The linear viscoelastic properties of copolypropylene–clay nanocomposites

The linear viscoelastic properties of copolypropylene (cPP)–clay nanocomposites (cPPCNs) prepared by melt intercalating with different amounts of clay were extensively examined by rheological measurements. Meanwhile, the clay effects on the cPP confinements were first estimated by calculating the activation energy of different cPP moving units, including the whole molecular chain, the chain segment, and smaller unit such as chain link. The results showed that the stability of cPPCNs melts wrecked when the clay loading was above 5 wt %. An increase in clay loading of cPPCNs gave rise to a strong low frequency solid‐like response (G′ > G″). Unlike the matrix polymer, cPPCN5 (with 5 wt % clay) exhibited a relaxation plateau as relaxation time prolonged above 100 s, and displayed a maximal linear modulus. The variations of the activation energy of different cPP moving units revealed that the mobility of cPP molecular chains was restricted by clay layers, while these restrictions were not only related to the clay loadings but also largely depended on the clay dispersion status in the matrix. The motions of cPP chain segments were greatly limited at 3–5 wt % loading of clay, but drastically activated with the addition of 7 wt % clay due to the increasing stacks of clay layers within the matrix. However, it was found that the presence of clay had little effect on the mobility of small cPP moving units such as chain links. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1523–1529, 2006     

Android平台i-Jetty服务器在智能家居中的应用研究

针对智能家居系统架构复杂、开发难度较大等问题,提出了一种基于Android平台嵌入式Web服务器i-Jetty的智能家居系统方案。在ARM硬件平台及Android软件平台上,采用i-Jetty服务器实现了家居环境信息网络远程监控功能。系统以Mini6410开发板为中央控制器、服务器和室内监控平台,采用蓝牙与被控设备进行通信,通过Linux层驱动加载、Android本地服务和Web服务的联合编程,实现对传感器数据的获取、家电控制和信息发布。实验结果证明了方案的可行性和实用性。     

基于Monte Carlo随机模拟的综合交通网络布局评价与决策方法

针对综合交通网络评价指标权重及属性值具有主观性和随机性的特点,提出了基于模拟运算的布局规划方案排序选优的群体随机决策方法.仿真生成满足集结的多个专家对指标重要性偏好排序统计分布的权重,同时考虑交通需求的不确定性对指标值的影响,结合客观熵权计算方案的综合评价值,由多次模拟得到的排序优势度确定方案的优劣差异.根据设计的仿真流程通过算例说明了方法应用的有效性,评价中考虑了主客观因素及随机性特征,可以为网络布局提供科学决策依据.     

时间触发以太网的分布式任务负载均衡分配方法

对于以时间触发以太网(time-triggered Ethernet,TTE)为互连基础设施的分布式综合化系统,通过将各个任务的物理拓扑、虚拟链路拓扑等多种设计约束属性转化定义为代价函数。提出了一种将信息处理和通信任务指派并映射到分布嵌入式资源的方法,使设计者能够利用TTE网络通信的时间确定性机制,统一地安排处理任务和通信任务。采用模拟退火算法启发式求解优化问题,保证网络节点处理和节点间通信的负载均衡性。通过一个TTE网络拓扑下任务分配的案例,采用软件仿真的形式说明这种方法的适用性。     

二甲基亚砜一步法碳纤维用聚丙烯腈原丝生产工艺

叙述了二甲基亚砜一步法（高转化）高强碳纤维用聚丙烯腈原丝生产的工艺流程。着重讨论了聚合、纺丝的工艺控制。以及工艺控制对聚丙烯腈原丝和最终碳纤维性能的影响。按此工艺生产的聚丙烯腈原丝的质量完全符合高强碳纤维生产的需要。     

甲苯稀释对AlCl3-EMIC型离子液体电镀铝工艺氢脆性的影响

采用甲苯作为AlCl3-EMIC(1-乙基-3-甲基咪唑)型离子液体的稀释剂,其中纯态离子液体由物质的量比为2∶1的无水AlCl3和EMIC组成。对比了纯态和按稀释剂与离子液体体积比为1∶1稀释后电镀铝的外观、微观形貌和氢脆性。结果表明,采用甲苯稀释离子液体虽然可以降低镀液的黏度,改善镀层外观和微观形貌,但对离子液体电镀铝工艺的氢脆性有负面影响。     

