周时,仅分别占初始注入量的0.035％和0.011％。     

虚拟仪器在教学中的应用

主要介绍了Multisim2001中虚拟仪器库中函数发生器、示波器的使用方法及功能；并在Multisim2001环境中仿真单管放大电路、桥式整流滤波电路。由调试结果，分析了其在教学中应用的可行性。     

An algebraic method for processing colored images

An 8-valued commutative ring is developed to process colored images. Algebraic operators are defined to perform a number of operations such as the extraction of the primary colors and contours of different colors.     

冲击回波法检测隧洞混凝土衬砌厚度

冲击回波法是通过接收、分析在混凝土中传播的回波信号，判断结构混凝土厚度和内部质量的新型无损检测技术。室内试验和工程应用研究表明，该方法为隧洞混凝土衬砌厚度检测提供了一个有效的测试手段。     

Bayesian algorithms for simultaneous structure from motion estimation of multiple independently moving objects.

In this paper, the problem of simultaneous structure from motion estimation for multiple independently moving objects from a monocular image sequence is addressed. Two Bayesian algorithms are presented for solving this problem using the sequential importance sampling (SIS) technique. The empirical posterior distribution of object motion and feature separation parameters is approximated by weighted samples. The first algorithm addresses the problem when only two moving objects are present. A singular value decomposition (SVD)-based sample clustering algorithm is shown to be capable of separating samples related to different objects. A pair of SIS procedures is used to track the posterior distribution of the motion parameters. In the second algorithm, a balancing step is added into the SIS procedure to preserve samples of low weights so that all objects have enough samples to propagate empirical motion distributions. By using the proposed algorithms, the relative motions of all the moving objects with respect to the camera can be simultaneously estimated. Both algorithms have been tested on synthetic and real-image sequences. Improved results have been achieved.     

Variational principle of combined energy—Mechanics of laminated structures

The conventional approaches for stress analysis of composite laminates have encountered discontinuity problems. In this paper, the C¹ continuity of displacements in the in-plane directions and C⁰ continuity of displacement along the thickness direction are discussed. Also, the global continuity of transverse stresses and local continuity of in-plane stresses are examined. Then, the formulations of stress analysis in both differential equation form and variational functional form are presented.