EFFECT OF TRACE Cr ON PRECIPITATION AND MICROSTRUCTURAL PARAMETERS OF A COMMERCIAL PURITY Al-5.0Zn-1.8Mg ALLOY

本文利用硬度、显微镜和透射电镜系统地研究了微量Cr对工业纯Al-5.0Zn-1.8Mg合金的沉淀过程、临界形核温度T_c~′和组织参数的影响。结果表明,Cr是促进不均匀沉淀和提高T_c~′温度的元素。低温时效(T_a≤160℃)能抑制晶界沉淀桕(GBP)、无沉淀带(PFZ)和基体沉淀相(MPt)的长大;但高温时效(T_a≥180℃)它又能促进这些参数的强烈长大。这些变化特点,可用Cr与过剩空位交互作用的双重性机理来说明。     

浅谈化工建设项目竣工预验收程序和内容

结合作者的实际工作 ,总结了对工程建设实施“三道质量控制工序”的经验 ,强调了过程质量控制的重要性 ,较为系统地介绍了化工建设项目预验收工作的程序和内容     

聚氨酯防水涂料及其市场发展概况

聚氨酯防水涂料是当今最有效的柔性防水材料之一，介绍了聚氨酯防水涂料的发展状况，并对其市场前景进行了展望。     

Effect of cobalt oxide on surface structure of alumina supported molybdena catalysts studied by in situ Raman spectroscopy

A set of Co promoted 10% Mo/Al₂O₃ samples have been characterized by means of Raman spectroscopy under ambient as well as in situ dehydrated conditions. Under ambient conditions, the degree of the polymerization of surface molybdenum oxide species decreases with increasing Co loading. Under dehydrated conditions, the polymeric molybdenum oxide species is absent with the addition of only 0.2% Co. At low Co loadings (2%), before the formation of CoMoO₄ compound, the spectral features are very similar under ambient conditions. Dehydration causes the upward shift of the Mo=O symmetric stretching mode. A broad band around 920–930 cm^–1 was thus observed. This band has been suggested to be associated with the Co-Mo interaction species. In contrast to crystalline CoMoO₄, this species shows a reversibility on H₂ reduction-O₂ reoxidation treatments. From the results obtained, it is proposed that cobalt oxide interacts with the most polymerized molybdenum oxide species to form Co-Mo interaction species and/or crystalline CoMoO₄; therefore, the amount of the surface molybdenum oxide species decreases with a change in the molecular structure as a function of the Co concentration.     

我国烧碱市场分析与展望

回顾了2005年我国烧碱的生产与市场消费情况,分析了2006年国内烧碱市场形势,对“十一五”期间我国烧碱市场总体趋势进行了展望。     

锌基重防腐双涂层防护技术在高速公路护栏上的应用

介绍了双涂层防护技术的进展以及锌基重防腐双涂层防护技术在高速公路护栏上的应用。     

镀液流速对碳化硅微粒与铜共沉积的影响

本文利用易于控制流速的旋转圆盘电极研究了SiC微粒与Cu的共沉积。得出了在不同镀液流动速度下镀得的复合镀层中微粒含量与镀液中微粒浓度以及与电流密度之间的关系曲线,进而探讨了镀液流速对Cu-SiC共沉积的影响。镀液流速通过影响微粒与阴极之间的弱吸附影响微粒在阴极表面的停留,从而对Cu-SiC复合电沉积过程产生很大影响。     

A high propylene productivity over B2O3/SiO2@honeycomb cordierite catalyst for oxidative dehydrogenation of propane

Boron-based metal-free catalysts for oxidative dehydrogenation of propane (ODHP) have drawn great attention in both academia and industry due to their impressive activity and olefin selectivity. Herein, the SiO₂ and B₂O₃ sequentially coated honeycomb cordierite catalyst is designed by a two-step wash-coat method with different B₂O₃ loadings (0.1%-10%) and calcination temperatures (600, 700, 800 ℃). SiO₂ obtained by TEOS hydrolysis acts as a media layer to bridge the cordierite substrate and boron oxide via abundant Si-OH groups. The welldeveloped straight channels of honeycomb cordierite make it possible to carry out the reactor under high gas hourly space velocity (GHSV) and the thin wash-coated B₂O₃ layer can effectively facilitate the pore diffusion on the catalyst. The prepared B₂O₃/SiO₂@HC monolithic catalyst exhibits good catalytic performance at low boron oxide loading and achieves excellent propylene selectivity (86.0%), olefin selectivity (97.6%, propylene and ethylene) and negligible CO₂ (0.1%) at 16.9% propane conversion under high GHSV of 345,600 ml·(g B₂O₃)^-1·h^-1, leading to a high propylene space time yield of 15.7 g C₃H₆·(g B₂O₃)^-1·h^-1 by suppressing the overoxidation. The obtained results strongly indicate that the boron-based monolithic catalyst can be properly fabricated to warrant the high activity and high throughput with its high gas/surface ratio and straight channels.     

羟基烷基磺酸镀液电镀Sn—Pb合金的研究

我国自行研制生产的羟基烷基磺酸电镀Sn-Pb合金镀液已经在部分厂家投产使用.生产实践证明,该镀液能获得不同铅含量的、可焊性优良且镀层结晶细致而光亮的Sn-Pb合金镀层.本研究重点测定了该镀液的电化学性能,如阴极电流效率、分散能力及深镀能力.并对添加剂的作用进行了研究探讨.     

金安金沙江悬索桥隧道式锚碇变形破坏机制研究

隧道式锚碇的变形破坏机制涉及到结构与围岩的协同作用问题。以华丽高速公路金安金沙江悬索桥两岸隧道锚变形破坏机制为研究对象,利用工程类比法评价了其稳定性控制要素,设计了超载数值试验。根据塑性区的扩展过程确定了施工安全监测和需要采取预加固的重点部位,确定了隧道锚围岩的破坏模式。根据锚面监测点位移由mm到cm量级突变确定的两岸锚岩系统极限荷载均为6~8倍设计缆力,则锚岩系统的设计承载力取3倍设计缆力下变形安全是有保障的。丽江岸塑性区在10 P下贯通;华坪岸塑性区在14 P下贯通。设计缆力作用下,丽江岸锚碇最大位移1.5 mm、围岩1.2 mm、地表0.5 mm;华坪岸锚碇最大位移1.7 mm、围岩1.5 mm、地表0.7 mm,其响应顺序为后锚面监测点前锚面监测点锚碇中间岩体地表点,可作为后期结构及围岩安全监测布点和预警的参考,也证明当前设计缆力下变形和强度均是安全的。