Enhanced Thermal Stability of Zinc-Based Titanate (Dielectric) Ceramics Prepared by the Modified Sol–gel Route

A multi-component substitution of Co and Ni was incorporated into ZnTiO₃ to form pure hexagonal Zn_{1− x} (Co_1/2Ni_1/2) _x TiO₃ ( x =0,0.8,0.9,1.0) dielectric ceramic powders by a modified sol–gel route, following heat treatments at 600°C for 3 h and at 800°C for 6 h. Differential scanning calorimetry measurements revealed that the order of increasing thermal stability of solid solution compound Zn_{1− x} (Co_1/2Ni_1/2) _x TiO₃ was ZnTiO₃ (945°C), Zn_0.1Ni_0.9TiO₃ (1346°C), Zn_0.1(Co_1/2Ni_1/2)_0.9TiO₃ (1390°C), and Zn_0.1Co_0.9TiO₃ (>1400°C). Both the dielectric constant and loss tangent reached a maximum at x =0.8 and then decreased with solubility, x , and measurement frequency.     

A general non-local denoising model using multi-kernel-induced measures

Noises are inevitably introduced in digital image acquisition processes, and thus image denoising is still a hot research problem. Different from local methods operating on local regions of images, the non-local methods utilize non-local information (even the whole image) to accomplish image denoising. Due to their superior performance, the non-local methods have recently drawn more and more attention in the image denoising community. However, these methods generally do not work well in handling complicated noises with different levels and types. Inspired by the fact in machine learning field that multi-kernel methods are more robust and effective in tackling complex problems than single-kernel ones, we establish a general non-local denoising model based on multi-kernel-induced measures (GNLMKIM for short), which provides us a platform to analyze some existing and design new filters. With the help of GNLMKIM, we reinterpret two well-known non-local filters in the united view and extend them to their novel multi-kernel counterparts. The comprehensive experiments indicate that these novel filters achieve encouraging denoising results in both visual effect and PSNR index.     

Ink‐eliminated waste paper sludge flour‐filled polypropylene composites with different coupling agent treatments

Ink‐eliminated sludge flour (IESF), waste residue from the recycling treatments of waste paper, was utilized as a new kind of filler to reinforce polypropylene (PP) in this research work. Different coupling agents, including maleated anhydride grafted PP (MAPP), stearic acid (SA), and titanate (NDZ‐101), were used to increase the compatibility between IESF and PP. By using different measurements, the microstructure, morphology, thermal behaviors, and mechanical properties of the IESF/PP composites were investigated in detail. It was found that IESF, as a nucleation agent, not only induced the crystallization orientation of PP but also accelerate the crystallization rate of PP. Just as indicated in the experiments, the presence of IESF has shown the advantages of increasing the dimensional stability, the hardness and the flexural property, and the presence of coupling agents has a favorable effect on the improvement of dimensional stability. Moreover, the coupling agent has minor influence on the mechanical property, even causes some decrease in the impact strength. Among these three coupling agents, MAPP is found to be the best coupling agent for increasing the interfacial adhesion between IESF and PP, and the MAPP addition makes the PP composite possess the quickest crystallization rate and greatest tensile strength. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 513–520, 2003     

微波辐射磷钨酸催化合成环己酮1,2-丙二醇缩酮

在微波辐射下,以磷钨酸为催化剂,对以环己酮和1,2-丙二醇为原料合成环己酮1,2-丙二醇缩酮进行了研究.较系统的研究了反应物投料比、微波辐射功率、微波辐射时间、催化剂用量、带水剂用量诸因素对产品收率的影响.最佳反应条件为:环己酮为0.2mol,n(环己酮):n(1,2-丙二醇)=1.0:1.5,微波辐射功率600W,辐射时间16min,催化剂用量为反应物总质量的0.5%,带水剂(环己烷)15mL.在此条件下,环己酮1,2-丙二醇缩酮的产率可达82.0%.